Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index; none of the 7 sources its claims cite is checked for support yet.

Extraction of user's navigation commands from upper body force interaction in walker assisted gait

Open access
Frizera Neto, Anselmo, Gallego, Juan A, Rocon, Eduardo, Pons, José L, Ceres, Ramón · 2010 · BioMedical Engineering OnLine

Abstract

BACKGROUND: The advances in technology make possible the incorporation of sensors and actuators in rollators, building safer robots and extending the use of walkers to a more diverse population. This paper presents a new method for the extraction of navigation related components from upper-body force interaction data in walker assisted gait. A filtering architecture is designed to cancel: (i) the high-frequency noise caused by vibrations on the walker's structure due to irregularities on the terrain or walker's wheels and (ii) the cadence related force components caused by user's trunk oscillations during gait. As a result, a third component related to user's navigation commands is distinguished. RESULTS: For the cancelation of high-frequency noise, a Benedict-Bordner g-h filter was designed presenting very low values for Kinematic Tracking Error ((2.035 +/- 0.358).10(-2) kgf) and delay ((1.897 +/- 0.3697).10(1)ms). A Fourier Linear Combiner filtering architecture was implemented for the adaptive attenuation of about 80% of the cadence related components' energy from force data. This was done without compromising the information contained in the frequencies close to such notch filters. CONCLUSIONS: The presented methodology offers an effective cancelation of the undesired components from force data, allowing the system to extract in real-time voluntary user's navigation commands. Based on this real-time identification of voluntary user's commands, a classical approach to the control architecture of the robotic walker is being developed, in order to obtain stable and safe user assisted locomotion.

Overview

CoChat Summary

## TL;DR

The paper presents a real-time two-stage filtering method to separate voluntary navigation commands from upper-body force signals in a robotic walker, by removing vibration noise and gait-cadence components. In experiments with 5 healthy subjects and 30 walking trials, the method achieved about 80% attenuation of cadence-related energy while preserving nearby frequency information.

## Key findings

  • A Benedict-Bordner g-h filter for high-frequency noise cancellation produced very low Kinematic Tracking Error of (2.035 ± 0.358)·10^-2 kgf and delay of (1.897 ± 0.3697)·10^1 ms.
  • The Fourier Linear Combiner filtering architecture attenuated about 80% of the cadence-related force-signal energy, without compromising information in frequencies close to the notch filters.
  • Using mean coefficients across users/sensors/repetitions, the paper reports BBF performance of mean KTE (2.035 ± 0.358)·10^-2 kgf and delay (1.897 ± 0.3697)·10^1 ms, versus CDF mean KTE (1.951 ± 0.350)·10^-1 kgf and delay (2.413 ± 0.131)·10^1 ms.
  • In the validation experiments, 5 healthy subjects completed 30 repetitions on a 40 m indoor track with a 90° curve, and the authors report the methodology worked robustly across subjects with small standard deviations.

## Methods

  • The study is a method-development and validation paper for a robotic walker from the Simbiosis Project, using 3D force sensors under the forearm supports to capture upper-body force interaction during gait.
  • Validation used 5 healthy subjects, walking at preferred speed on a 40 m indoor track with a turn; force data were recorded at 1 kHz, with 30 total trials.
  • The analysis used a two-stage filtering architecture: a Benedict-Bordner g-h filter to cancel vibration-related high-frequency noise, followed by a Fourier Linear Combiner / WFLC-FLC approach to estimate and subtract cadence-related components; filter tuning relied on KTE and delay.

## Limitations

  • The paper states that the experiments were done with healthy subjects only; individuals with pathological gait will be addressed in the future.
  • The final clinical validation is not yet complete; the text says the device will later be taken to a clinical environment for final validation.
  • Evident from the text: the study validates filtering on a controlled indoor track and does not yet report real-world deployment outcomes or downstream navigation-command classification performance.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1186/1475-925x-9-37

