Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber–reinforced plastic/titanium alloy stacks
Open accessThe DOI matches its Crossref record.
Abstract
An experimental study on drilling of carbon fiber–reinforced plastic/titanium alloy was conducted using three kinds of drills to investigate the cutting process. This research was mainly focused on the drilling forces, drilling temperatures, chips, and delamination area with respect to the cutting parameters and tool geometries. One type of tungsten carbide twist drill and two types of chemical vapor deposition diamond-coated drills which were multi-facet drill and brad spur drill, respectively, were used in this research. The influence of drilling parameters and tool geometries was analyzed and the conclusions were drawn that the proper selection of drilling parameters and drill geometries could lead to better hole quality. Experimental results indicated that the drilling forces and hole quality have a strong connection with feed rate while the impact of cutting speed is small. Research results also showed that the use of multi-facet drill could reduce the delamination greatly and thus produced a better surface integrity. Besides, drilling temperature and titanium alloy chips were studied in this research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Evaluating Hole Quality in Drilling of Al 6061 Alloys
Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G. M., & Prakash, C. (2018) · Materials · doi:10.3390/ma11122443 · Cited by 109
Jia, Z.-Y., Zhang, C., Wang, F.-J., Fu, R., & Chen, C. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111786 · Cited by 59
Kolesnyk, V., Peterka, J., Kuruc, M., Šimna, V., Moravčíková, J., Vopát, T., & Lisovenko, D. (2020) · Materials · doi:10.3390/ma13143232 · Cited by 44
Motorcu, A., & Ekici, E. (2022) · FME Transactions · doi:10.5937/fme2203441m · Cited by 12
“In the ARAS method, there is a row consisting of the optimal values of each criterion in the initial decision matrix [32-38].”
Method
Metadata
- Authors
- Wei, Y., An, Q., Ming, W., & Chen, M.
- Venue
- Advances in Mechanical Engineering
- Publisher
- SAGE Publications
- Published
- 2016-09
- Volume
- 8
- Issue
- 9
- ISSN
- 1687-8132 (ISSN-L)
- 1687-8140
- OpenAlex
- W2522163271
- Cited by
- 67
- References
- 0
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber–reinforced plastic/titanium alloy stacks. https://app.cochat.ai/papers/10.1177/1687814016670281
- The paper
- Wei, Y., An, Q., Ming, W., & Chen, M. (2016). Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber–reinforced plastic/titanium alloy stacks. Advances in Mechanical Engineering. https://doi.org/10.1177/1687814016670281
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.