The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Mechanical behaviour of laminated metal composites
Abstract
Laminated metal composites (LMCs) are a unique form of composite material in which alternating metal or metal containing layers are bonded together with discrete interfaces. The mechanical properties of these materials are reviewed. The tensile properties at low and high temperatures are described. At low temperature, very high tensile strengths can be achieved in deposition processed laminates and very high tensile ductilities can be achieved in roll bonded laminates by layer thickness refinement. At high temperature, superplasticity has been observed and agrees with predictions from constitutive creep relations. Damage critical properties (such as fracture toughness, fatigue, and impact behaviour) and damping can be superior to those exhibited by the component materials. The damage critical properties are strongly influenced by local delaminations at layer interfaces. Mechanisms responsible for many of the unique properties of LMCs have been proposed. The influence of processing, laminate architecture, and microstructure on these mechanisms and properties are described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deformation and Fracture Mechanics of Engineering Materials
Hertzberg, R. W., & Hauser, F. E. (1977) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443416 · Cited by 3,668
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
On the toughness of brittle materials reinforced with a ductile phase
Sigl, L. S., Mataga, P. A., Dalgleish, B. J., McMeeking, R. M., & Evans, A. G. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90149-6 · Cited by 422
Materials selection in mechanical design
Summerscales, J. (1993) · Composites Manufacturing · doi:10.1016/0956-7143(93)90102-e · Cited by 329
On crack extension in ductile/brittle laminates
Cao, H., & Evans, A. G. (1991) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(91)90032-v · Cited by 114
The deformation and fracture of constrained metal sheets
Bannister, M., & Ashby, M. F. (1991) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(91)90072-9 · Cited by 104
Maddin, R., Muhly, J. D., & Wheeler, T. S. (1977) · Scientific American · doi:10.1038/scientificamerican1077-122 · Cited by 68
Layer thickness effect on ductile tensile fracture of ultrahigh carbon steel-brass laminates
Syn, C. K., Lesuer, D. R., Wolfenstine, J., & SHERBY, O. D. (1993) · Metallurgical Transactions A · doi:10.1007/bf02646603 · Cited by 55
Self-citationFatigue crack growth and stress redistribution at interfaces
Shaw, M. C., Marshall, D. B., Dalgleish, B. J., Dadkhah, M. S., He, M. Y., & Evans, A. G. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90187-2 · Cited by 43
The processing and evaluation of clad metals
Forster, J. A., Jha, S., & Amatruda, A. (1993) · JOM · doi:10.1007/bf03223308 · Cited by 19
Cited by
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
Huang, L. J., Geng, L., & Peng, H.-X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.002 · Cited by 788
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
Tjong, S. C. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700106 · Cited by 619
Progress in cold roll bonding of metals
Li, L., Nagai, K., & Yin, F. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/2/023001 · Cited by 302
A novel biomimetic approach to the design of high-performance ceramic–metal composites
Launey, M. E., Munch, E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0331 · Cited by 294
Metadata
- Authors
- Lesuer, D. R., Syn, C. K., Sherby, O. D., Wadsworth, J., Lewandowski, J. J., & Hunt, W. H.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 1996-01-01
- Volume
- 41
- Issue
- 5
- Pages
- 169-197
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W1997594019
- Cited by
- 368
- References
- 10
- FWCI
- 1.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical behaviour of laminated metal composites. https://app.cochat.ai/papers/10.1179/095066096790151204
- The paper
- Lesuer, D. R., Syn, C. K., Sherby, O. D., Wadsworth, J., Lewandowski, J. J., & Hunt, W. H. (1996). Mechanical behaviour of laminated metal composites. International Materials Reviews. https://doi.org/10.1179/095066096790151204
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.