The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Manufacturing of Polymer Composites
Open accessAbstract
The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fracture mechanics studies of crack healing and welding of polymers
Jud, K., Kausch, H. H., & Williams, J. G. (1981) · Journal of Materials Science · doi:10.1007/bf00552073 · Cited by 595
Effects of hole machining defects on strength and fatigue life of composite laminates
Persson, E., Eriksson, I., & Zackrisson, L. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(96)00106-6 · Cited by 288
Machining of composite materials. Part I: Traditional methods
Abrate, S., & walton, D. (1992) · Composites Manufacturing · doi:10.1016/0956-7143(92)90119-f · Cited by 147
Quality Assurance and Quality Control
Klesta, E. J., & Bartz, J. K. (1996) · Soil Science Society of America book series · doi:10.2136/sssabookser5.3.c2 · Cited by 97
Morphology of binary linear polyethylene blends
LOPEZ, J., & Gedde, U. W. (1988) · Polymer · doi:10.1016/0032-3861(88)90012-2 · Cited by 32
Cited by
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
A self-healing thermosetting composite material
Hayes, S. A., Jones, F. R., Marshiya, K., & Zhang, W. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2006.06.008 · Cited by 293
Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation
Phadnis, V. A., Makhdum, F., Roy, A., & Silberschmidt, V. V. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.11.020 · Cited by 290
Zhuo, P., Li, S., Ashcroft, I. A., & Jones, A. I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109143 · Cited by 282
A review of bast fibres and their composites. Part 2 – Composites
Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.020 · Cited by 274
Metadata
- Authors
- Åström, B. T.
- Venue
- Routledge eBooks
- Publisher
- Routledge
- Published
- 2018-04-27
- OpenAlex
- W597346639
- Cited by
- 375
- References
- 5
- Type
- reference entry
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.