The DOI matches its OpenAlex record; 11 of the 11 references it cites were found in a registry or an index.
Modelling of hot deformation for microstructural control
Abstract
Bulk metal working processes are carried out at elevated temperatures where the occurrence of simultaneous softening processes would enable the imposition of large strains in a single step or multiple steps. Hot working also causes a significant change in the microstructure of the material and this contributes to one part of workability generally referred to intrinsic workability, which is sensitive to the initial conditions of the material and the process parameters. The other part, related to the state of stress existing in the deformation zone, is specific to a metal working process and may be controlled by changing the applied state of stress and/or the geometry of the deformation zone. An understanding of the constitutive behaviour of the material is essential for the optimisation of the intrinsic workability and control of microstructural evolution during hot working. In recent years, modelling techniques have been developed for this purpose and these are critically reviewed. These include: (1) the kinetic model, (2) the atomistic model, (3) the dynamic materials model, and (4) other models including activation energy maps with stability criteria and polar reciprocity model. Since the first two models do not lead to workability optimisation directly and are not useful for commercial alloys, the dynamic materials model has been developed. This model forms a bridge between the continuum mechanics and the microstructural mechanisms occurring during hot deformation, and consists of principles of irreversible thermodynamics of large plastic flow. The dissipated power is related to the rate of entropy production due to metallurgical processes obtained by partitioning the total power between that due to the temperature rise and the microstructural change. In view of the viscoplastic nature of hot deformation, the strain rate sensitivity of flow stress has been found to be the power partitioning factor. The development of processing maps using this model, their interpretation and application for optimising hot workability and control of microstructure are reviewed. The development of activation energy maps and their use in the control of microstructure are useful for obtaining robust process control for microstructural optimisation, while the use of the stability criteria puts undue restrictions on the processing regimes. Several mechanisms of hot deformation, with special reference to dynamic recrystallisation, are discussed in the light of results from processing maps obtained on a wide range of materials. Finally, the application of the processing maps in designing bulk metal working processes is briefly explained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Time, structure, and fluctuations
Prigogine, I. (1978) · Science · doi:10.1126/science.201.4358.777 · Cited by 1,148
Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations
Sakai, T., & Jonas, J. J. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90049-x · Cited by 1,020
Poliak, E. I., & Jonas, J. J. (1996) · Acta Materialia · doi:10.1016/1359-6454(95)00146-7 · Cited by 992
Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation
Luton, M. J., & Sellars, C. M. (1969) · Acta Metallurgica · doi:10.1016/0001-6160(69)90049-2 · Cited by 565
A nucleation criterion for dynamic recrystallization during hot working
Roberts, W. T., & Ahlblom, B. (1978) · Acta Metallurgica · doi:10.1016/0001-6160(78)90030-5 · Cited by 480
A model for hot working occurring by recrystallization
Sandström, R., & Lagneborg, R. (1975) · Acta Metallurgica · doi:10.1016/0001-6160(75)90132-7 · Cited by 291
Derby, B., & Ashby, M. F. (1987) · Scripta Metallurgica · doi:10.1016/0036-9748(87)90341-3 · Cited by 254
Prasad, Y. V. R. K., & Ravichandran, N. K. (1991) · Bulletin of Materials Science · doi:10.1007/bf02744618 · Cited by 122
Self-citationFactors affecting dynamic recrystallization of metals and alloys
Ueki, M., Horie, S., & Nakamura, T. (1987) · Materials Science and Technology · doi:10.1179/mst.1987.3.5.329 · Cited by 109
Factors affecting dynamic recrystallization of metals and alloys
Ueki, M., Horie, S., & NAKAMURA, T. (1987) · Materials Science and Technology · doi:10.1179/026708387790122585 · Cited by 109
Cited by
Soft magnetic FeCo alloys: alloy development, processing, and properties
Sundar, R. S., & Deevi, S. C. (2005) · International Materials Reviews · doi:10.1179/174328005x14339 · Cited by 427
Metadata
- Authors
- Prasad, Y. V. R. K., & Tamirisakandala, S.
- Venue
- International Materials Reviews
- Publisher
- Taylor & Francis
- Published
- 1998-01-01
- Volume
- 43
- Issue
- 6
- Pages
- 243-258
- ISSN
- 0950-6608 (ISSN-L)
- OpenAlex
- W2004113596
- Cited by
- 860
- References
- 11
- FWCI
- 12.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modelling of hot deformation for microstructural control. https://app.cochat.ai/papers/10.1179/095066098790105618
- The paper
- Prasad, Y. V. R. K., & Tamirisakandala, S. (1998). Modelling of hot deformation for microstructural control. International Materials Reviews. https://doi.org/10.1179/095066098790105618
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.