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Illustration of the SIMBIOSIS walker upper body force interaction subsystem.
Figure 1 Illustration of the SIMBIOSIS walker upper body force interaction subsystem.CC BY · PubMed Central
Figure 2 Typical raw force data obtained from the Y-axis of the 3D sensor. Two main zones highlighted: (i) the yellow zone indicates the moments in which the subject has his arms resting on the structure of the walker and is not walking, and (ii) denotes the moments in which the subject is actually walking with the device. Three main components are identified in force signals: the vibrations introduced by floor/walker wheels imperfections, oscillations due to user's trunk motion during gait and the voluntary transient events related to the user's navigational commands.
Figure 2 Typical raw force data obtained from the Y-axis of the 3D sensor. Two main zones highlighted: (i) the yellow zone indicates the moments in which the subject has his arms resting on the structure of the walker and is not walking, and (ii) denotes the moments in which the subject is actually walking with the device. Three main components are identified in force signals: the vibrations introduced by floor/walker wheels imperfections, oscillations due to user's trunk motion during gait and the voluntary transient events related to the user's navigational commands.CC BY · PubMed Central
Figure 3 Signal processing architecture for user's intent component separation. Fij is the force signal obtained from axis (j), sensor (i). F(ιf)ij denotes the force signal obtained after the high frequency noise cancelation and F(cad)ij is the periodical, cadence-dependent component of force. Finally, F(filt)ij is the processed final signal related to user's navigation intent.
Figure 3 Signal processing architecture for user's intent component separation. Fij is the force signal obtained from axis (j), sensor (i). F(ιf)ij denotes the force signal obtained after the high frequency noise cancelation and F(cad)ij is the periodical, cadence-dependent component of force. Finally, F(filt)ij is the processed final signal related to user's navigation intent.CC BY · PubMed Central
Figure 4 Signal filtered with the selected g-h filter (Benedict-Bordner, g = g = 2.469·10-2). Dashed box shows a detail of the filtered signal (in red) compared with the original raw force data (in blue).
Figure 4 Signal filtered with the selected g-h filter (Benedict-Bordner, g = g = 2.469·10-2). Dashed box shows a detail of the filtered signal (in red) compared with the original raw force data (in blue).CC BY · PubMed Central
Figure 5 The Fourier Linear Combiner algorithm. The adaptation of the coefficients wk is performed based on the least-mean-square (LMS) recursion. yk is the input signal. The adaptive weight vector, Wk, generates a linear combination of the harmonic orthogonal sinusoidal components of the reference input vector, Xk. M is the number of the harmonics used and μ represents the amplitude adaptation gain used for the LMS recursion.
Figure 5 The Fourier Linear Combiner algorithm. The adaptation of the coefficients wk is performed based on the least-mean-square (LMS) recursion. yk is the input signal. The adaptive weight vector, Wk, generates a linear combination of the harmonic orthogonal sinusoidal components of the reference input vector, Xk. M is the number of the harmonics used and μ represents the amplitude adaptation gain used for the LMS recursion.CC BY · PubMed Central
Figure 6 Signal processing architecture for estimation of user's intent force component. Fij is the force signal obtained from axis (j), sensor (i). F(ιf)ij denotes the force signal obtained after the high frequency noise cancelation and F(cad)ij is the periodical, cadence-dependent component of force. Cadence estimation stage by means of WLFC is indicated with dashed lines.
Figure 6 Signal processing architecture for estimation of user's intent force component. Fij is the force signal obtained from axis (j), sensor (i). F(ιf)ij denotes the force signal obtained after the high frequency noise cancelation and F(cad)ij is the periodical, cadence-dependent component of force. Cadence estimation stage by means of WLFC is indicated with dashed lines.CC BY · PubMed Central
Figure 7 Final signal processing architecture for estimation of user's intent force component considering the possibility of asymmetrical supporting forces.
Figure 7 Final signal processing architecture for estimation of user's intent force component considering the possibility of asymmetrical supporting forces.CC BY · PubMed Central
Figure 8 The top graph (in black) shows the force data after the canceling of the high-frequency components for the tuning of the FLC algorithm. Middle graph shows the signal (in red) after the FLC filtering taking into account only the cadence frequency (one harmonic). Finally, the bottom graph (in blue) shows the filter output signal processed with the final FLC filter. The dashed box indicates the instants in which asymmetrical support is forced through a right turn performed with the walker.
Figure 8 The top graph (in black) shows the force data after the canceling of the high-frequency components for the tuning of the FLC algorithm. Middle graph shows the signal (in red) after the FLC filtering taking into account only the cadence frequency (one harmonic). Finally, the bottom graph (in blue) shows the filter output signal processed with the final FLC filter. The dashed box indicates the instants in which asymmetrical support is forced through a right turn performed with the walker.CC BY · PubMed Central
Figure 9 Graphical representation of the methodology for quantifying the canceling of the cadence related components of force data. R indicates the reduction of signal's energy within the cancelation range given by the frequency input of the FLC algorithm presented in this work.
Figure 9 Graphical representation of the methodology for quantifying the canceling of the cadence related components of force data. R indicates the reduction of signal's energy within the cancelation range given by the frequency input of the FLC algorithm presented in this work.CC BY · PubMed Central
Figure 10 On the left, representation of force data for the y axis of the left sensor in one experiment in three stages: raw force data (top), data after the BBF (middle) and final output (bottom). On the right, the spectrogram of the filtering input (top) and output (bottom) are presented along with the continuous line marking the continuous cadence estimation by means of WFLC. Important reductions in PSD of high frequencies and in both cadence harmonics are observed.
Figure 10 On the left, representation of force data for the y axis of the left sensor in one experiment in three stages: raw force data (top), data after the BBF (middle) and final output (bottom). On the right, the spectrogram of the filtering input (top) and output (bottom) are presented along with the continuous line marking the continuous cadence estimation by means of WFLC. Important reductions in PSD of high frequencies and in both cadence harmonics are observed.CC BY · PubMed Central
Figure 11 Complete system architecture implemented in the SIMBIOSIS walker's firmware. The output signals of the filtering architecture presented in this paper is used by a event detection algorithm that classify the signals in real-time and send navigational commands to the controller that commands directly the walker's dc motors. For illustration purposes, three areas are distinguish with blue boxes: (i) start walking, (ii) right turn and (iii) stop walking.
Figure 11 Complete system architecture implemented in the SIMBIOSIS walker's firmware. The output signals of the filtering architecture presented in this paper is used by a event detection algorithm that classify the signals in real-time and send navigational commands to the controller that commands directly the walker's dc motors. For illustration purposes, three areas are distinguish with blue boxes: (i) start walking, (ii) right turn and (iii) stop walking.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 2 Not valid · 8 Not checked · 28 Own results and interpretations

