CoChat

In vitro biomimetic development of artificial dental calculus: a proof of concept study

Open access

The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index; 9 of the 40 sources its claims cite were checked for support.

Abstract

BACKGROUND: To develop an in vitro model to generate dental calculus through a standardized process of biofilm mineralization, and compare it with natural human dental calculus . METHODS: The proposed in vitro model consisted of two staged procedures: first biofilm formation and then its mineralization. After a 72-hour pre-culture, biofilms of Streptococcus mutans were formed on a glass dish in artificial saliva with 1% sucrose for 3 h. Then the calcification process consisted of incubating the sample in supersaturated mineral solution for 21 h. These steps were repeated for 5 days. The samples were then divided into 3 groups based on the different processes; (i) mineralization only, (ii) biofilm formation only, (iii) biofilm formation and mineralization. Obtained samples were compared morphologically with human supragingival calculus using scanning electron microscopy, quantitative light-induced fluorescence, and energy-dispersive X-ray spectroscopy. Confocal laser scanning microscopy was used to assess bacterial distribution and viability, and X-ray diffraction analysis was performed to evaluate the crystallinity of the mineral deposits. A solubility test was also conducted to assess structural stability. RESULTS: The artificially developed calculus exhibited similar characteristics to human dental calculus including a layered structure with bacterial embedded in a porous mineral matrix, and comparable ratio of inorganic components. No weight loss was observed before or after the solubility test. CONCLUSION: Artificial calculus synthesized through this novel biofilm mineralization model demonstrated structural and chemical characteristics consistent with early-stage human dental calculus.

Overview

CoChat Summary

TL;DR

This proof-of-concept study developed a standardized in vitro model that repeatedly cycles *Streptococcus mutans* biofilm formation and mineralization to produce artificial dental calculus. The resulting BF + MU samples resembled early-stage human supragingival calculus in morphology, elemental composition, and low solubility, though with limited crystallinity.

Key findings

  • The BF + MU group showed a layered/lamellated mineralized structure with embedded bacteria, similar to human calculus. Vertical thickness was 219.33 ± 42.29 μm for BF + MU, 608.60 ± 48.40 μm for BF, and 4.63 ± 0.63 μm for MU; overall group difference was significant (p < 0.05), but post-hoc pairwise comparisons were not (p > 0.017).
  • EDS showed BF + MU calcium 6.79 ± 2.61% and phosphorus 5.05 ± 1.72%, with a Ca/P molar ratio of 1.02 ± 0.08. Human calculus had calcium 23.37 ± 7.78%, phosphorus 9.59 ± 1.78%, and Ca/P 1.79 ± 0.50; BF + MU did not differ significantly from human calculus, while MU differed significantly from human calculus (p < 0.008).
  • XRD of BF + MU revealed an amorphous pattern with no distinct crystalline peaks, indicating limited crystallinity. In solubility testing, BF + MU showed no weight change after 72 h in water, while BF produced the greatest product formation at 26 mg and lost weight; overall weight change differed among groups (p < 0.05), but post-hoc comparisons were not significant (p > 0.017).
  • QLF and CLSM indicated denser bacterial clusters in BF + MU than BF, with isolated bacterial colonization and strong EPS signal in low-colony regions of BF + MU.

Methods

  • Proof-of-concept in vitro model: *S. mutans* ATCC 25175 biofilms formed on glass slides in artificial saliva with 1% sucrose, including a 72-h pre-culture and 3-h biofilm formation, followed by 21-h mineralization in supersaturated mineral solution at pH 9.5 and 36.5 °C; the cycle was repeated five times. Groups were mineralization only (MU), biofilm formation only (BF), and biofilm formation plus mineralization (BF + MU).
  • Human supragingival calculus from 5 systemically and periodontally healthy adults was used as a positive control.
  • Analyses included SEM, EDS, XRD, QLF, CLSM, and solubility testing; group comparisons used Kruskal-Wallis tests with Mann-Whitney U post-hoc tests and Bonferroni correction (p < 0.017). Sample numbers varied by assay, e.g., EDS used 5 MU, 3 BF, 4 BF + MU, and 5 human calculus samples; SEM, CLSM, and solubility used 4 samples per group.

Limitations

  • The paper states that the model used a single bacterial species, *S. mutans*, so it did not capture the multispecies microbial complexity of natural calculus.
  • The paper states that the relatively short mineralization period likely produced premature rather than fully matured deposits, supported by XRD showing limited crystallinity; it also notes the model addresses supragingival rather than subgingival calculus.
  • Evident from the text: sample sizes were small and data were non-normal, leading to non-parametric tests; several overall significant differences did not remain significant after Bonferroni-corrected post-hoc comparisons.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1186/s12903-025-07050-7

