A normalized Hilbert-Huang transform technique for bearing fault detection
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
Bearings are commonly used in rotary machinery, whereas up to half of machinery malfunctions could be related to bearing defects. Unfortunately reliable fault detection systems still remain a challenging task, especially when bearing defect-related features are nonstationary. A new normalized Hilbert-Huang transform (NHHT) technique is proposed in this paper for vibration-based bearing fault detection. The NHHT for bearing fault detection takes two processes: firstly the vibration signal is denoised to highlight defect-related impulses; and secondly representative features are extracted for bearing fault detection. Vibration signal denoising is carried out by the use of the maximum kurtosis deconvolution filter to reduce impedance effect of transmission path of the measured vibration signal. A novel strategy based on D’Agostino-Person normality is suggested to enhance the distinctive intrinsic mode functions for representative features extraction and formulation for bearing fault detection. The effectiveness of the proposed NHHT technique is verified by a series of experimental tests corresponding to different bearing health conditions, and its robustness in bearing fault detection is examined by the use of data sets from a different experimental setup.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Osman and Wang [113] proposed a normalized HHT (NHHT) technique to tackle the problem of selecting the appropriate distinctive IMF components, especially for bearing health condition monitoring.However, the EMD of the proposed method only processes signals over narrowbands.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [113]
Citations
Cites
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816 · cited 1×
“If a defect occurs on the fixed ring race of a bearing, its corresponding signature can be characterized as stationary, which is relatively easy to analyze using classical data analysis techniques (e.g., statistical indicators) (Jardine et al., 2006).”
MethodA NEW VIEW OF NONLINEAR WATER WAVES: The Hilbert Spectrum
Huang, N. E., Shen, Z., & Long, S. R. (1999) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.31.1.417 · Cited by 2,098 · cited 1×
“In HHT analysis for bearing fault detection, a signal is firstly decomposed into a series of data sequences, called intrinsic mode functions (IMFs), and then bearing health condition is diagnosed by examining the resulting Hilbert spectrum (Huang et al., 2005; Huang et al., 1999).”
MethodA Suggestion for Using Powerful and Informative Tests of Normality
D'agostino, R. B., Belanger, A., & D'agostino, R. B. (1990) · The American Statistician · doi:10.2307/2684359 · Cited by 1,809
A Suggestion for Using Powerful and Informative Tests of Normality
D'agostino, R. B., Belanger, A., & D'agostino, R. B. (1990) · The American Statistician · doi:10.1080/00031305.1990.10475751 · Cited by 1,804 · cited 1×
“The DP test has been proven to be more robust than both skewness and kurtosis for normality testing (D’Agostino et al., 1990), and more powerful than the ShapiroWilk tests (Poitras, 2006).”
BackgroundQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 2×
“time) (Liu et al., 2008a; Qiu et al., 2006).”
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 1×
“As a matter of fact, up to 50% of machinery defects are related to bearing faults (Bellini et al., 2008; Alberto et al., 2010).”
BackgroundWiggins, R. A. (1978) · Geoexploration · doi:10.1016/0016-7142(78)90005-4 · Cited by 960
Model for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931 · cited 1×
“But vibration-based analysis is the most commonly used approach due to its ease of measurement and relatively higher signal to noise ratio (Trajin et al., 2010; Tandon and Choudhury, 1997; McFadden and Smith, 1984), which will also be used in this work.”
MethodFEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879 · cited 2×
“The Morlet wavelet will be used in WT analysis (Liu et al, 2008b; Lin and Qu, 2000), which will be processed at a center frequency of 1,000Hz and with a band of 1,000Hz.”
BackgroundMethodSawalhi, N., Randall, R. B., & Endo, H. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.002 · Cited by 612 · cited 2×
“For example, Endo combined three data analysis processes: the MKD, autoregressive models and the WT for fault detection in gear systems (Endo and Randall, 2007) and bearings (Sawalhi et al., 2007).”
Method
Research works printed but not linked: 2
- Kaewkongka T, 2003, International Journal of COMADEM, 6, 41
- 10.1016/j.ymssp.2009.11.011 · DOI · Paper page
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“Osman and Wang [113] proposed a normalized HHT (NHHT) technique to tackle the problem of selecting the appropriate distinctive IMF components, especially for bearing health condition monitoring.”
MethodFeature Extraction for Data-Driven Remaining Useful Life Prediction of Rolling Bearings
Zhao, H., Liu, H., Jin, Y., Dang, X., & Deng, W. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3059500 · Cited by 196
“Hilbert transform (HT) can transform a real signal into a complex signal [39].”
