CoChat

The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index; 6 of the 19 sources its claims cite were checked for support.

Innovative landing zones for one-piece, rigidly fixated patient-specific subperiosteal implants in dental rehabilitation of severe maxillary and midfacial defects

Open access

Abstract

Purpose of the study: This study demonstrates and investigates the feasibility of a novel approach for dental rehabilitation in complex maxillary and midfacial defects, often resulting in severe pseudo-class III relationships. It explores the use of patient-specific subperiosteal implants (IPS Implants ® Preprosthetic) with innovative design variations that anchor to the skull base from below and laterally, extending beyond traditional implants to provide enhanced stability in cases of significant bone loss. Methods: Patients with significant maxillary and midfacial bone loss due to postablative defects were included in our case series, with or without irradiation. From 100 patients, 13 required design modifications based on FEM analysis, involving implant anchorage to the lateral skull base and/or pterygoid process. Eight patients received single-sided lateral skull base extensions; one posttraumatic case required bilateral extensions. In five of 13 cases, additional extensions to the pterygoid process were implemented. One case needed both bilateral skull base and pterygoid extensions, while two had bilateral pterygoid and a single-sided skull base extension. Outcomes assessed included primary stability, prosthodontic restoration, complications, and soft tissue management. Results: No implant failures occurred during follow-up, with functional stability established immediately post-insertion. Prosthodontic restoration succeeded in all cases, with no stability loss or periimplantitis. Mucositis was noted around posterior posts in some instances, and one bar required trimming due to soft tissue changes, without affecting implant function. One implant had to be removed, due to chronic pain. Conclusions: Patient-specific IPS Implants ® Preprosthetic with design extensions provide a biologically suitable solution for stable dental rehabilitation in severe maxillary and midfacial structure loss, without biomechanical limitations. Achieving rigid fixation distant from the soft tissue transition is crucial for success.

Overview

CoChat Summary

## TL;DR

This case series describes a patient-specific subperiosteal implant approach for severe maxillary and midfacial defects, using new anchorage zones at the lateral skull base and/or pterygoid process when conventional buttress fixation was not biomechanically feasible. In 13 selected patients, the modified implants achieved immediate functional stability with no implant failures during follow-up, though one implant was removed due to chronic pain and infection.

## Key findings

  • From a group of 100 patients treated with IPS Implants® Preprosthetic over 9 years, 13 required design modifications guided by FEM analysis because standard maxillary/midfacial buttresses were not feasible for stable anchorage.
  • Of those 13 cases, 8 received a single-sided lateral skull base extension; 1 posttraumatic case required bilateral extensions; 5 cases had additional pterygoid process extensions; 1 case needed both bilateral skull base and pterygoid extensions; and 2 had bilateral pterygoid extensions plus a single-sided skull base wing extension.
  • Follow-up ranged from 9 to 52 months, with a median of 37.5 months; no implant failures occurred during follow-up, prosthodontic restoration succeeded in all cases, and functional stability was established immediately after insertion.
  • Complications were limited to mucositis around posterior posts in some instances, one bar trimming for soft tissue change, and one implant removal due to chronic pain; later in the Results, the paper also states one implant was removed due to chronic pain and infection and that two patients died during follow-up.

## Methods

  • Case series of patients treated at Hannover Medical School between 2020 and 2024 with IPS Implants® Preprosthetic for postablative maxillary or midfacial defects, with or without irradiation.
  • Inclusion required postablative maxillary/midface defects plus insufficient stability in preproduction FEM analysis and a modified implant design with additional buttresses at the pterygoid process or zygomatic arch.
  • Preoperative planning used CBCT datasets and prosthodontic backward planning; outcomes tracked included soft tissue modifications, screws per post, secondary interventions, infection, implant fracture, prosthodontic suprastructure, masticatory function, and peri-/postoperative complications.

