The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Laser material processing
Abstract
Light amplification by stimulated emission of radiation (laser) is a coherent and monochromatic source of electromagnetic radiation that can propagate in a straight line with negligible divergence. As a result, laser finds diverse applications ranging from mere mundane to most sophisticated uses either for totally commercial or purely scientific purposes, and from life saving to life threatening causes. High power lasers can produce intense heating and perform various manufacturing operations or material processing. The present contribution provides an overview of the application of high power laser only for material processing in engineering applications, and intentionally excludes the scope of application of laser in metrology, biomedical technology, spectroscopy, etc. The manufacturing processes covered have been broadly divided into four major categories, namely, laser assisted forming, joining, machining and surface engineering. Besides discussing the scope and principle of these processes, each section enumerates a detailed update of literature, scientific issues and technological innovations. At the beginning, a brief introduction to different types of lasers and their general applications, fundamentals of laser–matter interaction and classification of laser material processing has been provided. The entire discussion primarily focuses on correlating the properties with processing parameters and microstructure and composition of the material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stimulated Optical Radiation in Ruby
MAIMAN, T. H. (1960) · Nature · doi:10.1038/187493a0 · Cited by 5,121
Physical study of laser-produced plasma in confined geometry
Fabbro, R., Fournier, J., Ballard, P., Devaux, D., & Virmont, J. (1990) · Journal of Applied Physics · doi:10.1063/1.346783 · Cited by 1,524
Physical processes in fusion welding
DebRoy, T., & David, S. A. (1995) · Reviews of Modern Physics · doi:10.1103/revmodphys.67.85 · Cited by 626
Steen, W. M. (2003) · Springer eBooks · doi:10.1007/978-1-4471-3752-8 · Cited by 581
Metallic foams: their production, properties and applications
Davies, G. J., & Zhen, S. (1983) · Journal of Materials Science · doi:10.1007/bf00554981 · Cited by 561
Schubert, E., Klassen, M., Zerner, I., Walz, C., & Sepold, G. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00756-7 · Cited by 536
Ultrashort-pulse laser machining of dielectric materials
Perry, M. D., Stuart, B. C., Banks, P. S., Feit, M. D., Yanovsky, V., & Rubenchik, A. M. (1999) · Journal of Applied Physics · doi:10.1063/1.370197 · Cited by 503
Machining of sub-micron holes using a femtosecond laser at 800 nm
Pronko, P. P., Dutta, S. K., Squier, J., Rudd, J. V., Du, D., & Mourou, G. (1995) · Optics Communications · doi:10.1016/0030-4018(94)00585-i · Cited by 487
Mai, T. A., & Spowage, A. C. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2004.02.025 · Cited by 385
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping
Liu, W., & DuPont, J. N. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00020-4 · Cited by 379
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Laser-assisted machining of Inconel 718 with an economic analysis
Anderson, M., Patwa, R., & Shin, Y. C. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.11.005 · Cited by 353
Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy
Majumdar, J. D., Galun, R., Mordike, B. L., et al. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00519-7 · Cited by 331
Understanding thermal behavior in the LENS process
Griffith, M. L., Schlienger, M. E., Harwell, L. D., Oliver, M. S., Baldwin, M. D., Ensz, M. T., Essien, M., Brooks, J., Robino, C. V., Smugeresky, J. E., et al. (1999) · Materials & Design · doi:10.1016/s0261-3069(99)00016-3 · Cited by 327
Laser welding of dissimilar metal combinations
Sun, Z., & Ion, J. C. (1995) · Journal of Materials Science · doi:10.1007/bf00361499 · Cited by 291
Haboudou, A., Peyre, P., Vannes, A. B., & Peix, G. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00637-3 · Cited by 272
Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts
Khaing, M. W., Fuh, J. Y. H., & Lü, L. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00584-2 · Cited by 261
Laser Rapid Prototyping of Photonic Band-Gap Microstructures
Wanke, M. C., Lehmann, O., Müller, K., Wen, Q., & Stuke, M. (1997) · Science · doi:10.1126/science.275.5304.1284 · Cited by 251
Shoji, S., & Kawata, S. (2000) · Applied Physics Letters · doi:10.1063/1.126438 · Cited by 228
Steel to aluminium key-hole laser welding
Sierra, G., Peyre, P., Deschaux-Beaume, F., Stuart, D., & Fras, G. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.10.106 · Cited by 188
Chu, J. P., Rigsbee, J. M., Banaś, G., & Elsayed-Ali, H. E. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)00889-2 · Cited by 172
Precision glass machining, drilling and profile cutting by short pulse lasers
Nikumb, S., Chen, Q., Li, C., Reshef, H., Zheng, H. Y., Qiu, H., & Low, D. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2004.08.136 · Cited by 171
The microstructure of rapidly solidified AlFe alloys subjected to laser surface treatment
Gremaud, M., Carrard, M., & Kurz, W. (1990) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(90)90271-h · Cited by 169
Weld metal microstructural characteristics in pulsed Nd: YAG laser welding
Malekghaini, F., Hamedi, M. J., Torkamany, M. J., & Sabbaghzadeh, J. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.02.019 · Cited by 147
