The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Texture development in friction stir welds
Abstract
The shear textures that develop in friction stir welds are reviewed and discussed. In all the materials examined, including face centred cubic (fcc), body centred cubic (bcc) and hexagonal close-packed (hcp) materials, friction stir welding produces a predominant shear texture with the close-packed directions aligned with the shear direction (SD) and the close-packed plane normal perpendicular to both the SD and the shear plane normal. This orientation corresponds to the B/ [Formula: see text] ideal shear texture in fcc materials, the D 1 ideal shear texture in bcc materials, and the P 1 ideal shear texture in hcp titanium alloys. Titanium friction stir welds fabricated above the β transus temperature can contain evidence of ideal shear texture components from both the bcc D 1 (after transformation to the hcp phase according to the Burgers orientation relationship) and the hcp P 1 shear textures. Thus, similar shear textures develop in friction stir welds of fcc, bcc and hcp materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Microstructural investigation of friction stir welded 7050-T651 aluminium
Su, J. Q., Nelson, T. W., Mishra, R. S., & Mahoney, M. W. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00449-4 · Cited by 1,096
Wenk, H.-R. (2002) · Reviews in Mineralogy and Geochemistry · doi:10.2138/gsrmg.51.1.291 · Cited by 931
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
McNelley, T. R., Swaminathan, S., & Su, J. Q. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.09.064 · Cited by 621
Lütjering, G., & Williams, J. C. (2003) · Engineering Materials and Processes · doi:10.1007/978-3-540-71398-2 · Cited by 528
Microstructure evolution during FSW/FSP of high strength aluminum alloys
Su, J.-Q., Nelson, T. W., & Sterling, C. J. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.06.009 · Cited by 523
Texture evolution in equal-channel angular extrusion
Beyerlein, I. J., & Tóth, L. S. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.01.001 · Cited by 503
Grain structure formation during friction stir welding observed by the ‘stop action technique’
Prangnell, P. B., & Heason, C. P. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.03.044 · Cited by 499
Development of grain structure during friction stir welding
FONDA, R. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.04.017 · Cited by 399
Self-citationAxial stresses and texture development during the torsion testing of Al, Cu and α-Fe
Montheillet, F., Cohen, M., & Jonas, J. J. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90187-1 · Cited by 358
Cited by
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Griffiths, R. J., Garcia, D., Song, J., Vasudevan, V. K., Steiner, M. A., Cai, W., & Yu, H. Z. (2021) · Materialia · doi:10.1016/j.mtla.2020.100967 · Cited by 236
Metadata
- Authors
- Fonda, R. W., & Knipling, K. E.
- Venue
- Science and Technology of Welding and Joining
- Publisher
- SAGE Publications
- Published
- 2011-05
- Volume
- 16
- Issue
- 4
- Pages
- 288-294
- ISSN
- 1362-1718 (ISSN-L)
- 1743-2936
- OpenAlex
- W2128248348
- Cited by
- 327
- References
- 21
- FWCI
- 15.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Texture development in friction stir welds. https://app.cochat.ai/papers/10.1179/1362171811y.0000000010
- The paper
- Fonda, R. W., & Knipling, K. E. (2011). Texture development in friction stir welds. Science and Technology of Welding and Joining. https://doi.org/10.1179/1362171811y.0000000010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.