## Limitations

  • The paper explicitly states the study is limited by its small sample size and case-study design.
  • The text also makes evident that the evidence is highly selected and heterogeneous, because only 13 of 100 treated patients required the reported modifications and the included cases varied widely in defect type and prior treatment history.
  • The follow-up was variable (9 to 52 months), which limits uniform assessment of longer-term outcomes.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1186/s13005-025-00549-y

Cites

32 of 32 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 FEM-analysis of a preliminary IPS Implants® Preprosthetic for reconstruction of right hemi-maxillary defect (a), with insufficient stability of the most posterior post. Revised design features an extension to the right pterygoid process as additional buttress (b), resulting in better load distribution in the FEM-analysis
Fig. 1 FEM-analysis of a preliminary IPS Implants® Preprosthetic for reconstruction of right hemi-maxillary defect (a), with insufficient stability of the most posterior post. Revised design features an extension to the right pterygoid process as additional buttress (b), resulting in better load distribution in the FEM-analysisCC BY · PubMed Central
Fig. 2 Following radical ablation and adjuvant curative intended radiotherapy elsewhere, in addition to the left lateral maxillary sequestration, the coronal view of the CT scan reveals an exenterated central midface defect with sclerotic bone formation and partial loss of the left orbital walls, along with a rounded inferior rectus muscle
Fig. 2 Following radical ablation and adjuvant curative intended radiotherapy elsewhere, in addition to the left lateral maxillary sequestration, the coronal view of the CT scan reveals an exenterated central midface defect with sclerotic bone formation and partial loss of the left orbital walls, along with a rounded inferior rectus muscleCC BY · PubMed Central
Fig. 3 Intraoral view (a) of the patient in Fig. 1 with the individual attempt of a temporary combined obturating and multipart dental prosthesis (a-d) (note: magnetic elements helped stabilize the multi-piece construction)
Fig. 3 Intraoral view (a) of the patient in Fig. 1 with the individual attempt of a temporary combined obturating and multipart dental prosthesis (a-d) (note: magnetic elements helped stabilize the multi-piece construction)CC BY · PubMed Central
Fig. 4 a - b: Two views from the interactive PDF case planning (patient from Figs. 1 and 2) of the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the enface (a) and oblique lateral view (b); the virtually dentate patient is depicted in (a) where the segmented left maxilla (orange) shows the area of unclear vascularity; the first provisional prosthesis, designed with a high-water level, is shown mounted onto the IPS Implants® Preprosthetic in (b). Notice: not any hole displayed is expected to be mounted with a screw
Fig. 4 a - b: Two views from the interactive PDF case planning (patient from Figs. 1 and 2) of the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the enface (a) and oblique lateral view (b); the virtually dentate patient is depicted in (a) where the segmented left maxilla (orange) shows the area of unclear vascularity; the first provisional prosthesis, designed with a high-water level, is shown mounted onto the IPS Implants® Preprosthetic in (b). Notice: not any hole displayed is expected to be mounted with a screwCC BY · PubMed Central
Fig. 5 a – f: Preoperatively, the isolated IPS Implants® Preprosthetic from the patient in Fig. 3 with three posts is displayed in (a), and mounted intraoperatively onto the autoclaved patient’s biomodel showing the long extension to the left lateral skull base (b). The insertion and screw fixation are provided transorally versus preauricularly at the root of the zygomatic arch (b, c); telescopes are used as primary crowns (d) for the final suprastructure, which is shown in (e) & (f). [note: the additionally placed radial forearm flap allowed for the rehabilitation of the vestibular side to the lip, whereas the latissimus dorsi flap served to obliterate the devascularized central midface and to reconstruct the horizontal subunit of the hard palate (d)]
Fig. 5 a – f: Preoperatively, the isolated IPS Implants® Preprosthetic from the patient in Fig. 3 with three posts is displayed in (a), and mounted intraoperatively onto the autoclaved patient’s biomodel showing the long extension to the left lateral skull base (b). The insertion and screw fixation are provided transorally versus preauricularly at the root of the zygomatic arch (b, c); telescopes are used as primary crowns (d) for the final suprastructure, which is shown in (e) & (f). [note: the additionally placed radial forearm flap allowed for the rehabilitation of the vestibular side to the lip, whereas the latissimus dorsi flap served to obliterate the devascularized central midface and to reconstruct the horizontal subunit of the hard palate (d)]CC BY · PubMed Central
Fig. 6 a – d: Preoperatively, a lateral 3D view from the right side of the helical CT scan is displayed in (a); intraorally, the extensive defect with the absent hard (and soft) palate is visible (b); the large obturating maxillary defect prosthesis is shown in (c) & (d) (note: this prosthesis was non-functioning in the affected patient)
Fig. 6 a – d: Preoperatively, a lateral 3D view from the right side of the helical CT scan is displayed in (a); intraorally, the extensive defect with the absent hard (and soft) palate is visible (b); the large obturating maxillary defect prosthesis is shown in (c) & (d) (note: this prosthesis was non-functioning in the affected patient)CC BY · PubMed Central
