Fault diagnosis of rolling bearings based on Marginal Fisher analysis
The DOI matches its Crossref record; 33 of the 35 references it cites were found in a registry or an index.
Abstract
Feature extraction plays an important role in fault diagnosis. It is critical to extract the representative features for improving the classification performance. An intelligent fault diagnosis method based on Marginal Fisher analysis (MFA) is put forward and applied to rolling bearings. The high-dimensional features in time-domain, frequency-domain and wavelet-domain are extracted from the raw vibration signals to obtain rich faulty information. Subsequently, MFA excavates the underlying low-dimensional fault characteristics embedded in the high-dimensional feature space by preserving local manifold structure. Thus, the optimal low-dimensional features are obtained to characterize the various fault conditions of rolling bearings and finally fed into the simplest k-nearest neighbor classifier to recognize different fault categories. The diagnosis results validate the feasibility and effectiveness of the proposed fault diagnosis method, compared with the other three similar approaches.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The kNN has been concerned in the research of IFD, especially for fault diagnosis of rolling element bearings [266][267][268][269][270][271][272][273], gears [274][275][276][277], and motors [278].”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [268]
Citations
Cites
Nonlinear Dimensionality Reduction by Locally Linear Embedding
Roweis, S. T., & Saul, L. K. (2000) · Science · doi:10.1126/science.290.5500.2323 · Cited by 14,965 · cited 1×
“Since three papers (Roweis and Saul, 2000; Seung and Lee, 2000; Tenenbaum et al., 2000) of manifold learning were published in Science, an entirely new geometrically motivated approach appeared to deal with high-dimensional nonlinear data.”
BackgroundA Global Geometric Framework for Nonlinear Dimensionality Reduction
Tenenbaum, J. B., Silva, V. D., & Langford, J. C. (2000) · Science · doi:10.1126/science.290.5500.2319 · Cited by 13,585 · cited 1×
“Since three papers (Roweis and Saul, 2000; Seung and Lee, 2000; Tenenbaum et al., 2000) of manifold learning were published in Science, an entirely new geometrically motivated approach appeared to deal with high-dimensional nonlinear data.”
BackgroundIntroduction to Statistical Pattern Recognition
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-27872-x · Cited by 11,031
Goodall, C. (1988) · Technometrics · doi:10.1080/00401706.1988.10488412 · Cited by 8,675
Jolliffe, I. T. (1986) · Springer Series in Statistics · doi:10.1007/978-1-4757-1904-8 · Cited by 8,273
Locality Preserving Projections
He, X., & Niyogi, P. (2003) · neural information processing systems · Cited by 4,498
Face recognition using Laplacianfaces
He, X., Yan, S., Hu, Y., Niyogi, P., & Zhang, H.-J. (2005) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2005.55 · Cited by 3,264 · cited 2×
“, 2005), face recognition (He et al., 2005), handwritten digit recognition (Weinberger and Saul, 2006) and so on.”
BackgroundGraph Embedding and Extensions: A General Framework for Dimensionality Reduction
Yan, S., Xu, D., Zhang, B., Zhang, H.-J., Yang, Q., & Lin, S. (2007) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2007.250598 · Cited by 3,031
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundThe Manifold Ways of Perception
Seung, H. S., & Lee, D. D. (2000) · Science · doi:10.1126/science.290.5500.2268 · Cited by 811
Unsupervised Learning of Image Manifolds by Semidefinite Programming
Weinberger, K. Q., & Saul, L. K. (2006) · International Journal of Computer Vision · doi:10.1007/s11263-005-4939-z · Cited by 692 · cited 2×
“Manifold learning is an effective methodology for feature extraction and dimensionality reduction, which has been widely applied to image processing (Grady et al., 2005), face recognition (He et al., 2005), handwritten digit recognition (Weinberger and Saul, 2006) and so on.”
BackgroundBearing fault diagnosis based on wavelet transform and fuzzy inference
Lou, X., & Loparo, K. A. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00077-3 · Cited by 689 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundWavelet packet feature extraction for vibration monitoring
Yen, G. G., & Lin, K.-C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.847906 · Cited by 545
Fault diagnosis of rotating machinery based on multiple ANFIS combination with gas
Lei, Y., He, Z., Zi, Y., & Hu, Q. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.11.003 · Cited by 500 · cited 1×
“Various timedomain statistical features have been successfully applied to bearing fault diagnosis (Lei et al., 2007).”
