The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Compressive sampling–based data loss recovery for wireless sensor networks used in civil structural health monitoring
Abstract
In a wireless sensor network, data loss often occurs during the data transmission between the wireless sensor nodes and the base station. In the wireless sensor network applications for civil structural health monitoring, the errors caused by data loss inevitably affect the data analysis of the structure and subsequent decision making. This article explores a novel application of compressive sampling to recover the lost data in a wireless sensor network used in structural health monitoring. The main idea in this approach is to first perform a linear projection of the transmitted data x onto y by a random matrix and subsequently to transmit the data y to the base station. The original data x are then reconstructed on the base station from the data y using the compressive sampling method. The acceleration time series collected by the field test on the Jinzhou West Bridge and the Structural Health Monitoring System on the National Aquatics Center in Beijing are employed to validate the accuracy of the proposed data loss recovery approach. The results indicate that good recovery accuracy can be obtained if the original data have a sparse characteristic in some orthonormal basis, whereas the recovery accuracy is degraded when the original data are not sparse in the orthonormal basis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction To Compressive Sampling
Candes, E. J., & Wakin, M. B. (2008) · IEEE Signal Processing Magazine · doi:10.1109/msp.2007.914731 · Cited by 10,017
Cited by
The State of the Art of Data Science and Engineering in Structural Health Monitoring
Bao, Y., Chen, Z., Wei, S., Xu, Y., Tang, Z., & Li, H. (2019) · Engineering · doi:10.1016/j.eng.2018.11.027 · Cited by 483
Self-citationAbdulkarem, M., Samsudin, K., Rokhani, F. Z., & A Rasid, M. F. (2020) · Structural Health Monitoring · doi:10.1177/1475921719854528 · Cited by 424
Deep learning for data anomaly detection and data compression of a long‐span suspension bridge
Ni, F., Zhang, J., & Noori, M. N. (2020) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12528 · Cited by 264
Structural damage detection based on l 1 regularization using natural frequencies and mode shapes
Hou, R., Xia, Y., & Zhou, X. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2107 · Cited by 127
L 1 regularization approach to structural damage detection using frequency data
Zhou, X.-Q., Xia, Y., & Weng, S. (2015) · Structural Health Monitoring · doi:10.1177/1475921715604386 · Cited by 99
Metadata
- Authors
- Bao, Y., Li, H., Sun, X., Yu, Y., & Ou, J.
- Venue
- Structural Health Monitoring
- Publisher
- SAGE Publications
- Published
- 2012-11-06
- Volume
- 12
- Issue
- 1
- Pages
- 78-95
- ISSN
- 1475-9217 (ISSN-L)
- 1741-3168
- OpenAlex
- W2137539855
- Cited by
- 188
- References
- 1
- FWCI
- 6.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compressive sampling–based data loss recovery for wireless sensor networks used in civil structural health monitoring. https://app.cochat.ai/papers/10.1177/1475921712462936
- The paper
- Bao, Y., Li, H., Sun, X., Yu, Y., & Ou, J. (2013). Compressive sampling–based data loss recovery for wireless sensor networks used in civil structural health monitoring. Structural Health Monitoring. https://doi.org/10.1177/1475921712462936
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.