The DOI matches its Crossref record.
Harvesting energy via electromagnetic damper: Application to bridge stay cables
Abstract
Energy harvesting from ambient vibration is an emerging and promising solution to the power supply problem associated with autonomous sensors. This article proposes a novel strategy of harvesting damping energy from vibration control devices. A novel system, termed electromagnetic damper cum energy harvester, is employed to fulfill both vibration damping and energy harvesting functions. Electromagnetic damper cum energy harvester is essentially an electromagnetic device connected to a specially designed energy harvesting circuit, which is a buck–boost converter operating in a discontinuous conduction mode. The energy harvesting circuit can achieve satisfactory efficiency without any feedback loop. The effectiveness of the dual-function electromagnetic damper cum energy harvester is demonstrated through a numerical case study of bridge stay cables under wind excitations, in which the major parameters of electromagnetic damper cum energy harvester are determined through a simple design approach. Simulation results project average output power ranging from 82.5 to 2396.8 mW at a wind speed of 9–15 m/s, corresponding to an overall efficiency of 42.3%. The dual-function electromagnetic damper cum energy harvester also exhibits vibration control performance comparable to an optimally designed viscous fluid damper.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Shen and Zhu [103] presented an EMD cum-energy-harvester consisting of an electromagnetic device attached to a circuit. The proposed damper was tested on a scaled cable-stayed bridge.”
From Invited Review: Recent developments in vibration control of building and bridge structures (2017) · cites this paper as [103]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 53
- 10.1088/0964-1726/16/3/R01 · DOI
- 10.1109/TMAG.2007.906150 · DOI
- 10.1088/0957-0233/17/12/R01 · DOI · Paper page
- Bisht SS (2005) Methods for structural health monitoring and damage detection of civil and mechanical systems. MSc Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.
- 10.2749/sed009 · DOI
- 10.1002/stc.179 · DOI
- 10.1088/0964-1726/21/2/025014 · DOI
- 10.1063/1.2344868 · DOI
- 10.1109/TIE.2010.2062477 · DOI
- 10.1109/TIE.2010.2044126 · DOI
- 10.1201/b12352-219 · DOI
- Graves KE (2000) Electromagnetic energy regenerative vibration damping. PhD Thesis, Swinburne University of Technology, Melbourne, VIC, Australia.
- 10.4324/9780203301647 · DOI
- 10.1016/j.jweia.2008.11.003 · DOI
- 10.1061/(ASCE)EM.1943-7889.0000058 · DOI
- 10.1088/0964-1726/20/7/075001 · DOI
- 10.12989/sss.2011.7.5.379 · DOI
- 10.1109/TMAG.2012.2202889 · DOI
- 10.1109/TMECH.2010.2089635 · DOI
- 10.1177/1045389X09357971 · DOI
- 10.1109/TIE.2006.870658 · DOI
- Kovacs I, 1982, Bautechnik, 10, 325
- 10.1109/TPEL.2007.904230 · DOI
- 10.1016/S0022-460X(03)00210-4 · DOI
- 10.1016/0266-8920(90)90007-7 · DOI
- 10.1177/1045389X08098194 · DOI
- 10.1063/1.3436553 · DOI
- 10.1061/(ASCE)1084-0702(2001)6:6(385) · DOI
- 10.1061/(ASCE)0733-9445(1998)124:11(1313) · DOI
- Miller TI, 2010, NSEL Report No. NSEL-022
- Mitcheson PD (2005) Analysis and optimisation of energy-harvesting micro-generator systems. PhD Thesis, Imperial College London, London.
- 10.1016/j.sna.2004.04.026 · DOI
- 10.1109/JPROC.2008.927494 · DOI · Paper page
- 10.1109/TPEL.2003.809379 · DOI
- 10.1109/TPEL.2002.802194 · DOI
- 10.1061/(ASCE)0733-9445(2008)134:1(164) · DOI
- Priya S, 2008, Energy Harvesting Technologies
- Rice SO, 1954, Selected Papers on Noise and Stochastic Processes, 133
- 10.1016/S0140-3664(02)00248-7 · DOI · Paper page
- Scruggs JT, 2004, Structural control using regenerative force actuation networks
- 10.1061/(ASCE)0733-9445(2003)129:7(951) · DOI
- 10.1016/j.sna.2011.04.043 · DOI
- 10.1016/j.sna.2012.04.011 · DOI
- 10.1016/0167-6105(90)90080-V · DOI
- 10.12989/was.2000.3.4.221 · DOI
- 10.1016/j.jsv.2005.10.003 · DOI
- 10.1080/00423119608969226 · DOI
- 10.1109/TPEL.2011.2161675 · DOI
- 10.1177/1045389X12462644 · DOI
- 10.1088/0960-1317/18/10/104008 · DOI
- 10.1109/TPEL.2006.886647 · DOI
- 10.1088/0957-0233/21/2/022001 · DOI
- 10.1016/j.engstruct.2011.09.024 · DOI
Cited by
Sorted by citations
Invited Review: Recent developments in vibration control of building and bridge structures
Ghaedi, K., Ibrahim, Z., Adeli, H., & Javanmardi, A. (2017) · Journal of Vibroengineering · doi:10.21595/jve.2017.18900 · Cited by 146
“Shen and Zhu [103] presented an EMD cum-energy-harvester consisting of an electromagnetic device attached to a circuit.”
Background
Metadata
- Authors
- Shen, W., & Zhu, S.
- Affiliations
- Hong Kong Polytechnic University (HK)
- Venue
- Journal of Intelligent Material Systems and Structures
- Publisher
- SAGE Publications
- Published
- 2014-01-21
- Volume
- 26
- Issue
- 1
- Pages
- 3-19
- ISSN
- 1045-389X (ISSN-L)
- 1530-8138
- OpenAlex
- W1996919768
- Cited by
- 95
- References
- 0
- Citations by year
- 2026: 7 · 2025: 8 · 2024: 3 · 2023: 8 · 2022: 12 · 2021: 7 · 2020: 11 · 2019: 9 · 2018: 11 · 2017: 12 · 2016: 4 · 2015: 3
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Intelligent Material Systems and Structures (publishedVersion)
- PolyU Institutional Research Archive (Hong Kong Polytechnic University) (submittedVersion)
- Funders
- Hong Kong Polytechnic University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Keywords
- vibration energy harvesting, electromagnetic damper, bridge stay cables, ambient vibration, buck-boost converter, discontinuous conduction mode, vibration damping, wind-induced vibration, autonomous sensors, passive vibration control, viscous dampers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review