Fig. 7 a – h: Preoperatively, before (a, b, e, f) and after microvascular soft tissue reconstruction (c, d, g, h) of ablated intraoral horizontal and intra-/extraoral vertical anatomical subunits. Two plane views (coronal (a) and sagittal (b)) display possible bony anchorage on the right pterygoid process; the left pterygoid process is completely missing. The extended pseudo-class III is strikingly obvious (b, e, f), especially with the radiopaque template for the intended maxillary dental rehabilitation (c); after lateral upper arm free flap (for horizontal subunit of hard and soft palate) and split radial forearm free flap (for intra- and extraoral vertical subunit of lip and vestibule) reconstruction (d, g, h), the preexisting postablative huge pseudo-class III is nearly compensated
Fig. 7 a – h: Preoperatively, before (a, b, e, f) and after microvascular soft tissue reconstruction (c, d, g, h) of ablated intraoral horizontal and intra-/extraoral vertical anatomical subunits. Two plane views (coronal (a) and sagittal (b)) display possible bony anchorage on the right pterygoid process; the left pterygoid process is completely missing. The extended pseudo-class III is strikingly obvious (b, e, f), especially with the radiopaque template for the intended maxillary dental rehabilitation (c); after lateral upper arm free flap (for horizontal subunit of hard and soft palate) and split radial forearm free flap (for intra- and extraoral vertical subunit of lip and vestibule) reconstruction (d, g, h), the preexisting postablative huge pseudo-class III is nearly compensatedCC BY · PubMed Central
Fig. 8 a – c: Three views from the interactive PDF of the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the lateral view (a, b), the postablative condition is visible with a massive pseudo-class III and intended provisional dental prosthesis (a-c); the IPS Implants® Preprosthetic is in place, with dotted encirclements showing the anchorage on the right pterygoid process and the lateral skull base (a red cross marks the condylar head) (a). The en face view (c) and lateral view (b) demonstrate additional 3D features of the patient-specific subperiosteal implant, including small hooks around the piriform aperture (please note: a one-piece design is strongly recommended for single-jaw dental rehabilitation, and this is ensured with the subnasal connecting bar)
Fig. 8 a – c: Three views from the interactive PDF of the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the lateral view (a, b), the postablative condition is visible with a massive pseudo-class III and intended provisional dental prosthesis (a-c); the IPS Implants® Preprosthetic is in place, with dotted encirclements showing the anchorage on the right pterygoid process and the lateral skull base (a red cross marks the condylar head) (a). The en face view (c) and lateral view (b) demonstrate additional 3D features of the patient-specific subperiosteal implant, including small hooks around the piriform aperture (please note: a one-piece design is strongly recommended for single-jaw dental rehabilitation, and this is ensured with the subnasal connecting bar)CC BY · PubMed Central
Fig. 9 a, b: The single IPS Implants® Preprosthetic is displayed in (a) & (b), where the crucial design modifications are encircled with a red dotted line; these key modifications allow for more distant levering and functionally stable screw retention to enable a rigidly fixated subperiosteal implant that can be fully loaded primarily
Fig. 9 a, b: The single IPS Implants® Preprosthetic is displayed in (a) & (b), where the crucial design modifications are encircled with a red dotted line; these key modifications allow for more distant levering and functionally stable screw retention to enable a rigidly fixated subperiosteal implant that can be fully loaded primarilyCC BY · PubMed Central
Fig. 10 a – c: Three views of the heatmap from an FEM analysis of the implant planning (a-c); this ensures that the design is unlikely to result in biomechanical failure, and that four posts in combination with the displayed implant design are fully adequate to withstand the chewing forces and provide dental rehabilitation for the maxillectomy patient. The distant anchorage enables the utilization of better vascularized and more well-enclosed soft tissue lever zones
Fig. 10 a – c: Three views of the heatmap from an FEM analysis of the implant planning (a-c); this ensures that the design is unlikely to result in biomechanical failure, and that four posts in combination with the displayed implant design are fully adequate to withstand the chewing forces and provide dental rehabilitation for the maxillectomy patient. The distant anchorage enables the utilization of better vascularized and more well-enclosed soft tissue lever zonesCC BY · PubMed Central
Fig. 11 a – f: Intraoperative view of the IPS Implants® Preprosthetic and the mounted high-water provisional prosthesis (a); dissection transorally runs subperiosteally over the zygomatic arch to the ipsilateral preauricular release incision (b); the one-fit-only design can be controlled transorally on the pterygoid process (c) and lateral skull base (e); two screws provide rigid fixation on the right pterygoid process (f); the postoperative situation is displayed with the orthopantomogram (d)
Fig. 11 a – f: Intraoperative view of the IPS Implants® Preprosthetic and the mounted high-water provisional prosthesis (a); dissection transorally runs subperiosteally over the zygomatic arch to the ipsilateral preauricular release incision (b); the one-fit-only design can be controlled transorally on the pterygoid process (c) and lateral skull base (e); two screws provide rigid fixation on the right pterygoid process (f); the postoperative situation is displayed with the orthopantomogram (d)CC BY · PubMed Central
