The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Inkjet printing biomaterials for tissue engineering: bioprinting
Abstract
Inkjet printing offers controlled placement of both biological and synthetic materials. The precision, control and small working volumes associated with inkjet printing are advantageous where biological materials such as proteins, enzymes and cells can incur high costs. This review is primarily technology focused and divides bioprinting into three categories of interest: proteins, cells and scaffolds and demonstrates that the logistical hurdles and material formulation requirements remain a common denominator to the advancement of the field into commercial applications and three-dimensional (3-D) constructs. A variety of cell types printed using thermal, piezoelectric and electrostatic actuation mechanisms yield 80–95% cell viability. Transient membrane damage is reported for cells printed using a thermal printer. Protein deposition by thermal and piezoelectric printing results in reversible deformation leading to an increased need for the addition of ink modifiers. The fluid characteristics and the drop substrate interactions are identified as crucial with regards to future applications. The current approaches to scaffold matrix selection with regards to the complex criterion require fluid and solid phases and a controlled phase change while maintaining the criterion for printing vary from chemical gelation, physical gelation mechanisms (e.g. thermo reversible gels) and tandem gelation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Self-citationAlginate as immobilization matrix for cells
SMIDSROD, O., & SKJAKBRK, G. (1990) · Trends in Biotechnology · doi:10.1016/0167-7799(90)90139-o · Cited by 1,937
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 1,152
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Self-citationInkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Inkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Cited by
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Metadata
- Authors
- Saunders, R. E., & Derby, B.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2014-07-21
- Volume
- 59
- Issue
- 8
- Pages
- 430-448
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W2048071051
- Cited by
- 365
- References
- 55
- FWCI
- 7.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Inkjet printing biomaterials for tissue engineering: bioprinting. https://app.cochat.ai/papers/10.1179/1743280414y.0000000040
- The paper
- Saunders, R. E., & Derby, B. (2014). Inkjet printing biomaterials for tissue engineering: bioprinting. International Materials Reviews. https://doi.org/10.1179/1743280414y.0000000040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.