CoChat

Quantum annealing-aided design of an ultrathin-metamaterial optical diode

Open access
Kim, Seongmin, Park, Su-Jin, Moon, Seunghyun, Zhang, Qiushi, Hwang, Sanghyo, Kim, Sun-Kyung, Luo, Tengfei, Lee, Eungkyu · 2024 · Nano Convergence

Published version of a preprint

The DOI matches its Crossref record; 46 of the 47 references it cites were found in a registry or an index.

Abstract

Thin-film optical diodes are important elements for miniaturizing photonic systems. However, the design of optical diodes relies on empirical and heuristic approaches. This poses a significant challenge for identifying optimal structural models of optical diodes at given wavelengths. Here, we leverage a quantum annealing-enhanced active learning scheme to automatically identify optimal designs of 130 nm-thick optical diodes. An optical diode is a stratified volume diffractive film discretized into rectangular pixels, where each pixel is assigned to either a metal or dielectric. The proposed scheme identifies the optimal material states of each pixel, maximizing the quality of optical isolation at given wavelengths. Consequently, we successfully identify optimal structures at three specific wavelengths (600, 800, and 1000 nm). In the best-case scenario, when the forward transmissivity is 85%, the backward transmissivity is 0.1%. Electromagnetic field profiles reveal that the designed diode strongly supports surface plasmons coupled across counterintuitive metal–dielectric pixel arrays. Thereby, it yields the transmission of first-order diffracted light with a high amplitude. In contrast, backward transmission has decoupled surface plasmons that redirect Poynting vectors back to the incident medium, resulting in near attenuation of its transmission. In addition, we experimentally verify the optical isolation function of the optical diode.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1186/s40580-024-00425-6