Fig. 12 Screenshot of intraoperative navigation using the Curve® System (Brainlab, Munich, Germany) during insertion of IPS Implants® Preprosthetic with the pointer tracked at the root of the right zygomatic arch to validate real-time the available bone stock prior to drilling for screw retention. The STL model of the IPS Implants® Preprosthetic is displayed in the four-field view in all three multiplanar perspectives (i.e., axial, coronal, sagittal) and a 3D view
Fig. 12 Screenshot of intraoperative navigation using the Curve® System (Brainlab, Munich, Germany) during insertion of IPS Implants® Preprosthetic with the pointer tracked at the root of the right zygomatic arch to validate real-time the available bone stock prior to drilling for screw retention. The STL model of the IPS Implants® Preprosthetic is displayed in the four-field view in all three multiplanar perspectives (i.e., axial, coronal, sagittal) and a 3D viewCC BY · PubMed Central
Fig. 13 a - d: Two clinical extraoral views (a, b) show the patient definitively provided with dental prosthesis after completion of the surgical rehabilitation with microvascular reconstruction of vertical and horizontal anatomical subunits and integration of the IPS Implants® Preprosthetic, with evidence of acceptable though not normal lip competency. The severe pseudo-class III malocclusion is compensated for without the need for bone grafting in the resected upper jaw and midface area. Two intraoral views (c, d) show the final bar-retained removable overdenture; the noticeable pigmentations subnasally and in the reconstructed palate result from the tattooing of the transferred microvascular autogenous flap grafts
Fig. 13 a - d: Two clinical extraoral views (a, b) show the patient definitively provided with dental prosthesis after completion of the surgical rehabilitation with microvascular reconstruction of vertical and horizontal anatomical subunits and integration of the IPS Implants® Preprosthetic, with evidence of acceptable though not normal lip competency. The severe pseudo-class III malocclusion is compensated for without the need for bone grafting in the resected upper jaw and midface area. Two intraoral views (c, d) show the final bar-retained removable overdenture; the noticeable pigmentations subnasally and in the reconstructed palate result from the tattooing of the transferred microvascular autogenous flap graftsCC BY · PubMed Central
Fig. 14 a – d: Preoperatively, a posterior lateral view from the left side of the patient with the pronounced left cervical metastasis (a) is depicted; intraorally, in the closed bite (b), and in the bottom view, the extensive malignant melanoma becomes apparent
Fig. 14 a – d: Preoperatively, a posterior lateral view from the left side of the patient with the pronounced left cervical metastasis (a) is depicted; intraorally, in the closed bite (b), and in the bottom view, the extensive malignant melanoma becomes apparentCC BY · PubMed Central
Fig. 15 a – e: Intraoperatively, the tumor resection including the intended safety margin is visible as a complete maxillectomy (a); on the left cervical side, the internal jugular vein is dissected out, and the metastasis is removed as part of the left neck dissection (b, c); in (d), the microvascular lateral upper arm free flap is depicted as part of a delayed primary reconstruction, i.e., two-stage after obtaining definitive histology, and after integration (e)
Fig. 15 a – e: Intraoperatively, the tumor resection including the intended safety margin is visible as a complete maxillectomy (a); on the left cervical side, the internal jugular vein is dissected out, and the metastasis is removed as part of the left neck dissection (b, c); in (d), the microvascular lateral upper arm free flap is depicted as part of a delayed primary reconstruction, i.e., two-stage after obtaining definitive histology, and after integration (e)CC BY · PubMed Central
Fig. 16 a – d: Four views from the interactive PDF from the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the lateral view (a, b), the post-ablative condition is visible with massive pseudo-class III and intended provisional dental prosthesis (a) (please note: two green vectors represent the possible screw anchors in the bilateral pterygoid process area), accordingly, in (b), the scanned mandible model is matched to the cone-beam CT dataset. The additionally introduced IPS Implants® Preprosthetic with the possible screw positions are shown in the frontal (c) and lateral views (d) (Note: The screw positions indicated above the zygomatic prominence and zygomatic arch are typically not utilized)
Fig. 16 a – d: Four views from the interactive PDF from the IPS-Gate (KLS Martin Group, Tuttlingen, Germany). In the lateral view (a, b), the post-ablative condition is visible with massive pseudo-class III and intended provisional dental prosthesis (a) (please note: two green vectors represent the possible screw anchors in the bilateral pterygoid process area), accordingly, in (b), the scanned mandible model is matched to the cone-beam CT dataset. The additionally introduced IPS Implants® Preprosthetic with the possible screw positions are shown in the frontal (c) and lateral views (d) (Note: The screw positions indicated above the zygomatic prominence and zygomatic arch are typically not utilized)CC BY · PubMed Central
Fig. 17 a –b: Two sagittal views of the cone-beam CT dataset. Potential anchorage for the left (a) and right pterygoid processes (b) is displayed
Fig. 17 a –b: Two sagittal views of the cone-beam CT dataset. Potential anchorage for the left (a) and right pterygoid processes (b) is displayedCC BY · PubMed Central
Fig. 18 a – b: Two views of the virtual plan of the IPS Implants® Preprosthetic. Following extended maxillary ablation, only the pterygoid processes bilaterally allow for safe bony anchorage (a). The framework implant is shown with the two long extensions to the pterygoid processes and the long bar extending to the right lateral skull base along the zygomatic arch (b)
