A normalized Hilbert-Huang transform technique for bearing fault detection
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
Bearings are commonly used in rotary machinery, whereas up to half of machinery malfunctions could be related to bearing defects. Unfortunately reliable fault detection systems still remain a challenging task, especially when bearing defect-related features are nonstationary. A new normalized Hilbert-Huang transform (NHHT) technique is proposed in this paper for vibration-based bearing fault detection. The NHHT for bearing fault detection takes two processes: firstly the vibration signal is denoised to highlight defect-related impulses; and secondly representative features are extracted for bearing fault detection. Vibration signal denoising is carried out by the use of the maximum kurtosis deconvolution filter to reduce impedance effect of transmission path of the measured vibration signal. A novel strategy based on D’Agostino-Person normality is suggested to enhance the distinctive intrinsic mode functions for representative features extraction and formulation for bearing fault detection. The effectiveness of the proposed NHHT technique is verified by a series of experimental tests corresponding to different bearing health conditions, and its robustness in bearing fault detection is examined by the use of data sets from a different experimental setup.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Osman and Wang [113] proposed a normalized HHT (NHHT) technique to tackle the problem of selecting the appropriate distinctive IMF components, especially for bearing health condition monitoring.However, the EMD of the proposed method only processes signals over narrowbands.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [113]
Citations
Cites
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816 · cited 1×
“If a defect occurs on the fixed ring race of a bearing, its corresponding signature can be characterized as stationary, which is relatively easy to analyze using classical data analysis techniques (e.g., statistical indicators) (Jardine et al., 2006).”
MethodA NEW VIEW OF NONLINEAR WATER WAVES: The Hilbert Spectrum
Huang, N. E., Shen, Z., & Long, S. R. (1999) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.31.1.417 · Cited by 2,098 · cited 1×
“In HHT analysis for bearing fault detection, a signal is firstly decomposed into a series of data sequences, called intrinsic mode functions (IMFs), and then bearing health condition is diagnosed by examining the resulting Hilbert spectrum (Huang et al., 2005; Huang et al., 1999).”
MethodA Suggestion for Using Powerful and Informative Tests of Normality
D'agostino, R. B., Belanger, A., & D'agostino, R. B. (1990) · The American Statistician · doi:10.2307/2684359 · Cited by 1,809
A Suggestion for Using Powerful and Informative Tests of Normality
D'agostino, R. B., Belanger, A., & D'agostino, R. B. (1990) · The American Statistician · doi:10.1080/00031305.1990.10475751 · Cited by 1,804 · cited 1×
“The DP test has been proven to be more robust than both skewness and kurtosis for normality testing (D’Agostino et al., 1990), and more powerful than the ShapiroWilk tests (Poitras, 2006).”
BackgroundQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 2×
“time) (Liu et al., 2008a; Qiu et al., 2006).”
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140 · cited 1×
“As a matter of fact, up to 50% of machinery defects are related to bearing faults (Bellini et al., 2008; Alberto et al., 2010).”
BackgroundWiggins, R. A. (1978) · Geoexploration · doi:10.1016/0016-7142(78)90005-4 · Cited by 960
Model for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931 · cited 1×
“But vibration-based analysis is the most commonly used approach due to its ease of measurement and relatively higher signal to noise ratio (Trajin et al., 2010; Tandon and Choudhury, 1997; McFadden and Smith, 1984), which will also be used in this work.”
MethodFEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879 · cited 2×
“The Morlet wavelet will be used in WT analysis (Liu et al, 2008b; Lin and Qu, 2000), which will be processed at a center frequency of 1,000Hz and with a band of 1,000Hz.”
BackgroundMethodSawalhi, N., Randall, R. B., & Endo, H. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.002 · Cited by 612 · cited 2×
“For example, Endo combined three data analysis processes: the MKD, autoregressive models and the WT for fault detection in gear systems (Endo and Randall, 2007) and bearings (Sawalhi et al., 2007).”
Method
Research works printed but not linked: 2
- Kaewkongka T, 2003, International Journal of COMADEM, 6, 41
- 10.1016/j.ymssp.2009.11.011 · DOI · Paper page
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“Osman and Wang [113] proposed a normalized HHT (NHHT) technique to tackle the problem of selecting the appropriate distinctive IMF components, especially for bearing health condition monitoring.”
MethodFeature Extraction for Data-Driven Remaining Useful Life Prediction of Rolling Bearings
Zhao, H., Liu, H., Jin, Y., Dang, X., & Deng, W. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3059500 · Cited by 196
“Hilbert transform (HT) can transform a real signal into a complex signal [39].”
BackgroundSun, Y., Li, S., Wang, Y., & Wang, X. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107817 · Cited by 156
A Morphological Hilbert-Huang Transform Technique for Bearing Fault Detection
Osman, S., & Wang, W. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2598019 · Cited by 93
“The authors have also proposed a normalized HHT [20] and an enhanced HHT [21] technique for bearing fault detection; although these methods can produce promising results in extracting bearing fault-related features under controlled operating conditions, they still require an approach to adaptively select and integrate…”
BackgroundMethodInfluentialSelf-citationStudy on a Novel Fault Diagnosis Method Based on VMD and BLM
Zheng, J., Yuan, Y. H., Zou, L., Deng, W., Guo, C., & Zhao, H. (2019) · Symmetry · doi:10.3390/sym11060747 · Cited by 38
“To effectively recognize the working state of rolling bearings, many signal processing methods have been proposed in recent years, such as short time Fourier transform (STFT) [14,15], wavelet transform (WT) [16], Hilbert–Huang transform (HHT) [17–19], empirical mode decomposition (EMD) [20–22], entropy [23–25], suppor…”
Method
Metadata
- Authors
- Osman, S., & Wang, W.
- Affiliations
- Lakehead University (CA)
- Corresponding author
- Wang, Wilson
- ORCID
- Wang, Wilson
- Venue
- Journal of Vibration and Control
- Publisher
- SAGE Publications
- Published
- 2014-10-06
- Volume
- 22
- Issue
- 11
- Pages
- 2771-2787
- ISSN
- 1077-5463 (ISSN-L)
- 1741-2986
- OpenAlex
- W1989339181
- Cited by
- 31
- References
- 32
- Citations by year
- 2025: 2 · 2024: 3 · 2023: 1 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 3 · 2018: 4 · 2017: 4 · 2016: 2 · 2014: 1
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Vibration and Control (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- bearing fault detection, vibration signal denoising, intrinsic mode functions, feature extraction, non-stationary signals, rotating machinery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.