The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Progress in cold roll bonding of metals
Open accessAbstract
Layered composite materials have become an increasingly interesting topic in industrial development. Cold roll bonding (CRB), as a solid phase method of bonding same or different metals by rolling at room temperature, has been widely used in manufacturing large layered composite sheets and foils. In this paper, we provide a brief overview of a technology using layered composite materials produced by CRB and discuss the suitability of this technology in the fabrication of layered composite materials. The effects of process parameters on bonding, mainly including process and surface preparation conditions, have been analyzed. Bonding between two sheets can be realized when deformation reduction reaches a threshold value. However, it is essential to remove surface contamination layers to produce a satisfactory bond in CRB. It has been suggested that the degreasing and then scratch brushing of surfaces create a strong bonding between the layers. Bonding mechanisms, in which the film theory is expressed as the major mechanism in CRB, as well as bonding theoretical models, have also been reviewed. It has also been showed that it is easy for bcc structure metals to bond compared with fcc and hcp structure metals. In addition, hardness on bonding same metals plays an important part in CRB. Applications of composites produced by CRB in industrial fields are briefly reviewed and possible developments of CRB in the future are also described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saito, Y., Utsunomiya, H., Tsuji, N., & Sakai, T. (1999) · Acta Materialia · doi:10.1016/s1359-6454(98)00365-6 · Cited by 2,182
Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing
Tsuji, N., Ito, Y., Saito, Y., & Minamino, Y. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00282-8 · Cited by 1,182
Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process
Abbasi, M., Karimi Taheri, A., & Salehi, M. T. (2001) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(01)00872-6 · Cited by 433
Mechanical behaviour of laminated metal composites
Lesuer, D. R., Syn, C. K., Sherby, O. D., Wadsworth, J., Lewandowski, J. J., & Hunt, W. H. (1996) · International Materials Reviews · doi:10.1179/095066096790151204 · Cited by 368
Ohsaki, S., Kato, S., Tsuji, N., Ohkubo, T., & Hono, K. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.12.027 · Cited by 246
Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils
Luo, J.-G., & Acoff, V. L. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2004.01.021 · Cited by 215
Bond strength and formability of an aluminum-clad steel sheet
Manesh, H. D., & Taheri, A. K. (2003) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(03)00392-x · Cited by 174
The effect of annealing treatment on mechanical properties of aluminum clad steel sheet
Danesh Manesh, H., & Karimi Taheri, A. (2003) · Materials & Design · doi:10.1016/s0261-3069(03)00135-3 · Cited by 166
Chen, C.-Y., Chen, H.-L., & Hwang, W. (2006) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.47.1232 · Cited by 162
Vaidyanath, L. R., Nicholas, M., & MILNER, D. R. (1959) · Cited by 153
Cited by
Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications
Peng, P., Hu, A., Gerlich, A. P., Zou, G., Liu, L., & Zhou, Y. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02134 · Cited by 364
Cold roll bonding bond strengths: Review
Jamaati, R., & Toroghinejad, M. R. (2011) · Materials Science and Technology · doi:10.1179/026708310x12815992418256 · Cited by 171
Sridharan, N., Wolcott, P., Dapino, M., & Babu, S. S. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.02.013 · Cited by 108
Wang, Y., Song, R., Yanagimoto, J., & Li, H. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.132 · Cited by 59
Interface strengthening of a roll-bonded two-ply Al/Cu sheet by short annealing
Kim, M. J., Lee, K. S., Han, S. H., & Hong, S. I. (2021) · Materials Characterization · doi:10.1016/j.matchar.2021.111021 · Cited by 50
Metadata
- Authors
- Li, L., Nagai, K., & Yin, F.
- Venue
- Science and Technology of Advanced Materials
- Publisher
- Informa UK Limited
- Published
- 2008-04
- Volume
- 9
- Issue
- 2
- Pages
- 023001
- ISSN
- 1468-6996 (ISSN-L)
- 1878-5514
- OpenAlex
- W2054689923
- Cited by
- 302
- References
- 35
- FWCI
- 9.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress in cold roll bonding of metals. https://app.cochat.ai/papers/10.1088/1468-6996/9/2/023001
- The paper
- Li, L., Nagai, K., & Yin, F. (2008). Progress in cold roll bonding of metals. Science and Technology of Advanced Materials. https://doi.org/10.1088/1468-6996/9/2/023001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.