MethodAPPLICATION OF WAVELETS TO GEARBOX VIBRATION SIGNALS FOR FAULT DETECTION
Wang, W. J., & McFadden, P. D. (1996) · Journal of Sound and Vibration · doi:10.1006/jsvi.1996.0226 · Cited by 470 · cited 1×
“1=2 ð21Þ Finally, the normalized wavelet packet node energy features in the mth frequency band is Ejm ¼ ejm=Ej ð22Þ Due to its fast computing performance and without producing redundancy in the decomposition (Wang and McFadden, 1996), Daubechies wavelet series are selected as mother wavelets.”
MethodTse, P. W., Peng, Y. H., & Yam, R. (2001) · Journal of Vibration and Acoustics · doi:10.1115/1.1379745 · Cited by 422 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundRolling element bearing fault diagnosis using wavelet packets
Nikolaou, N. G., & Antoniadis, I. A. (2002) · NDT & E International · doi:10.1016/s0963-8695(01)00044-5 · Cited by 377 · cited 2×
“Because of its flexibility, good time-frequency resolution and computational efficiency, WPD has been widely used in bearing feature extraction (Nikolaou and Antoniadis, 2002; Ocak et al., 2007; Jayaswal et al., 2011).”
Ocak, H., Loparo, K. A., & Discenzo, F. M. (2007) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2007.01.001 · Cited by 282 · cited 3×
“To derive more detailed fault information to reflect the operating conditions of bearings, several feature parameters are extracted from various domains (Ocak et al., 2007; Jayaswal et al., 2011; An et al., 2012; Wu et al., 2012).”
BackgroundXu, D., Yan, S., Tao, D., Lin, S., & Zhang, H.-J. (2007) · IEEE Transactions on Image Processing · doi:10.1109/tip.2007.906769 · Cited by 276 · cited 1×
“MFA is an effective technique for feature extraction and dimensionality reduction, which has successfully been applied to face recognition and human gait recognition (Xu et al., 2007; Yan et al., 2007).”
MethodIntelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension
Yang, J., Zhang, Y., & Zhu, Y. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.10.005 · Cited by 275 · cited 2×
“The bearing data has been validated in many researches (Yang et al., 2005, 2007; Li et al., 2009; Yu, 2011) and become a benchmark data set of bearings.”
BackgroundMethodYu, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.02.006 · Cited by 258
Fault diagnosis of rolling element bearings using basis pursuit
Yang, H., Mathew, J., & Ma, L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.03.008 · Cited by 199 · cited 2×
“The bearing data has been validated in many researches (Yang et al., 2005, 2007; Li et al., 2009; Yu, 2011) and become a benchmark data set of bearings.”
BackgroundMethodJayaswal, P., Verma, S., & Wadhwani, A. (2011) · Journal of Vibration and Control · doi:10.1177/1077546310361858 · Cited by 116 · cited 3×
“To derive more detailed fault information to reflect the operating conditions of bearings, several feature parameters are extracted from various domains (Ocak et al., 2007; Jayaswal et al., 2011; An et al., 2012; Wu et al., 2012).”
BackgroundGabor feature-based face recognition using supervised locality preserving projection
Zheng, Z., Yang, F., Tan, W., Jia, J., & Yang, J. (2007) · Signal Processing · doi:10.1016/j.sigpro.2007.03.006 · Cited by 113 · cited 3×
“For more detailed information about SLPP, please refer to He and Niyogi (2003) and Zheng et al. (2007).”
BackgroundMethodModified self-organising map for automated novelty detection applied to vibration signal monitoring
Wong, M. L. D., Jack, L. B., & Nandi, A. K. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.01.008 · Cited by 107 · cited 1×
“A new feature extraction technique based on the statistic characteristics of the power density spectra is proposed in Wong et al. (2006).”
MethodJanjarasjitt, S., Ocak, H., & Loparo, K. A. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.02.051 · Cited by 102
Supervised locally linear embedding projection (SLLEP) for machinery fault diagnosis
Li, B., & Zhang, Y. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.05.001 · Cited by 101 · cited 1×
“It has also been found to be a powerful tool for fault diagnosis of bearings (Li et al., 2009; Li and Zhang, 2011; Yu, 2011).”