Fig. 18 a – b: Two views of the virtual plan of the IPS Implants® Preprosthetic. Following extended maxillary ablation, only the pterygoid processes bilaterally allow for safe bony anchorage (a). The framework implant is shown with the two long extensions to the pterygoid processes and the long bar extending to the right lateral skull base along the zygomatic arch (b)CC BY · PubMed Central
Fig. 19 a – d: Two views of the IPS Implants® Preprosthetic mounted onto the patient-specific biomodel from above (a) and from the right lateral view (b). (Important to note: the two extensions for anchoring on the two pterygoid processes as well as the long arm extending to the right lateral skull base)
Fig. 19 a – d: Two views of the IPS Implants® Preprosthetic mounted onto the patient-specific biomodel from above (a) and from the right lateral view (b). (Important to note: the two extensions for anchoring on the two pterygoid processes as well as the long arm extending to the right lateral skull base)CC BY · PubMed Central
Fig. 20 free a – e: Intraoperative view with incision made within the previously transplanted lateral upper arm free flap (a), transoral subperiosteal dissection along the lateral midface and right zygomatic arch to preauricular region (b); the provisional non-precious metal bar-supported dental prosthesis in high-water design was photographed intraoperatively from below (c) and screwed onto the IPS Implants® Preprosthetic intraoperatively (d) for better transoral insertion (e). (Please note: a separate preauricular extraoral approach of approximately 4 cm is required for drilling and screwing to enable functionally stable osteosynthesis in the lateral skull base area)
Fig. 20 free a – e: Intraoperative view with incision made within the previously transplanted lateral upper arm free flap (a), transoral subperiosteal dissection along the lateral midface and right zygomatic arch to preauricular region (b); the provisional non-precious metal bar-supported dental prosthesis in high-water design was photographed intraoperatively from below (c) and screwed onto the IPS Implants® Preprosthetic intraoperatively (d) for better transoral insertion (e). (Please note: a separate preauricular extraoral approach of approximately 4 cm is required for drilling and screwing to enable functionally stable osteosynthesis in the lateral skull base area)CC BY · PubMed Central
Fig. 21 Screenshot of intraoperative navigation using the Curve® System (Brainlab, Munich, Germany) at the lateral skull base to validate real-time the available bone stock prior to drilling for screw retention. Screenshot during navigation, displaying the four-field view in three multiplanar perspectives (i.e., axial, coronal, sagittal) and a 3D view
Fig. 21 Screenshot of intraoperative navigation using the Curve® System (Brainlab, Munich, Germany) at the lateral skull base to validate real-time the available bone stock prior to drilling for screw retention. Screenshot during navigation, displaying the four-field view in three multiplanar perspectives (i.e., axial, coronal, sagittal) and a 3D viewCC BY · PubMed Central
Fig. 22 a – d: Four orthopantomograms show the progression of the patient with a metastasized malignant melanoma of the entire maxilla before resection (a), after resection and before microvascular soft tissue reconstruction of the functional subunits postablation using a lateral upper arm free flap (b), after insertion of the IPS Implant® Preprosthetic (c), and at the 1-year follow-up after primary functional stable dental rehabilitation (d)
Fig. 22 a – d: Four orthopantomograms show the progression of the patient with a metastasized malignant melanoma of the entire maxilla before resection (a), after resection and before microvascular soft tissue reconstruction of the functional subunits postablation using a lateral upper arm free flap (b), after insertion of the IPS Implant® Preprosthetic (c), and at the 1-year follow-up after primary functional stable dental rehabilitation (d)CC BY · PubMed Central
Fig. 23 a – g: Three intraoral views (on the left) show the first provisional and screwed dental prosthesis in high-water design (top) and the definitive dental prosthesis in occlusion (middle) and with the vestibular shield (bottom) [Annotation: unfortunately, the temporary dental prosthesis was converted into the definitive dental prosthesis, i.e., not designed to be removable, as strongly recommended by the authors]. Four clinical extraoral corresponding views show the patient definitively provided with dental prosthesis after completion of the surgical and adjuvant treatment (including radiotherapy) with evidence of lip competency and, albeit limited, mouth opening; remarkably, there is significant scarring, particularly in the area of cervical metastasis removal on the left side. The severe pseudo-class III malocclusion is compensated for without the need for bone grafting in the resected upper jaw and midface area
Fig. 23 a – g: Three intraoral views (on the left) show the first provisional and screwed dental prosthesis in high-water design (top) and the definitive dental prosthesis in occlusion (middle) and with the vestibular shield (bottom) [Annotation: unfortunately, the temporary dental prosthesis was converted into the definitive dental prosthesis, i.e., not designed to be removable, as strongly recommended by the authors]. Four clinical extraoral corresponding views show the patient definitively provided with dental prosthesis after completion of the surgical and adjuvant treatment (including radiotherapy) with evidence of lip competency and, albeit limited, mouth opening; remarkably, there is significant scarring, particularly in the area of cervical metastasis removal on the left side. The severe pseudo-class III malocclusion is compensated for without the need for bone grafting in the resected upper jaw and midface areaCC BY · PubMed Central

