Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 533

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Review of tools for friction stir welding and processing

Zhang, Y N, Cao, X, Larose, S, Wanjara, P · 2012 · Canadian Metallurgical Quarterly

Abstract

Friction stir welding (FSW) is a novel green manufacturing technique due to its energy efficiency and environmental friendliness. This solid state joining process involves a rotating tool consisting of a shoulder and/or a probe. The shoulder applies a downward pressure to the workpiece surface, constrains the plasticised material around the probe, generates heat through the friction and causes plastic deformation in a relatively thin layer under the bottom surface of the shoulder. The rotating probe mainly drags along, plasticises, and mixes the adjacent material in the stir zone, creating a joint without fusion. Friction stir processing (FSP), a variant of FSW, has been developed to manufacture composites, locally eliminate casting defects, refine microstructure and/or improve the associated mechanical and physical properties including strength, ductility, fatigue, creep, formability and corrosion resistance. However, major challenges such as tool design and wear currently limit the use of FSW/P for manufacturing applications, particularly for high melting temperature or high strength alloys. In this review, the FSW/P tools are briefly summarised in terms of the tool types, shapes, dimensions, materials and wear behaviours.Le soudage par friction-malaxage (SFM) est une technique nouvelle de fabrication verte grâce à son efficacité énergétique et à son amicalité environnementale. Ce procédé d’assemblage à l’état solide implique un outil de rotation constitué d’une épaulement et/ou d'un pion. L’épaulement applique une pression vers le bas sur la surface de la pièce de travail, contraint le matériel plastifié autour du pion, engendre de la chaleur au moyen de la friction, et conduit à la déformation plastique dans une couche relativement mince sous la surface du bas de l’épaulement. Principalement, le pion en rotation entraîne, plastifie et mélange le matériel adjacent dans la zone de mélange, créant une jonction sans fusion. Le traitement par friction-malaxage (TFM), une variante du SFM, a été développé pour fabriquer des composites, pour éliminer localement les défauts de moulage, pour raffiner la microstructure et/ou pour améliorer les propriétés mécaniques et physiques associées, incluant la résistance, la ductilité, la fatigue, le fluage, la formabilité et la résistance à la corrosion. Cependant, des défis majeurs comme le concept de l’outil et l’usure limitent présentement l’utilisation de S/TFM dans les applications de fabrication, particulièrement pour les alliages à haute température de fusion ou à haute résistance mécanique. Dans cet examen, on résume brièvement les outils de S/TFM par rapport aux types d’outils, à leurs formes, à leurs dimensions, aux matériaux et aux comportements d’usure.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1179/1879139512y.0000000015

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Cited by

See all 533

Metadata

Authors
Zhang, Y. N., Cao, X., Larose, S., & Wanjara, P.
Venue
Canadian Metallurgical Quarterly
Published
2012-07
Volume
51
Issue
3
Pages
250-261
ISSN
  • 0008-4433 (ISSN-L)
  • 1879-1395
OpenAlex
W2076108982
Cited by
533
References
7
FWCI
17.64
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Review of tools for friction stir welding and processing. https://app.cochat.ai/papers/10.1179/1879139512y.0000000015
The paper
Zhang, Y. N., Cao, X., Larose, S., & Wanjara, P. (2012). Review of tools for friction stir welding and processing. Canadian Metallurgical Quarterly. https://doi.org/10.1179/1879139512y.0000000015

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.