Effect of feedstock and microwave pyrolysis temperature on physio-chemical and nano-scale mechanical properties of biochar
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Biochars were produced from softwood chips (spruce–fir mix) and hemp stalk biomasses in an in-house-developed microwave pyrolysis reactor. A kilogram batch raw biomass mixed with 10 wt% microwave absorber was pyrolyzed at 60-min residence time. Microwave power levels were set at 2100, 2400, and 2700 W with optimum heating rates ranging 25–50 °C/min. The proximate analysis indicated a progressive gain in biochar carbon content with power level increase. Both biochars showed a H:C ratio of < 1.2 with a graphite-like structure, which is an important observation for their potential use as a filler in bio-composites structural strength increase. Fourier Transfer Infrared (FT-IR) spectra showed a major loss of functional groups as the power level increased. Brunauer–Emmett–Teller (BET) surface area and porosity distribution contained higher volume of smaller pores in the hemp biochar. The char hardness and Young’s modulus, obtained via nanoindentation technique and load–depth curve analysis, indicated that hemp biochar possessed a higher Young’s modulus and lower hardness than softwood chip biochar.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Cited by
Biochar in Water and Wastewater Treatment—A Sustainability Assessment
Kamali, M., Appels, L., Kwon, E. E., Aminabhavi, T. M., & Dewil, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129946 · Cited by 226
Nzediegwu, C., Arshad, M., Ulah, A., Naeth, M. A., & Chang, S. X. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124282 · Cited by 154
Kumar Mishra, R., Singh, B., & Acharya, B. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100228 · Cited by 132
Emerging applications of biochar: A review on techno-environmental-economic aspects
Zhu, H., An, Q., Syafika Mohd Nasir, A., Babin, A., Lucero Saucedo, S., Vallenas, A., Li, L., Baldwin, S. A., Lau, A., & Bi, X. (2023) · Bioresource Technology · doi:10.1016/j.biortech.2023.129745 · Cited by 93
Marrot, L., Candelier, K., Valette, J., Lanvin, C., Horvat, B., Legan, L., & DeVallance, D. B. (2022) · Waste and Biomass Valorization · doi:10.1007/s12649-021-01640-6 · Cited by 66
Metadata
- Authors
- Wallace, C. A., Afzal, M. T., & Saha, G. C.
- Venue
- Bioresources and Bioprocessing
- Published
- 2019-09-13
- Volume
- 6
- Issue
- 1
- ISSN
- 2197-4365 (ISSN-L)
- OpenAlex
- W2973201497
- Cited by
- 124
- References
- 1
- FWCI
- 2.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of feedstock and microwave pyrolysis temperature on physio-chemical and nano-scale mechanical properties of biochar. https://app.cochat.ai/papers/10.1186/s40643-019-0268-2
- The paper
- Wallace, C. A., Afzal, M. T., & Saha, G. C. (2019). Effect of feedstock and microwave pyrolysis temperature on physio-chemical and nano-scale mechanical properties of biochar. Bioresources and Bioprocessing. https://doi.org/10.1186/s40643-019-0268-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.