The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Impact of Curing Protocol on Conversion and Shrinkage Stress
Abstract
Since considerable shrinkage stress develops during the curing of dental composites, various soft-start photocuring protocols, aiming to lower stress but not compromise conversion, have been proposed. We hypothesized that utilizing soft-start photocuring will result in not only reduced stress, but also decreased conversion. We evaluated the impact of 3 protocols (soft-start, pulse, and standard) on the stress development and polymerization extent of an experimental composite. A novel set-up capable of simultaneous shrinkage stress, conversion, and temperature measurements on the same specimen was utilized. Analysis of the data shows that stress rises dramatically as a function of conversion in the vitrified state, and the utilization of soft-start or pulse curing results in specimens with reduced final conversion and shrinkage stress, compared with specimens cured according to the standard full-intensity protocol. Finally, this study demonstrates that the predominant reason for the reduced shrinkage stress attained with soft-start or pulse curing is a modest decrease in final conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Cited by
Cheng, L., Weir, M. D., Xu, H. H. K., Antonucci, J. M., Kraigsley, A. M., Lin, N. J., Lin-Gibson, S., & Zhou, X. (2012) · Dental Materials · doi:10.1016/j.dental.2012.01.005 · Cited by 354
Nanocomposite containing amorphous calcium phosphate nanoparticles for caries inhibition
Xu, H. H. K., Moreau, J. L., Sun, L., & Chow, L. C. (2011) · Dental Materials · doi:10.1016/j.dental.2011.03.016 · Cited by 309
Light curing strategies for lithography-based additive manufacturing of customized ceramics
Mitteramskogler, G., Gmeiner, R., Felzmann, R., Gruber, S., Hofstetter, C., Stampfl, J., Ebert, J., Wachter, W., & Laubersheimer, J. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.003 · Cited by 263
Novel dental adhesives containing nanoparticles of silver and amorphous calcium phosphate
Melo, M. A. S., Cheng, L., Zhang, K., Weir, M. D., Rodrigues, L. K. A., & Xu, H. H. K. (2013) · Dental Materials · doi:10.1016/j.dental.2012.10.005 · Cited by 259
Kim, D., Shim, J.-S., Lee, D., Shin, S.-H., Nam, N.-E., Park, K.-H., Shim, J.-S., & Kim, J.-E. (2020) · Polymers · doi:10.3390/polym12112762 · Cited by 253
Metadata
- Authors
- Lu, H., Stansbury, J. W., & Bowman, C. N.
- Venue
- Journal of Dental Research
- Publisher
- SAGE Publications
- Published
- 2005-09
- Volume
- 84
- Issue
- 9
- Pages
- 822-826
- ISSN
- 0022-0345 (ISSN-L)
- 1544-0591
- OpenAlex
- W2068391276
- Cited by
- 191
- References
- 1
- FWCI
- 11.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Curing Protocol on Conversion and Shrinkage Stress. https://app.cochat.ai/papers/10.1177/154405910508400908
- The paper
- Lu, H., Stansbury, J. W., & Bowman, C. N. (2005). Impact of Curing Protocol on Conversion and Shrinkage Stress. Journal of Dental Research. https://doi.org/10.1177/154405910508400908
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.