Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 426

The DOI matches its Crossref record.

Nomenclature of the hydrotalcite supergroup: natural layered double hydroxides

Open access
Mills, S. J., Christy, A. G., Génin, J.-M. R., Kameda, T., Colombo, F.·2012·Mineralogical Magazine

Abstract

Layered double hydroxide (LDH) compounds are characterized by structures in which layers with a brucite-like structure carry a net positive charge, usually due to the partial substitution of trivalent octahedrally coordinated cations for divalent cations, giving a general layer formula [(M1–x2+M3+x)(OH)2]x+. This positive charge is balanced by anions which are intercalated between the layers. Intercalated molecular water typically provides hydrogen bonding between the brucite layers. In addition to synthetic compounds, some of which have significant industrial applications, more than 40 mineral species conform to this description. Hydrotalcite, Mg 6 Al 2(OH)16[CO 3]·4H 2 O, as the longest-known example, is the archetype of this supergroup of minerals. We review the history, chemistry, crystal structure, polytypic variation and status of all hydrotalcite-supergroup species reported to date. The dominant divalent cations,M2+, that have been reported in hydrotalcite supergroup minerals are Mg, Ca, Mn, Fe, Ni, Cu and Zn; the dominant trivalent cations,M3+, are Al, Mn, Fe, Co and Ni. The most common intercalated anions are (CO3)2–, (SO 4)2–and Cl–; and OH–, S 2–and [Sb(OH)6]– have also been reported. Some species contain intercalated cationic or neutral complexes such as [Na(H 2 O)6]+or [MgSO4]0. We define eight groups within the supergroup on the basis of a combination of criteria. These are (1) the hydrotalcite group, with M2+:M3+= 3:1 (layer spacing ∼7.8 Å); (2) the quintinite group, with M2+:M3+= 2:1 (layer spacing ∼7.8 Å); (3) the fougèrite group, with M2+= Fe 2+,M3+= Fe 3+in a range of ratios, and with O2– replacing OH– in the brucite module to maintain charge balance (layer spacing ∼7.8 Å); (4) the woodwardite group, with variable M2+:M3+and interlayer [SO4]2 –, leading to an expanded layer spacing of ∼8.9 Å; (5) the cualstibite group, with interlayer [Sb(OH)6]– and a layer spacing of ∼9.7 Å; (6) the glaucocerinite group, with interlayer [SO4]2– as in the woodwardite group, and with additional interlayer H2O molecules that further expand the layer spacing to ∼11 Å; (7) the wermlandite group, with a layer spacing of ∼11 Å, in which cationic complexes occur with anions between the brucite-like layers; and (8) the hydrocalumite group, with M2+= Ca 2+and M3+= Al, which contains brucite-like layers in which the Ca:Al ratio is 2:1 and the large cation, Ca 2+, is coordinated to a seventh ligand of 'interlayer' water. The principal mineral status changes are as follows. (1) The names manasseite, sjögrenite and barbertonite are discredited; these minerals are the 2H polytypes of hydrotalcite, pyroaurite and stichtite, respectively. Cyanophyllite is discredited as it is the 1M polytype of cualstibite. (2) The mineral formerly described as fougèrite has been found to be an intimate intergrowth of two phases with distinct Fe 2+:Fe 3+ratios. The phase with Fe 2+:Fe 3+= 2:1 retains the name fougèrite; that with Fe 2+:Fe 3+= 1:2 is defined as the new species trébeurdenite. (3) The new minerals omsite (IMA2012-025), Ni2Fe 3+(OH)6[Sb(OH)6], and mössbauerite (IMA2012-049), Fe 3+6O 4(OH)8[CO3]·3H 2 O, which are both in the hydrotalcite supergroup are included in the discussion. (4) Jamborite, carrboydite, zincaluminite, motukoreaite, natroglaucocerinite, brugnatellite and muskoxite are identified as questionable species which need further investigation in order to verify their structure and composition. (5) The ranges of compositions currently ascribed to motukoreaite and muskoxite may each represent more than one species. The same applies to the approved species hydrowoodwardite and hydrocalumite. (6) Several unnamed minerals have been reported which are likely to represent additional species within the supergroup. This report has been approved by the Commission on New Minerals, Nomenclature and Classification (CNMNC) of the International Mineralogical Association, voting proposal 12-B. We also propose a compact notation for identifying synthetic LDH phases, for use by chemists as a preferred alternative to the current widespread misuse of mineral names.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1180/minmag.2012.076.5.10

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Metadata

Authors
Mills, S. J., Christy, A. G., Génin, J.-M. R., Kameda, T., & Colombo, F.
Venue
Mineralogical Magazine
Published
2012-10
Volume
76
Issue
5
Pages
1289-1336
ISSN
  • 0026-461X (ISSN-L)
  • 1471-8022
OpenAlex
W2003132996
Cited by
426
References
0
FWCI
9.27
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Nomenclature of the hydrotalcite supergroup: natural layered double hydroxides. https://app.cochat.ai/papers/10.1180/minmag.2012.076.5.10
The paper
Mills, S. J., Christy, A. G., Génin, J.-M. R., Kameda, T., & Colombo, F. (2012). Nomenclature of the hydrotalcite supergroup: natural layered double hydroxides. Mineralogical Magazine. https://doi.org/10.1180/minmag.2012.076.5.10

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.