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Schematic of a thin-film optical diode with a stratified volume diffractive film (A) Optical configuration of a thin-film optical diode consisting of medium 1, stratified volume diffractive film, and medium 2. “Forward” (or “Backward”) indicates that the light with a wavelength of {\lambda }_{0} is normally incident toward the diode from medium 1 to medium 2 (or from medium 2 to medium 1). The refractive index of medium 1 (or medium 2) is n1 (or n2), and n2 is higher than n1. x and z denote the directions of the Cartesian coordinates. The red solid lines indicate electromagnetic waves, and “m” depicts the order of diffracted or evanescent light. The black arrows schematically indicate the direction of k-vectors of diffracted or evanescent lights. (B) Schematic illustrating the dispersion relationship between photon energy and in-plane momentum. The blue solid lines indicate the light lines of media 1 and 2. The red dots denote the in-plane momentum of the zeroth-order (m = 0), first-order (m = 1), and second-order (m = 2) diffracted lights. The horizontal black arrow indicates the magnitude of grating momentum ({2\pi /{\Lambda }}_{G})
Fig. 1 Schematic of a thin-film optical diode with a stratified volume diffractive film (A) Optical configuration of a thin-film optical diode consisting of medium 1, stratified volume diffractive film, and medium 2. “Forward” (or “Backward”) indicates that the light with a wavelength of {\lambda }_{0} is normally incident toward the diode from medium 1 to medium 2 (or from medium 2 to medium 1). The refractive index of medium 1 (or medium 2) is n1 (or n2), and n2 is higher than n1. x and z denote the directions of the Cartesian coordinates. The red solid lines indicate electromagnetic waves, and “m” depicts the order of diffracted or evanescent light. The black arrows schematically indicate the direction of k-vectors of diffracted or evanescent lights. (B) Schematic illustrating the dispersion relationship between photon energy and in-plane momentum. The blue solid lines indicate the light lines of media 1 and 2. The red dots denote the in-plane momentum of the zeroth-order (m = 0), first-order (m = 1), and second-order (m = 2) diffracted lights. The horizontal black arrow indicates the magnitude of grating momentum ({2\pi /{\Lambda }}_{G})CC BY · PubMed Central
Fig. 2 Schematic of a pixelated metamaterial structure with the QA-enhanced active learning scheme. (A) Schematic structure of a stratified volume diffractive film used in this study. The cuboid highlighted by black solid lines is a unit cell, which is represented as a pixelated metamaterial structure. Ex and kz denote the electric field and the wave vector of the normal-incident light, respectively. (B) Diagram of the iterative QA-enhanced active learning scheme. The dataset consists of binary vectors (\varvec{x}) and their associated FoMs. The factorization machine trained by the dataset formulates the QUBO matrix. The QA identifies the optimal binary vector (\varvec{x}) based on the QUBO matrix. The FoM of the optimal binary vector is evaluated with RCWA. The optimal binary vector and the FoM are added to the dataset for the next optimization cycle
Fig. 2 Schematic of a pixelated metamaterial structure with the QA-enhanced active learning scheme. (A) Schematic structure of a stratified volume diffractive film used in this study. The cuboid highlighted by black solid lines is a unit cell, which is represented as a pixelated metamaterial structure. Ex and kz denote the electric field and the wave vector of the normal-incident light, respectively. (B) Diagram of the iterative QA-enhanced active learning scheme. The dataset consists of binary vectors (\varvec{x}) and their associated FoMs. The factorization machine trained by the dataset formulates the QUBO matrix. The QA identifies the optimal binary vector (\varvec{x}) based on the QUBO matrix. The FoM of the optimal binary vector is evaluated with RCWA. The optimal binary vector and the FoM are added to the dataset for the next optimization cycleCC BY · PubMed Central
Fig. 3 Benchmark study of QA-enhanced active learning scheme (A) Exhaustive enumeration result of FoM for the case of N = 12 for {{\uplambda }}_{0} = 600 nm. RCWA evaluates all the 4,096 possible configurations. x is represented as a decimal number. The inset is the count-of-FoM distribution. (B) Maximum FoM as a function of optimization cycles with the QA-enhanced active learning scheme. The optimization process starts with five different random initial datasets
Fig. 3 Benchmark study of QA-enhanced active learning scheme (A) Exhaustive enumeration result of FoM for the case of N = 12 for {{\uplambda }}_{0} = 600 nm. RCWA evaluates all the 4,096 possible configurations. x is represented as a decimal number. The inset is the count-of-FoM distribution. (B) Maximum FoM as a function of optimization cycles with the QA-enhanced active learning scheme. The optimization process starts with five different random initial datasetsCC BY · PubMed Central
Fig. 4 Optimized thin-film optical diodes at various target wavelengths (A to C) Maximum FoM as a function of optimization cycles with N = 12, 16, 20, 24, 32, and 40 for target wavelengths of (A) {{\uplambda }}_{0} = 600 nm ({{\Lambda }}_{G} = 450 nm), (B) {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm), and (C) {{\uplambda }}_{0} = 1000 nm ({{\Lambda }}_{G} = 750 nm). (D to I) Electromagnetic field profiles for (D, E, F) forward cases and (G, H, I) backward cases of the optimal optical diodes at (D, G) {{\uplambda }}_{0} = 600 nm ({{\Lambda }}_{G} = 450 nm), (E, H) {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm), and (F, I) {{\uplambda }}_{0} = 1,000 nm ({{\Lambda }}_{G} = 750 nm). The black arrow indicates the Poynting vector at the given spatial point. The length of the arrow is on a logarithmic scale. Normalized {\text{E}}_{z} depicts the z-component of the electric field, normalized by its maximum. The solid black lines indicate the material boundaries
Fig. 4 Optimized thin-film optical diodes at various target wavelengths (A to C) Maximum FoM as a function of optimization cycles with N = 12, 16, 20, 24, 32, and 40 for target wavelengths of (A) {{\uplambda }}_{0} = 600 nm ({{\Lambda }}_{G} = 450 nm), (B) {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm), and (C) {{\uplambda }}_{0} = 1000 nm ({{\Lambda }}_{G} = 750 nm). (D to I) Electromagnetic field profiles for (D, E, F) forward cases and (G, H, I) backward cases of the optimal optical diodes at (D, G) {{\uplambda }}_{0} = 600 nm ({{\Lambda }}_{G} = 450 nm), (E, H) {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm), and (F, I) {{\uplambda }}_{0} = 1,000 nm ({{\Lambda }}_{G} = 750 nm). The black arrow indicates the Poynting vector at the given spatial point. The length of the arrow is on a logarithmic scale. Normalized {\text{E}}_{z} depicts the z-component of the electric field, normalized by its maximum. The solid black lines indicate the material boundariesCC BY · PubMed Central
Fig. 5 Experimental verification of the designed thin-film optical diode. (A) Selected optical diode with an FoM of 0.86 for the target wavelength of {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm) at N = 16. (B) Schematic of the fabrication process of the selected optical diode with electron-beam (E-beam) lithography. (C) (Left) Optical microscope image of the thin-film optical diode 4 × 3 array on a quartz substrate. (Middle) Cross-sectional transmission electron microscope (TEM) image of the diode. (Right) Cross-sectional energy-dispersive X-ray analysis image of the cross-section for the TEM image. (D) Schematic of an experimental system for characterizing transmissivities of the fabricated optical diode. (E, F) Measured forward and backward transmissivities of the optical diodes array at (E) {{\uplambda }}_{0} = 800 nm and (F) {{\uplambda }}_{0} = 1000 nm
Fig. 5 Experimental verification of the designed thin-film optical diode. (A) Selected optical diode with an FoM of 0.86 for the target wavelength of {{\uplambda }}_{0} = 800 nm ({{\Lambda }}_{G} = 600 nm) at N = 16. (B) Schematic of the fabrication process of the selected optical diode with electron-beam (E-beam) lithography. (C) (Left) Optical microscope image of the thin-film optical diode 4 × 3 array on a quartz substrate. (Middle) Cross-sectional transmission electron microscope (TEM) image of the diode. (Right) Cross-sectional energy-dispersive X-ray analysis image of the cross-section for the TEM image. (D) Schematic of an experimental system for characterizing transmissivities of the fabricated optical diode. (E, F) Measured forward and backward transmissivities of the optical diodes array at (E) {{\uplambda }}_{0} = 800 nm and (F) {{\uplambda }}_{0} = 1000 nmCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 46 references