18 more claims

Create a free account to see all 38 claims and to verify the 4 references still open.

See all claims — free account
  • Probably not a substantial claim. 10
  • It may state two separate claims as one. 6

Create a free account to see these claims.

Citations

Cites

Show all 28 references

Research works printed but not linked: 2

  1. Frizera A, Gallego J, Rocon de Lima E, Abellanas A, Pons J, Ceres R: Online Cadence Estimation through Force Interaction in Walker Assisted Gait. ISSNIP Biosignals and Biorobotics Conference 2010, Vitoria, Brazil 2010, 1–5.
  2. Frizera A, Abellanas A, Ceres R, Pons JL, Raya R: Study and Characterization of Feet Kinematics in Walker Assisted Gait. Revista Iberoamericana de Automatica e Informatica Industrial (RIAI) 2009, 6(4):74–84.

Cited by

See all 49

Metadata

Authors
Frizera Neto, A., Gallego, J. A., Rocon, E., Pons, J. L., & Ceres, R.
Affiliations
Consejo Superior de Investigaciones Científicas (ES)
Venue
BioMedical Engineering OnLine
Published
2010-08-05
Volume
9
Issue
1
Pages
37-37
ISSN
1475-925X (ISSN-L)
OpenAlex
W2104060902
Cited by
48
References
28
Citations by year
2026: 2 · 2025: 1 · 2024: 2 · 2023: 3 · 2022: 3 · 2021: 8 · 2020: 3 · 2019: 3 · 2018: 2 · 2016: 4 · 2015: 3 · 2014: 4 · 2013: 3 · 2012: 4
FWCI
1.89
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • BioMedical Engineering OnLine (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
Ministerio de Ciencia e Innovación
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics
  • Health Sciences › Health Professions › Occupational Therapy › Assistive Technology in Communication and Mobility
  • Health Sciences › Health Professions › Physical Therapy, Sports Therapy and Rehabilitation › Balance, Gait, and Falls Prevention
Keywords
rollator, robotic walker, trunk oscillation
MeSH terms
Algorithms, Biomechanical Phenomena, Gait, Robotics, User-Computer Interface, Walkers, Reproducibility of Results

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Extraction of user's navigation commands from upper body force interaction in walker assisted gait. https://app.cochat.ai/papers/10.1186/1475-925x-9-37
The paper
Frizera Neto, A., Gallego, J. A., Rocon, E., Pons, J. L., & Ceres, R. (2010). Extraction of user's navigation commands from upper body force interaction in walker assisted gait. BioMedical Engineering OnLine. https://doi.org/10.1186/1475-925x-9-37

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.