The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Estimation of fracture parameters from reflection seismic data—Part II: Fractured models with orthorhombic symmetry
Abstract
Existing geophysical and geological data indicate that orthorhombic media with a horizontal symmetry plane should be rather common for naturally fractured reservoirs. Here, we consider two orthorhombic models: one that contains parallel vertical fractures embedded in a transversely isotropic background with a vertical symmetry axis (VTI medium) and the other formed by two orthogonal sets of rotationally invariant vertical fractures in a purely isotropic host rock. Using the linear-slip theory, we obtain simple analytic expressions for the anisotropic coefficients of effective orthorhombic media. Under the assumptions of weak anisotropy of the background medium (for the first model) and small compliances of the fractures, all effective anisotropic parameters reduce to the sum of the background values and the parameters associated with each fracture set. For the model with a single fracture system, this result allows us to eliminate the influence of the VTI background by evaluating the differences between the anisotropic parameters defined in the vertical symmetry planes. Subsequently, the fracture weaknesses, which carry information about the density and content of the fracture network, can be estimated in the same way as for fracture-induced transverse isotropy with a horizontal symmetry axis (HTI media) examined in our previous paper (part I). The parameter estimation procedure can be based on the azimuthally dependent reflection traveltimes and prestack amplitudes of P-waves alone if an estimate of the ratio of the P- and S-wave vertical velocities is available. It is beneficial, however, to combine P-wave data with the vertical traveltimes, NMO velocities, or AVO gradients of mode-converted (PS) waves. In each vertical symmetry plane of the model with two orthogonal fracture sets, the anisotropic parameters are largely governed by the weaknesses of the fractures orthogonal to this plane. For weak anisotropy, the fracture sets are essentially decoupled, and their parameters can be estimated by means of two independently performed HTI inversions. The input data for this model must include the vertical velocities (or reflector depth) to resolve the anisotropic coefficients in each vertical symmetry plane rather than just their differences. We also discuss several criteria that can be used to distinguish between the models with one and two fracture sets. For example, the semimajor axis of the P-wave NMO ellipse and the polarization direction of the vertically traveling fast shear wave are always parallel to each other for a single system of fractures, but they may become orthogonal in the medium with two fracture sets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elastic moduli of a cracked solid
Budiansky, B., & O'connell, R. J. (1976) · International Journal of Solids and Structures · doi:10.1016/0020-7683(76)90044-5 · Cited by 2,015
ELASTIC WAVE PROPAGATION IN MEDIA WITH PARALLEL FRACTURES AND ALIGNED CRACKS1
SCHOENBERG, M., & DOUMA, J. (1988) · Geophysical Prospecting · doi:10.1111/j.1365-2478.1988.tb02181.x · Cited by 529
Transmission of seismic waves across single natural fractures
(1991) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(91)92362-3 · Cited by 475
Anisotropy in seismic velocities and amplitudes from multiple parallel fractures
Pyrak‐Nolte, L. J., Myer, L. R., & Cook, N. G. W. (1990) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb095ib07p11345 · Cited by 273
Azimuth-dependent turning of seismic waves reflected from fractured reservoirs
Schoenberg, M. A., Dean, S., & Sayers, C. M. (1999) · Geophysics · doi:10.1190/1.1444623 · Cited by 48
Cited by
Laubach, S. E., Lander, R. H., Criscenti, L. J., Anovitz, L. M., Urai, J. L., Pollyea, R. M., Hooker, J. N., Narr, W., Evans, M. A., Kerisit, S. N., et al. (2019) · Reviews of Geophysics · doi:10.1029/2019rg000671 · Cited by 349
Metadata
- Authors
- Bakulin, A., Grechka, V., & Tsvankin, I.
- Venue
- Geophysics
- Publisher
- Society of Exploration Geophysicists
- Published
- 2000-01-01
- Volume
- 65
- Issue
- 6
- Pages
- 1803-1817
- ISSN
- 0016-8033 (ISSN-L)
- 1942-2156
- OpenAlex
- W2127290265
- Cited by
- 270
- References
- 5
- FWCI
- 5.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Estimation of fracture parameters from reflection seismic data—Part II: Fractured models with orthorhombic symmetry. https://app.cochat.ai/papers/10.1190/1.1444864
- The paper
- Bakulin, A., Grechka, V., & Tsvankin, I. (2000). Estimation of fracture parameters from reflection seismic data—Part II: Fractured models with orthorhombic symmetry. Geophysics. https://doi.org/10.1190/1.1444864
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.