The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A novel mesh processing based technique for 3D plant analysis
Open accessAbstract
BACKGROUND: In recent years, imaging based, automated, non-invasive, and non-destructive high-throughput plant phenotyping platforms have become popular tools for plant biology, underpinning the field of plant phenomics. Such platforms acquire and record large amounts of raw data that must be accurately and robustly calibrated, reconstructed, and analysed, requiring the development of sophisticated image understanding and quantification algorithms. The raw data can be processed in different ways, and the past few years have seen the emergence of two main approaches: 2D image processing and 3D mesh processing algorithms. Direct image quantification methods (usually 2D) dominate the current literature due to comparative simplicity. However, 3D mesh analysis provides the tremendous potential to accurately estimate specific morphological features cross-sectionally and monitor them over-time. RESULT: In this paper, we present a novel 3D mesh based technique developed for temporal high-throughput plant phenomics and perform initial tests for the analysis of Gossypium hirsutum vegetative growth. Based on plant meshes previously reconstructed from multi-view images, the methodology involves several stages, including morphological mesh segmentation, phenotypic parameters estimation, and plant organs tracking over time. The initial study focuses on presenting and validating the accuracy of the methodology on dicotyledons such as cotton but we believe the approach will be more broadly applicable. This study involved applying our technique to a set of six Gossypium hirsutum (cotton) plants studied over four time-points. Manual measurements, performed for each plant at every time-point, were used to assess the accuracy of our pipeline and quantify the error on the morphological parameters estimated. CONCLUSION: By directly comparing our automated mesh based quantitative data with manual measurements of individual stem height, leaf width and leaf length, we obtained the mean absolute errors of 9.34%, 5.75%, 8.78%, and correlation coefficients 0.88, 0.96, and 0.95 respectively. The temporal matching of leaves was accurate in 95% of the cases and the average execution time required to analyse a plant over four time-points was 4.9 minutes. The mesh processing based methodology is thus considered suitable for quantitative 4D monitoring of plant phenotypic features.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Intraclass correlations: Uses in assessing rater reliability.
Shrout, P. E., & Fleiss, J. L. (1979) · Psychological Bulletin · doi:10.1037/0033-2909.86.2.420 · Cited by 24,532
The Hungarian method for the assignment problem
Kuhn, H. W. (1955) · Naval Research Logistics Quarterly · doi:10.1002/nav.3800020109 · Cited by 13,120
Cited by
A Review of Imaging Techniques for Plant Phenotyping
Li, L., Zhang, Q., & Huang, D. (2014) · Sensors · doi:10.3390/s141120078 · Cited by 1,094
Future Scenarios for Plant Phenotyping
Fiorani, F., & Schurr, U. (2013) · Annual Review of Plant Biology · doi:10.1146/annurev-arplant-050312-120137 · Cited by 995
Chen, D., Neumann, K., Friedel, S., Kilian, B., Chen, M., Altmann, T., & Klukas, C. (2015) · The Plant Cell · doi:10.1105/tpc.114.129601 · Cited by 402
A review of computer vision technologies for plant phenotyping
Li, Z., Guo, R., Li, M., Chen, Y., & Li, G. (2020) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2020.105672 · Cited by 391
Proximal Remote Sensing Buggies and Potential Applications for Field-Based Phenotyping
Deery, D., Jimenez-Berni, J., Jones, H., Sirault, X., & Furbank, R. (2014) · Agronomy · doi:10.3390/agronomy4030349 · Cited by 384
Self-citation
Metadata
- Authors
- Paproki, A., Sirault, X., Berry, S., Furbank, R., & Fripp, J.
- Venue
- BMC Plant Biology
- Published
- 2012
- Volume
- 12
- Issue
- 1
- Pages
- 63
- ISSN
- 1471-2229 (ISSN-L)
- OpenAlex
- W2069615085
- Cited by
- 234
- References
- 2
- FWCI
- 15.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A novel mesh processing based technique for 3D plant analysis. https://app.cochat.ai/papers/10.1186/1471-2229-12-63
- The paper
- Paproki, A., Sirault, X., Berry, S., Furbank, R., & Fripp, J. (2012). A novel mesh processing based technique for 3D plant analysis. BMC Plant Biology. https://doi.org/10.1186/1471-2229-12-63
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.