BackgroundSun, Y., Li, S., Wang, Y., & Wang, X. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107817 · Cited by 156
A Morphological Hilbert-Huang Transform Technique for Bearing Fault Detection
Osman, S., & Wang, W. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2598019 · Cited by 93
“The authors have also proposed a normalized HHT [20] and an enhanced HHT [21] technique for bearing fault detection; although these methods can produce promising results in extracting bearing fault-related features under controlled operating conditions, they still require an approach to adaptively select and integrate…”
BackgroundMethodInfluentialSelf-citationStudy on a Novel Fault Diagnosis Method Based on VMD and BLM
Zheng, J., Yuan, Y. H., Zou, L., Deng, W., Guo, C., & Zhao, H. (2019) · Symmetry · doi:10.3390/sym11060747 · Cited by 38
“To effectively recognize the working state of rolling bearings, many signal processing methods have been proposed in recent years, such as short time Fourier transform (STFT) [14,15], wavelet transform (WT) [16], Hilbert–Huang transform (HHT) [17–19], empirical mode decomposition (EMD) [20–22], entropy [23–25], suppor…”
MethodA smart sensor-based monitoring system for vibration measurement and bearing fault detection
Shukla, A., Mahmud, M., & Wang, W. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/ab8dfc · Cited by 35
Self-citationSelective weighted multi-scale morphological filter for fault feature extraction of rolling bearings
Yu, J., Xiao, C., Hu, T., & Gao, Y. (2022) · ISA Transactions · doi:10.1016/j.isatra.2022.06.003 · Cited by 28
Pirboudaghi, S., Tarinejad, R., & Alami, M. T. (2017) · Journal of Vibration and Control · doi:10.1177/1077546317722428 · Cited by 25
“Various identification techniques for the time-varying structures have been used in the literature including the Hilbert–Huang transform based approach (Huang and Lou, 2006; Osman and Wang, 2014), Stockwell transform (Stockwell et al., 1996), and wavelet transform (WT) (Carmona et al., 1998).”
MethodTouzout, W., Benazzouz, D., Gougam, F., Afia, A., & Rahmoune, C. (2014) · Advances in Mechanical Engineering · doi:10.1177/1687814020980569 · Cited by 22
Detection and Characterization of Bearing Faults from the Frequency Domain Features of Vibration
Arun, P., Lincon, S. A., & Prabhakaran, N. (2017) · IETE Journal of Research · doi:10.1080/03772063.2017.1369369 · Cited by 21
“Osman and Wang [22] developed a technique based on normalized Hilbert–Huang transform (NHHT) for analyzing nonstationarity of the vibration so as to predict the bearing faults.”
MethodAnalysis of Fault Detection in Rolling Element Bearings
Wang, W. (2021) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2021.9436098 · Cited by 19
“Although many techniques have been proposed in the literature for bearing fault detection [6], reliable fault diagnosis in bearings still remains a challenging task due to several reasons.”
BackgroundSelf-citationLu, H., Zhao, X., Tao, B., & Ding, H. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108480 · Cited by 22
Baokang, Y., Wang, B., Zhou, F., Li, W., & Xu, B. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.08.015 · Cited by 18
Machinery fault diagnosis based on time–frequency images and label consistent K-SVD
Yuan, H., Chen, J., & Dong, G. (2017) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406217704475 · Cited by 14
Wang, Z., Xu, X., Zhang, Y., Wang, Z., Li, Y., Liu, Z., & Zhang, Y. (2023) · Sensors · doi:10.3390/s23156730 · Cited by 12
“[26] proposed a new normalized Hilbert–Huang transform (NHHT) technique for the detection of bearing faults.”
MethodBaokang, Y., Wang, B., Zhou, F., Li, W., & Xu, B. (2019) · Journal of low frequency noise, vibration and active control · doi:10.1177/1461348418825406 · Cited by 8
“sðtÞ 1⁄4 Ae k 2 f2ðt uÞ2 2 cosð2pftþ uÞ (9) where A is the normalization coefficient and A 1⁄4 p (1)4k12f(1)2, k is the scale factor, u is the shift factor, u is the phase factor, and f is the frequency factor.”
BackgroundMethodQian, L., Liu, P., Lu, H., Shi, J., & Zhao, X. (2024) · Sensors · doi:10.3390/s24041095 · Cited by 6
“Such as time-domain-statistical parameters [13], fast Fourier transform analysis (FFT) [14], wavelet transform [15,16], Hilbert–Huang transform [17,18], variational mode decomposition (VMD) [19,20], sparse representation [21,22], etc. Qin et al. [23] proposed a chatter detection approach to…”
MethodAn Enhanced TK Technology for Bearing Fault Detection Using Vibration Measurement
Malusare, M., Mahmud, M., & Wang, W. (2025) · Sensors · doi:10.3390/s25216571 · Cited by 5
“As a result, selecting one or two IMFs may lead to less reliable fault detection and sometimes make it difficult to apply EMD to long, non-Sensors stationary signals [15].”