Mold fabrication and modification using hybrid processes of selective laser cladding and milling
Jeng, J., & Lin, M.-C. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00850-5 · Cited by 136
Hybrid laser–TIG welding, laser beam welding and gas tungsten arc welding of AZ31B magnesium alloy
Liming, L., Ji-feng, W., & Gang, S. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.04.044 · Cited by 134
Micromachining with ultrashort laser pulses: from basic understanding to technical applications
Dausinger, F. H., Hügel, H., & Конов, В. И. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.537496 · Cited by 130
Laser-based method for fabricating monodisperse metallic nanoparticles
Bosbach, J., Martin, D., Stietz, F., Wenzel, T., & Trager, F. N. (1999) · Applied Physics Letters · doi:10.1063/1.123911 · Cited by 121
Qi, X., & Song, G. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.043 · Cited by 106
In situ formation of TiC composite using selective laser melting
Lü, L., Fuh, J. Y. H., Chen, Z. D., Leong, C., & Wong, Y. S. (2000) · Materials Research Bulletin · doi:10.1016/s0025-5408(00)00339-1 · Cited by 105
Choi, D., Lee, S. H., Shin, B. S., et al. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00652-5 · Cited by 98
The effects of process parameters on spatter deposition in laser percussion drilling
Low, D. K. Y., Li, L., & Byrd, P. J. (2000) · Optics & Laser Technology · doi:10.1016/s0030-3992(00)00079-7 · Cited by 85
Experimental study of drilling sub-10 μm holes in thin metal foils with femtosecond laser pulses
Zhu, X. L., Villeneuve, D. M., Naumov, A. Y., Nikumb, S. K., & Corkum, P. B. (1999) · Applied Surface Science · doi:10.1016/s0169-4332(99)00331-1 · Cited by 82
Effects of laser operating parameters on metals micromachining with ultrafast lasers
Cheng, J. P., Perrie, W., Edwardson, S. P., Fearon, E., Dearden, G., & Watkins, K. G. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.09.013 · Cited by 78
Lasing in femtosecond laser written optical waveguides
Osellame, R., Valle, G. D., Chiodo, N., Taccheo, S., Laporta, P., Svelto, O., & Cerullo, G. (2008) · Applied Physics A · doi:10.1007/s00339-008-4644-6 · Cited by 65
The extent of laser-induced thermal damage of UD and crossply composite laminates
Uhlmann, E., Spur, G., Hocheng, H., et al. (1999) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(98)00045-5 · Cited by 56
Laser coloration and bleaching of amorphous WO3 thin film
Lu, Y., & Qiu, H. (2000) · Journal of Applied Physics · doi:10.1063/1.373780 · Cited by 55
Laser surface treatment and corrosion behaviour of martensitic stainless AISI 420 steel
Escudero, M. L., & Belló, J. M. (1992) · Materials Science and Engineering A · doi:10.1016/0921-5093(92)90012-p · Cited by 50
Issues in fabricating manufacturing tooling using powder-based additive freeform fabrication
Paul, B. K., & Baskaran, S. (1996) · Journal of Materials Processing Technology · doi:10.1016/0924-0136(96)02482-x · Cited by 49
Chu, J. P., Rigsbee, J. M., Banaś, G., Lawrence, F. V., & Elsayed-Ali, H. E. (1995) · Metallurgical and Materials Transactions A · doi:10.1007/bf02647602 · Cited by 46
Direct laser fabrication of superalloy cermet abrasive turbine blade tips
Das, S., Fuesting, T. P., Danyo, G., Brown, L. E., Beaman, J. J., & Bourell, D. L. (2000) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(99)00057-6 · Cited by 42
Verdier, M., Costil, S., Coddet, C., et al. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01079-6 · Cited by 39
Excimer laser machining and metallization of vias in aluminum nitride
Lumpp, J. K., & Allen, S. D. (1997) · IEEE Transactions on Components Packaging and Manufacturing Technology Part B · doi:10.1109/96.618223 · Cited by 27
Laser rapid prototyping in nonlinear medium
Daneshvar, K., Raissi, M., & Bobbio, S. M. (2000) · Journal of Applied Physics · doi:10.1063/1.1288503 · Cited by 22
Pillai, S. R., Shankar, P., Rao, R. V. S., Bharasi, N. S., & Kumaravel, S. (2001) · Materials Science and Technology · doi:10.1179/026708301101509151 · Cited by 11
Thermal oxidation-resistant surface alloys processed by laser alloying on 35 NCD 16 ferritic steel
Gemelli, E., Galerie, A., & CAILLET, M. (1996) · Journal of Materials Science · doi:10.1007/bf00356271 · Cited by 8
Hollow glass waveguides and silver halide fibers as scanning elements for CO2 laser marking systems
Dekel, B. Z., Inberg, A., Croitoru, N. I., Shalem, S., & Katzir, A. (2000) · Optical Engineering · doi:10.1117/1.602475 · Cited by 6
Surface modification of a polymer film by cryogenic laser ablation of organosilicon compounds
Dřı́nek, V., Niino, H., Pola, J., & Yabe, A. (2001) · Applied Physics A · doi:10.1007/s003390100925 · Cited by 6
Cited by
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
AlMangour, B., Grzesiak, D., & Jenn-MingYang (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.018 · Cited by 321
Basics of laser powder bed fusion
Yadroitsev, I., Yadroitsava, I., & Du Plessis, A. (2021) · Fundamentals of Laser Powder Bed Fusion of Metals · doi:10.1016/b978-0-12-824090-8.00024-x · Cited by 183
Caprio, L., Demir, A. G., Previtali, B., & Colosimo, B. M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.101029 · Cited by 85
Metadata
- Authors
- Dutta Majumdar, J., & Manna, I.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2011-11
- Volume
- 56
- Issue
- 5-6
- Pages
- 341-388
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W4211113410
- Cited by
- 595
- References
- 48
- FWCI
- 23.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.