Verification

Claims the paper makes

2 Valid · 2 Not valid · 7 Not checked · 38 Own results and interpretations

11 more claims

Create a free account to see all 49 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 22
  • Borderline: one of the tests for a substantial claim is unclear. 1
  • Probably not a substantial claim. 18
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 27 references

Metadata

Authors
Gellrich, N.-C., Korn, P., Jehn, P., Lentge, F., Neuhaus, M.-T., & Rahlf, B.
Affiliations
Medizinische Hochschule Hannover (DE)
Corresponding author
Gellrich, Nils-Claudius
Venue
Head & Face Medicine
Published
2025-12-18
Volume
22
Issue
1
Pages
7-7
ISSN
1746-160X (ISSN-L)
OpenAlex
W4417446849
Cited by
2
References
27
Citations by year
2026: 2
FWCI
1.83
Type
journal article
Language
en
Open access
Licence
Locations
  • Head & Face Medicine (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Medizinische Hochschule Hannover (MHH)
Topics
  • Health Sciences › Dentistry › Oral Surgery › Dental Implant Techniques and Outcomes
  • Health Sciences › Medicine › Surgery › Reconstructive Facial Surgery Techniques
  • Health Sciences › Medicine › Surgery › Reconstructive Surgery and Microvascular Techniques
Keywords
subperiosteal implants, patient-specific implants, maxillary defects, midfacial defects, pterygoid process, implant stability, radiotherapy, finite element analysis, dental rehabilitation, mucositis
MeSH terms
Adult, Aged, Feasibility Studies, Female, Humans, Male, Maxilla, Middle Aged, Retrospective Studies, Dental Implants, Treatment Outcome

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Innovative landing zones for one-piece, rigidly fixated patient-specific subperiosteal implants in dental rehabilitation of severe maxillary and midfacial defects. https://app.cochat.ai/papers/10.1186/s13005-025-00549-y
The paper
Gellrich, N.-C., Korn, P., Jehn, P., Lentge, F., Neuhaus, M.-T., & Rahlf, B. (2025). Innovative landing zones for one-piece, rigidly fixated patient-specific subperiosteal implants in dental rehabilitation of severe maxillary and midfacial defects. Head & Face Medicine. https://doi.org/10.1186/s13005-025-00549-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.