The DOI matches its Crossref record.
Electrical Contacts
Abstract
Preface to the Second Edition Preface to the First Edition Introduction Editor Contributors Contact Interface Conduction Electrical Contact Resistance: Fundamental Principles Roland S. Timsit Introduction Electrical Constriction Resistance Effect of Surface Films on Constriction and Contact Resistance Temperature of an Electrically Heated a-Spot Mechanics of a-Spot Formation Breakdown of Classical Electrical Contact Theory in Small Contact Spots Constriction Resistance at High Frequencies Summary Acknowledgements References Introduction to Contact Tarnishing and Corrosion Paul G. Slade Introduction Corrosion Rates Corrosion Gases Types of Corrosion Gas Concentrations in the Atmosphere Measurements Mixed Flow Gas Laboratory Testing Electronic Connectors Power Connectors Other Considerations Acknowledgements References Gas Corrosion William H. Abbott and Paul G. Slade Introduction The Field Environments for Electrical Contacts Laboratory Accelerated Testing Lubrication and Inhibition of Corrosion Acknowledgement References Effect of Dust Contamination on Electrical Contacts Ji Gao Zhang Introduction Dusty Environment and Dust Composition The Characteristics of Dust Particles Application Conditions in Dusty Environment Theoretical Analysis of Connector Contact Failure due to the Dust Future Work References Nonarcing Contacts Power Connectors Milenko Braunovic Introduction Types of Power Connectors Properties of Conductor and Connector Materials Parameters Affecting Performance of Power Connections Palliative Measures Connector Degradation Prognostic Models Shape-Memory Alloys (SMA) Metal Foam Materials Installation of Power Connections Accelerated Current-Cycling Tests (Standards) References Low-Power Commercial, Automotive, and Appliance Connections Anthony Lee and George Drew Introduction Connectors Contact Terminals Degradation of Connector Contact Automotive Connector Contacts Summary References Tribology of Electronic Connectors: Contact Sliding Wear, Fretting, and Lubrication Roland S. Timsit and Morton Antler Introduction Sliding Wear Fretting Lubrication References Materials, Coatings, and Platings Morton Antler and Paul G. Slade Introduction Metallic Finishes Properties Related to Porosity Metallurgical and Structural Properties Physical and Mechanical Properties Acknowledgement References The Electric Arc and Switching Device Technology The Arc and Interruption Paul G. Slade Introduction The Fourth State of Matter Establishing an Arc The Formation of the Electric Arc The Arc in Air at Atmospheric Pressure The Arc in Vacuum Arc Interruption Acknowledgements References The Consequences of Arcing Paul G. Slade Introduction Arcing Time Arc Erosion of Electrical Contacts Blow-Off Force Contact Welding Changes in the Contact Surface as a Result of Arcing Acknowledgements References Reed Switches Kunio Hinohara Principles and Design of the Reed Switch Recommended Contact Plating Contact Surface Degradation and Countermeasures Applications of Reed Switches References Low Current and High Frequency Miniature Switches: Microelectromechanical Systems (MEMS) Metal Contact Switches Benjamin F. Toler, Ronald A. Coutu, Jr., and John W. McBride Introduction Micro-Contact Resistance Modeling Contact Materials for Performance and Reliability Failure Modes and Reliability Conclusion References Low Current Switching John W. McBride Introduction and Device Classification Device Types Design Parameters for Static Switching Contacts Mechanical Design Parameters The Measurement of Contact Wear and Contact Dynamics Electrical Characteristics of Low-Current Switching Devices at Opening Electrical Characteristics of Low-Current Switching Devices at Closure Summary Acknowledgements References Medium to High Current Switching: Low Voltage Contractors and Circuit Breakers, and Vacuum Interrupters Manfred Lindmayer General Aspects of Switching in Air Contacts for Switching in Air Low-Voltage Contactors Low-Voltage Circuit-Breakers and Miniature Circuit-Breakers Simulations of Low-Voltage Switching Devices Vacuum Interrupters References Arc Faults and Electrical Safety John J. Shea Introduction Arc Fault Circuit Interrupters (AFCIs) Arcing Faults Glowing Connections Arcing Fault Properties Other Types of Arcing Faults Conclusions References Arcing Contact Materials Arcing Contact Materials Gerald J. Witter Introduction Silver Metal Oxides Silver Refractory Metals Vacuum Interrupter Materials Tungsten Contacts Non-Noble Silver Alloys Silver-Nickel Contact Materials Silver Alloys and Noble Metals Silver-Graphite Contact Materials Conclusion Acknowledgements References Contact Design and Attachment Gerald J. Witter and Guenther Horn Introduction Staked Contact Assembly Designs Welded Contact Assembly Designs Brazed Contact Assembly Designs Clad Metals, Inlay, and Edge Lay Contact Alloys for Non-Arcing Separable Contacts Acknowledgements References Electrical Contact Material Testing Design and Measurement Gerald J. Witter and Werner R
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Automotive battery pack manufacturing – a review of battery to tab joining
Zwicker, M. F. R., Moghadam, M., Zhang, W., & Nielsen, C. V. (2020) · Journal of Advanced Joining Processes · doi:10.1016/j.jajp.2020.100017 · Cited by 275
Combinatorial investigation of Al–Cu intermetallics using small-scale mechanical testing
Xiao, Y., Besharatloo, H., Gan, B., Maeder, X., Spolenak, R., & Wheeler, J. M. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153536 · Cited by 53
Characterization of Intermetallic Compounds in Al-Cu-Bimetallic Interfaces
Pfeifer, S., Großmann, S., Freudenberger, R., Willing, H., & Kappl, H. (2012) · 2012 IEEE 58th Holm Conference on Electrical Contacts (Holm) · doi:10.1109/holm.2012.6336554 · Cited by 30
Metadata
- Venue
- CRC Press eBooks
- Publisher
- CRC Press
- Published
- 1999-03-31
- OpenAlex
- W1512932400
- Cited by
- 727
- References
- 0
- FWCI
- 14.44
- Type
- book
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrical Contacts. https://app.cochat.ai/papers/10.1201/9780585139319
- The paper
- Electrical Contacts. (1999). CRC Press eBooks. https://doi.org/10.1201/9780585139319
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.