MethodAn, X., Jiang, D., Chen, J., & Liu, C. (2011) · Journal of Vibration and Control · doi:10.1177/1077546311403185 · Cited by 68 · cited 1×
“To derive more detailed fault information to reflect the operating conditions of bearings, several feature parameters are extracted from various domains (Ocak et al., 2007; Jayaswal et al., 2011; An et al., 2012; Wu et al., 2012).”
BackgroundMultiple manifolds analysis and its application to fault diagnosis
Li, M., Xu, J., Yang, J., Yang, D., & Wang, D. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.05.001 · Cited by 47 · cited 3×
“It has also been found to be a powerful tool for fault diagnosis of bearings (Li et al., 2009; Li and Zhang, 2011; Yu, 2011).”
BackgroundMethodTypical bearing-fault rating using force measurements: application to real data
Slavič, J., Brković, A., & Boltežar, M. (2011) · Journal of Vibration and Control · doi:10.1177/1077546311399949 · Cited by 45 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundWu, T.-Y., Hong, H.-C., & Chung, Y.-L. (2011) · Journal of Vibration and Control · doi:10.1177/1077546311411755 · Cited by 39 · cited 1×
“To derive more detailed fault information to reflect the operating conditions of bearings, several feature parameters are extracted from various domains (Ocak et al., 2007; Jayaswal et al., 2011; An et al., 2012; Wu et al., 2012).”
BackgroundTrendafilova, I. N. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.02.005 · Cited by 39 · cited 1×
“Therefore, it is important to detect faults in bearings as early as possible and prevent catastrophic machine breakdown (Yang et al., 2007; Trendafilova, 2010).”
Background
Research works printed but not linked: 3
- Grady L, 2005, Proceedings of the Fifth Iasted International Conference on Visualization, Imaging, and Image Processing, 423
- He XF, 2003, Proceedings of the Conference on Advances in Neural Information Processing Systems, 1
- Loparo KA, 2012, Bearings vibration data set
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
A Survey on Fault Diagnosis of Rolling Bearings
Peng, B., Bi, Y., Xue, B., Zhang, M., & Wan, S. (2022) · Algorithms · doi:10.3390/a15100347 · Cited by 170
FaultNet: A Deep Convolutional Neural Network for Bearing Fault Classification
Magar, R., Ghule, L., Li, J., Zhao, Y. S., & Farimani, A. B. (2021) · IEEE Access · doi:10.1109/access.2021.3056944 · Cited by 129
“With bearing failure being one of the major contributors to the downtime of industrial machines, it is very important to address this problem with high reliability and reduce the break-down of machines [6]–[8].”
BackgroundJiang, Y. S., Zhu, H., & Li, Z. (2015) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2015.09.007 · Cited by 114
Amin, A. A., Iqbal, M. S., & Shahbaz, M. H. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.121956 · Cited by 119
Metadata
- Authors
- Jiang, L., Shi, T., & Xuan, J.
- Affiliations
- State Key Laboratory of Digital Manufacturing Equipment and Technology (CN)
- Corresponding author
- Shi, Tielin
- Venue
- Journal of Vibration and Control
- Publisher
- SAGE Publications
- Published
- 2012-11-05
- Volume
- 20
- Issue
- 3
- Pages
- 470-480
- ISSN
- 1077-5463 (ISSN-L)
- 1741-2986
- OpenAlex
- W2042559813
- Semantic Scholar
- 1ad54652974fdef6aa8b7cebc237545332021bee
- Cited by
- 30
- References
- 35
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 1 · 2022: 3 · 2021: 1 · 2020: 3 · 2019: 3 · 2018: 3 · 2017: 3 · 2016: 5 · 2015: 2 · 2014: 1 · 2013: 1
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Vibration and Control (publishedVersion)
- Funders
- Case Western Reserve University
- National Natural Science Foundation of China
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- rolling bearing fault diagnosis, marginal Fisher analysis, feature extraction, vibration signals, manifold learning, low-dimensional feature representation, k-nearest neighbors, wavelet features, frequency-domain features, time-domain features
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.