Self-citationPriyandoko, G., Istiadi, I., Siswanto, D., Effendi, D. U., & Naufal, E. R. (2020) · SINERGI · doi:10.22441/sinergi.2021.1.005 · Cited by 5
“To consider non-stationary behaviour effects in induction motors, various timefrequency analyses methods, such as Wavelet Transforms [1, 7, 10], Hilbert Huang transformations [11], empirical mode decomposition (EMD) and ensemble empirical mode decomposition method (EEMD) [12], are used.”
MethodXv, J., Liao, Z., Cao, Y., Cao, Y., Hou, D., & Huang, P. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad232d · Cited by 4
“For the MED method, one of the most important parameters, filter length, is usually realized by trial and error [9, 25, 33].”
InfluentialA New Hilbert-Huang Transform Technique for Fault Detection in Rolling Element Bearings
Osman, S., & Wang, W. (2019) · Springer eBooks · doi:10.1007/978-3-030-05645-2_7 · Cited by 4
Self-citationAn Analysis of the WPT Function for Pattern Optimization to Detect Defects in Bearings
Zamorano, M., García, M. J. G., & Castejón, C. (2024) · Machines · doi:10.3390/machines12030207 · Cited by 4
A Fast Sparse Decomposition Based on the Teager Energy Operator in Extraction of Weak Fault Signals
Baokang, Y., Li, Z., Zhou, F., Lv, X., & Zhou, F. (2022) · Sensors · doi:10.3390/s22207973 · Cited by 3
“Methods such as wavelet transform (WT), empirical mode decomposition (EMD), local mean decomposition (LMD), and ensemble local mean decomposition (ELMD) are obviously effective in extracting signals with local features and widely used in mechanical fault diagnosis [5,6].”
MethodAn Hilbert-Huang Spectrum Technique for Fault Detection in Rolling Element Bearings
Osman, S., & Wang, W. (2018) · International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC) · doi:10.1109/sdpc.2018.8664864 · Cited by 4
“Although these statistical parameters are easy to measure, they are rather sensitive to operating conditions in terms of loads and speed variations [8].”
BackgroundSelf-citationBearing Fault Detection Using Discrete Wavelet Transform and Partitioning Around Medoids Methods
Priyandoko, G., Siswanto, D., Istiadi, I., Effendi, D. U., & Naufal, E. R. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-33-4597-3_21 · Cited by 1
Fault diagnosis of bearings and gears using impulse-induced phase discontinuity
Chauhan, P., Shukla, S., & Singh, S. K. (2025) · Journal of Vibration and Control · doi:10.1177/10775463251378885 · Cited by 1
“The end effect associated with the EMD process interferes with the weak signal of the incipient stage fault (Osman and Wang, 2016).”
Integrated Hilbert Huang technique for bearing defects detection
Osman, S., & Wang, W. (2016) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2016.7542877 · Cited by 1
“, healthy bearings and bearings with defects on the outer races, inner races and rolling elements, respectively) utilizing equations for determining the defect characteristic frequencies [15,16].”
BackgroundMethodSelf-citationNovel Hilbert Huang transform techniques for bearing fault detection
Osman, S. (2013) · Knowledge Commons (Lakehead University)
Self-citationPrakash, G. (2017) · UWSpace (University of Waterloo)
New demodulation techniques for gearbox bearing fault detection
Osman, S. (2018)
Self-citationA Fault Identification Method Based on Multiresolution Generalized S-Transform
Baokang, Y., Zhang, Z., Zhou, F., & Ning, B. (2018) · Chinese Automation Congress · doi:10.1109/cac.2018.8623323
Metadata
- Authors
- Osman, S., & Wang, W.
- Affiliations
- Lakehead University (CA)
- Corresponding author
- Wang, Wilson
- ORCID
- Wang, Wilson
- Venue
- Journal of Vibration and Control
- Publisher
- SAGE Publications
- Published
- 2014-10-06
- Volume
- 22
- Issue
- 11
- Pages
- 2771-2787
- ISSN
- 1077-5463 (ISSN-L)
- 1741-2986
- OpenAlex
- W1989339181
- Cited by
- 31
- References
- 32
- Citations by year
- 2025: 2 · 2024: 3 · 2023: 1 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 3 · 2018: 4 · 2017: 4 · 2016: 2 · 2014: 1
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Vibration and Control (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- bearing fault detection, vibration signal denoising, intrinsic mode functions, feature extraction, non-stationary signals, rotating machinery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.