The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Soft magnetic FeCo alloys: alloy development, processing, and properties
Abstract
FeCo intermetallic alloys are well known to possess a unique combination of high saturation magnetisation, high Curie temperature, low magnetocrystalline anisotropy and good strength. They are ideally suited for applications requiring high flux densities. Intense research and development efforts over the years resulted in significant improvements in mechanical properties and better understanding of phase transformations in FeCo alloys. However, the high cost of the alloys has prevented their widespread applications. Emerging needs for soft magnetic materials to operate at high temperatures have caused renewed interest in FeCo alloys. The earlier studies are summarised in this review with special emphasis on phase transformations, processing, mechanical, magnetic and electrical properties of binary, ternary and more complex FeCo alloys. Current interest in developing nanocrystalline and thin films based on FeCo compositions is also summarised. The research areas that need to be addressed are also emphasised to clearly elucidate the effects of alloying additions and processing on the electrical and magnetic properties and on the high temperature mechanical properties of these alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New Fe-based soft magnetic alloys composed of ultrafine grain structure
Yoshizawa, Y., Oguma, S., & Yamauchi, K. (1988) · Journal of Applied Physics · doi:10.1063/1.342149 · Cited by 3,434
Magnetism and Magnetic Materials
Coey, J. M. D. (2001) · Cambridge University Press eBooks · doi:10.1017/9781108775052 · Cited by 3,178
Physical Metallurgy Principles
Reed-Hill, R. E. (1972) · Medical Entomology and Zoology · Cited by 2,148
Mechanik der plastischen Formänderung von Kristallen
Mises, R. V. (1928) · ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19280080302 · Cited by 1,528
Modelling of hot deformation for microstructural control
Prasad, Y. V. R. K., & Tamirisakandala, S. (1998) · International Materials Reviews · doi:10.1179/095066098790105618 · Cited by 860
Magnetism and Metallurgy of Soft Magnetic Materials
(1977) · Elsevier eBooks · doi:10.1016/b978-0-7204-0706-8.x5001-1 · Cited by 524
Nano-scale materials development for future magnetic applications
McHenry, M. E., & Laughlin, D. E. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00296-7 · Cited by 444
The effect of thermal agitaion on atomic arrangement in alloys—II
Bragg, W. L., & Williams, E. J. (1935) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1935.0165 · Cited by 238
Tailoring magnetic nanocrystal superlattices by chemical engineering
Sudfeld, D., Wojczykowski, K., Hachmann, W., JUTZI, P., Reiß, G., & Hütten, A. (2003) · Journal of Applied Physics · doi:10.1063/1.1558235 · Cited by 14
Cited by
Magnetic Nanostructures: Rational Design and Fabrication Strategies toward Diverse Applications
Wang, S., Xu, J., Li, W., Sun, S., Gao, S., & Hou, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00370 · Cited by 129
Magnetostriction of heavily deformed Fe–Co binary alloys prepared by forging and cold rolling
Yamaura, S.-I., Nakajima, T., Satoh, T., Ebata, T., & Furuya, Y. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.12.009 · Cited by 70
Metadata
- Authors
- Sundar, R. S., & Deevi, S. C.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2005-06
- Volume
- 50
- Issue
- 3
- Pages
- 157-192
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W2000181466
- Cited by
- 427
- References
- 9
- FWCI
- 4.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Soft magnetic FeCo alloys: alloy development, processing, and properties. https://app.cochat.ai/papers/10.1179/174328005x14339
- The paper
- Sundar, R. S., & Deevi, S. C. (2005). Soft magnetic FeCo alloys: alloy development, processing, and properties. International Materials Reviews. https://doi.org/10.1179/174328005x14339
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.