Research works printed but not linked: 2

  1. R. Hu, S. Iwamoto, L. Feng, S. Ju, S. Hu, M. Ohnishi, N. Nagai, K. Hirakawa, J. Shiomi, Phys. Rev. X. 10, 021050 (2020)
  2. B. Zhou, F. Gao, J. Pan, S. Shen, 2020 IEEE International Conference on Robotics and Automation (ICRA), 1208–1214 (2020)

Cited by

See all 20

Metadata

Authors
Kim, S., Park, S.-J., Moon, S., Zhang, Q., Hwang, S., Kim, S.-K., Luo, T., & Lee, E.
Affiliations
  • University of Notre Dame (US)
  • Kyung Hee University (KR)
Corresponding author
  • Kim, Sun-Kyung
  • Luo, Tengfei
  • Lee, Eungkyu
Venue
Nano Convergence
Published
2024-05-09
Volume
11
Issue
1
Pages
16-16
ISSN
2196-5404 (ISSN-L)
OpenAlex
W4396764670
Cited by
20
References
47
Citations by year
2026: 4 · 2025: 10 · 2024: 6
FWCI
1.56
Type
journal article
Language
en
Open access
Licence
Locations
  • Nano Convergence (publishedVersion, cc-by)
  • Research Square (acceptedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • National Research Foundation of Korea (RS-2023-00255442, RS-2023-00207966)
  • The U.S. Department of Energy (DE-AC05-00OR22725)
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › Optical Coatings and Gratings
Keywords
optical isolator, quantum annealing, active learning (machine learning), metamaterial design, ultrathin films, optical isolation, surface plasmons, automated design optimization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Quantum annealing-aided design of an ultrathin-metamaterial optical diode. https://app.cochat.ai/papers/10.1186/s40580-024-00425-6
The paper
Kim, S., Park, S.-J., Moon, S., Zhang, Q., Hwang, S., Kim, S.-K., Luo, T., & Lee, E. (2024). Quantum annealing-aided design of an ultrathin-metamaterial optical diode. Nano Convergence. https://doi.org/10.1186/s40580-024-00425-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.