The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
ZnO Nanoparticles/Reduced Graphene Oxide Bilayer Thin Films for Improved NH3-Sensing Performances at Room Temperature
Open accessAbstract
ZnO nanoparticles and graphene oxide (GO) thin film were deposited on gold interdigital electrodes (IDEs) in sequence via simple spraying process, which was further restored to ZnO/reduced graphene oxide (rGO) bilayer thin film by the thermal reduction treatment and employed for ammonia (NH3) detection at room temperature. rGO was identified by UV-vis absorption spectra and X-ray photoelectron spectroscope (XPS) analyses, and the adhesion between ZnO nanoparticles and rGO nanosheets might also be formed. The NH3-sensing performances of pure rGO film and ZnO/rGO bilayer films with different sprayed GO amounts were compared. The results showed that ZnO/rGO film sensors exhibited enhanced response properties, and the optimal GO amount of 1.5 ml was achieved. Furthermore, the optimal ZnO/rGO film sensor showed an excellent reversibility and fast response/recovery rate within the detection range of 10-50 ppm. Meanwhile, the sensor also displayed good repeatability and selectivity to NH3. However, the interference of water molecules on the prepared sensor is non-ignorable; some techniques should be researched to eliminate the effect of moisture in the further work. The remarkably enhanced NH3-sensing characteristics were speculated to be attributed to both the supporting role of ZnO nanoparticles film and accumulation heterojunction at the interface between ZnO and rGO. Thus, the proposed ZnO/rGO bilayer thin film sensor might give a promise for high-performance NH3-sensing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Humidity sensing properties of ZnO-based fibers by electrospinning
Horzum, N., Taşçıoglu, D., Okur, S., & Demir, M. M. (2011) · Talanta · doi:10.1016/j.talanta.2011.05.031 · Cited by 82
Cited by
Room-temperature gas sensing of ZnO-based gas sensor: A review
Zhu, L., & Zeng, W. (2017) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2017.10.021 · Cited by 1,105
Li, Z., Li, H., Wu, Z., Wang, M., Luo, J., Torun, H., Hu, P., Yang, C., Grundmann, M., Liu, X., et al. (2019) · Materials Horizons · doi:10.1039/c8mh01365a · Cited by 760
Enhanced ammonia response of Ti3C2T nanosheets supported by TiO2 nanoparticles at room temperature
Tai, H., Duan, Z., He, Z., Li, X., Xu, J., Liu, B., & Jiang, Y. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.126874 · Cited by 325
Self-citationImproved gas sensing performance of Al doped ZnO/CuO nanocomposite based ammonia gas sensor
Poloju, M., Jayababu, N., & Ramana Reddy, M. V. (2018) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2017.10.012 · Cited by 273
Zhang, D., Wu, Z., & Zong, X. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.03.055 · Cited by 264
Metadata
- Authors
- Tai, H., Yuan, Z., Zheng, W., Ye, Z., Liu, C., & Du, X.
- Venue
- Nanoscale Research Letters
- Published
- 2016-03-08
- Volume
- 11
- Issue
- 1
- Pages
- 130-130
- ISSN
- 1556-276X (ISSN-L)
- 1931-7573
- OpenAlex
- W2296289143
- Cited by
- 168
- References
- 1
- FWCI
- 9.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: ZnO Nanoparticles/Reduced Graphene Oxide Bilayer Thin Films for Improved NH3-Sensing Performances at Room Temperature. https://app.cochat.ai/papers/10.1186/s11671-016-1343-7
- The paper
- Tai, H., Yuan, Z., Zheng, W., Ye, Z., Liu, C., & Du, X. (2016). ZnO Nanoparticles/Reduced Graphene Oxide Bilayer Thin Films for Improved NH3-Sensing Performances at Room Temperature. Nanoscale Research Letters. https://doi.org/10.1186/s11671-016-1343-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.