The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization
Open accessAbstract
Three-dimensional microscopy has become an increasingly popular materials characterization technique. This has resulted in a standardized processing scheme for most datasets. Such a scheme has motivated the development of a robust software package capable of performing each stage of post-acquisition processing and analysis. This software has been termed Materials Image Processing and Automated Reconstruction (MIPAR™). Developed in MATLAB™, but deployable as a standalone cross-platform executable, MIPAR™ leverages the power of MATLAB’s matrix processing algorithms and offers a comprehensive graphical software solution to the multitude of 3D characterization problems. MIPAR™ consists of five modules, three of which (Image Processor, Batch Processor, and 3D Toolbox) are required for full 3D characterization. Each module is dedicated to different stages of 3D data processing: alignment, pre-processing, segmentation, visualization, and quantification. With regard to pre-processing, i.e., the raw-intensity-enhancement steps that aid subsequent segmentation, MIPAR’s Image Processor module includes a host of contrast enhancement and noise reduction filters, one of which offers a unique solution to ion-milling-artifact reduction. In the area of segmentation, a methodology has been developed for the optimization of segmentation algorithm parameters, and graphically integrated into the Image Processor. Additionally, a 3D data structure and complementary user interface has been developed which permits the binary segmentation of complex, multi-phase microstructures. This structure has also permitted the integration of 3D EBSD data processing and visualization tools, along with support of additional algorithms for the fusion of multi-modal datasets. Finally, in the important field of quantification, MIPAR™ offers several direct 3D quantification tools across the global, feature-by-feature, and localized classes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multimodality image registration by maximization of mutual information
Maes, F., Collignon, A., Vandermeulen, D., Marchal, G., & Suetens, P. (1997) · IEEE Transactions on Medical Imaging · doi:10.1109/42.563664 · Cited by 4,547
Cited by
Laboratory x-ray micro-computed tomography: a user guideline for biological samples
du Plessis, A., Broeckhoven, C., Guelpa, A., & le Roux, S. G. (2017) · GigaScience · doi:10.1093/gigascience/gix027 · Cited by 374
Altered Cardiac Energetics and Mitochondrial Dysfunction in Hypertrophic Cardiomyopathy
Ranjbarvaziri, S., Kooiker, K. B., Ellenberger, M., Fajardo, G., Zhao, M., Vander Roest, A. S., Woldeyes, R. A., Koyano, T. T., Fong, R., Ma, N., et al. (2021) · Circulation · doi:10.1161/circulationaha.121.053575 · Cited by 309
Root anatomy and soil resource capture
Lynch, J. P., Strock, C. F., Schneider, H. M., Sidhu, J. S., Ajmera, I., Galindo-Castañeda, T., Klein, S. P., & Hanlon, M. T. (2021) · Plant and Soil · doi:10.1007/s11104-021-05010-y · Cited by 257
Rao, A., Lyu, B., Jahan, I., Lubertozzi, A., Zhou, G., Tedeschi, F., Jankowsky, E., Kang, J., Carstens, B., Poss, K. D., et al. (2023) · Development · doi:10.1242/dev.201376 · Cited by 13
Metadata
- Authors
- Sosa, J. M., Huber, D. E., Welk, B., & Fraser, H. L.
- Venue
- Integrating Materials and Manufacturing Innovation
- Published
- 2014-04-09
- Volume
- 3
- Issue
- 1
- Pages
- 123-140
- ISSN
- 2193-9764 (ISSN-L)
- 2193-9772
- OpenAlex
- W2140099440
- Cited by
- 232
- References
- 1
- FWCI
- 4.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization. https://app.cochat.ai/papers/10.1186/2193-9772-3-10
- The paper
- Sosa, J. M., Huber, D. E., Welk, B., & Fraser, H. L. (2014). Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization. Integrating Materials and Manufacturing Innovation. https://doi.org/10.1186/2193-9772-3-10
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.