Cites

25 of 25 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Schematic of the artificial calculus formation using a double-jar artificial mouth model
Fig. 1 Schematic of the artificial calculus formation using a double-jar artificial mouth modelCC BY-NC-ND · PubMed Central
Fig. 2 Experimental workflow for the mineralization-only (MU), biofilm-only (BF), and combined biofilm and mineralization (BF + MU) groups. The MU group represents samples subjected exclusively to the mineralization process, without biofilm exposure. The BF group includes samples exposed only to biofilm formation in distilled water, without mineralization. The BF + MU group represents samples that underwent both biofilm formation and mineralization processes
Fig. 2 Experimental workflow for the mineralization-only (MU), biofilm-only (BF), and combined biofilm and mineralization (BF + MU) groups. The MU group represents samples subjected exclusively to the mineralization process, without biofilm exposure. The BF group includes samples exposed only to biofilm formation in distilled water, without mineralization. The BF + MU group represents samples that underwent both biofilm formation and mineralization processesCC BY-NC-ND · PubMed Central
Fig. 3 Images of the QLF analysis. QLF imaging was performed under both white and blue light following each cycle of biofilm formation and calcification. Scale bars = 5 mm
Fig. 3 Images of the QLF analysis. QLF imaging was performed under both white and blue light following each cycle of biofilm formation and calcification. Scale bars = 5 mmCC BY-NC-ND · PubMed Central
Fig. 4 Representative SEM images of the four experimental groups acquired at multiple magnifications. Horizontal (plan-view) images illustrate microbial surface morphology, and vertical (side-view) images depict sample thickness. For each group, images were captured at x25, x500, x2 000, x10 000 (scale bars = 1 mm, 50 μm, 10 μm, and 2 μm, respectively)
Fig. 4 Representative SEM images of the four experimental groups acquired at multiple magnifications. Horizontal (plan-view) images illustrate microbial surface morphology, and vertical (side-view) images depict sample thickness. For each group, images were captured at x25, x500, x2 000, x10 000 (scale bars = 1 mm, 50 μm, 10 μm, and 2 μm, respectively)CC BY-NC-ND · PubMed Central
Fig. 5 CLSM analysis of bacterial cells and EPS. Green fluorescence represents bacterial colonization while red represents EPS, the byproducts of bacteria. Blue box shows the randomly selected ROI of BF group. RED and GREEN boxes represent the area with most bacterial growth and the area with less bacterial growth, respectively
Fig. 5 CLSM analysis of bacterial cells and EPS. Green fluorescence represents bacterial colonization while red represents EPS, the byproducts of bacteria. Blue box shows the randomly selected ROI of BF group. RED and GREEN boxes represent the area with most bacterial growth and the area with less bacterial growth, respectivelyCC BY-NC-ND · PubMed Central
Fig. 6 Weight change after solubility test. Error bars indicate the standard deviation (SD) calculated from four independent measurements
Fig. 6 Weight change after solubility test. Error bars indicate the standard deviation (SD) calculated from four independent measurementsCC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

7 Valid · 1 Not valid · 15 Not checked · 92 Own results and interpretations

69 more claims · 1 with their cited sources checked

Create a free account to see all 115 claims and to verify the 31 references still open.

See all claims — free account
  • Probably not a substantial claim. 13
  • It may state two separate claims as one. 30

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Show all 25 references

Research works printed but not linked: 3

  1. Lang NP, Lindhe J. Clinical periodontology and implant dentistry. 6th ed. Wiley Blackwell; 2015.
  2. Iorgulescu G. Saliva between normal and pathological. Important factors in determining systemic and oral health. J Med Life. 2009;2(3):303.
  3. Lemos JA, Palmer SR, Zeng L, Wen ZT, Kajfasz JK, Freires IA, Abranches J, Brady LJ. The biology of Streptococcus mutans. Microbiol Spectr. 2019;7(1):GPP3-0051-2018. https://doi.org/10.1128/microbiolspec.gpp1123-0051-2018. · doi:10.1128/microbiolspec.gpp1123-0051-2018

Cited by

See all 2

Metadata

Authors
Cha, J.-K., Paeng, K.-W., Yoo, S. H., Lee, C. H., Kwon, Y.-H., Jung, U.-W., Kim, B.-I., Jung, H.-I., Feres, M., & Sanz, M.
Affiliations
  • Harvard University (US)
  • Yonsei University (KR)
  • Universidad Complutense de Madrid (ES)
Corresponding author
Cha, Jae-Kook
Venue
BMC Oral Health
Published
2025-10-29
Volume
25
Issue
1
Pages
1694-1694
ISSN
1472-6831 (ISSN-L)
OpenAlex
W4415660772
Cited by
2
References
25
Citations by year
2026: 2
FWCI
1.85
Type
journal article
Language
en
Open access
Licence
Locations
  • BMC Oral Health (publishedVersion, cc-by-nc-nd)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Research Foundation
  • Ministry of Science and ICT, South Korea (2022M3A9F3016364)
Topics
  • Health Sciences › Dentistry › Periodontics › Oral microbiology and periodontitis research
  • Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
Keywords
dental calculus, supragingival calculus, in vitro model, Streptococcus mutans, biofilm formation, artificial saliva, bacterial viability, mineral crystallinity, biomimetic systems
MeSH terms
Proof of Concept Study, Dental Calculus, Humans, Microscopy, Electron, Scanning, Saliva, Artificial, Spectrometry, X-Ray Emission, Streptococcus mutans, X-Ray Diffraction, Biofilms, Microscopy, Confocal, Biomimetics, In Vitro Techniques

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-05, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-05 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: In vitro biomimetic development of artificial dental calculus: a proof of concept study. https://app.cochat.ai/papers/10.1186/s12903-025-07050-7
The paper
Cha, J.-K., Paeng, K.-W., Yoo, S. H., Lee, C. H., Kwon, Y.-H., Jung, U.-W., Kim, B.-I., Jung, H.-I., Feres, M., & Sanz, M. (2025). In vitro biomimetic development of artificial dental calculus: a proof of concept study. BMC Oral Health. https://doi.org/10.1186/s12903-025-07050-7

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.