Handbook of Elastomers
The DOI matches its Crossref record.
Abstract
Guayule rubber Hevea natural rubber modified natural rubber chemical modification of synthetic elastomers liquid rubber powdered rubber rubber-rubber blends - part 1 rubber-rubber blends - part 2, new developments short fibre-filled rubber composites thermoplastic styrenic block copolymers polyester thermoplastic elastomers - part 1 polyester thermoplastic elastomers - part thermoplastic polyurethane elastomers thermoplastic polyamide elastomers ionomeric thermoplastic elastomers miscellaneous thermoplastic elastomers halogen containing elastomer tetrafluoro ethylene-propylene rubber carboxylated rubber polyphosphazene elastomers advances in silicon rubber technology - part 1, 1944-1986 advances in silicon rubber technology - part 2, current trends acrylic-based elastomer poly(propylene oxide) elastomer polyalkenylenes polytetrahydrofuran crosslinked polyethylene millable polyurethane elastomers cast polyurethane elastomers polynorbornene rubber nitrile and hydrogenated nitrile rubber diene-based elastomer recycling rubber EPDM rubber technology isobutylene-based elastomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These two types of BCPs were firstly developed by Holden and Milkovich through living anionic polymerization in the early 1960s [86].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [86]
Citations
Cites
Still being checked.
Cited by
A highly stretchable autonomous self-healing elastomer
Li, C.-H., Wang, C., Keplinger, C., Zuo, J.-L., Jin, L., Sun, Y., Zheng, P., Cao, Y., Lissel, F., Linder, C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2492 · Cited by 1,496
Photon upconversion based on sensitized triplet–triplet annihilation
Singh-Rachford, T. N., & Castellano, F. N. (2010) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2010.01.003 · Cited by 1,471
Kurtz, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00053-8 · Cited by 847
Recent developments on nanocellulose reinforced polymer nanocomposites: A review
Kargarzadeh, H., Mariano, M., Huang, J., Lin, N., Ahmad, I., Dufresne, A., & Thomas, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.043 · Cited by 673
Block Copolymers: Synthesis, Self-Assembly, and Applications
Feng, H., Lu, X., Wang, W., Kang, N.-G., & Mays, J. (2017) · Polymers · doi:10.3390/polym9100494 · Cited by 467
“These two types of BCPs were firstly developed by Holden and Milkovich through living anionic polymerization in the early 1960s [86].”
BackgroundWang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Advanced silica/polymer composites: Materials and applications
Lee, D. W., & Yoo, B. R. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.04.016 · Cited by 267
Soft Bioelectronics Based on Nanomaterials
Cho, K. W., Sunwoo, S.-H., Hong, Y. J., Koo, J. H., Kim, J. H., Baik, S., Hyeon, T., & Kim, D.-H. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00531 · Cited by 244
Mechanical characterisation of polyurethane elastomer for biomedical applications
Kanyanta, V., & Ivankovic, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.03.005 · Cited by 179
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Kader, M. A., & Bhowmick, A. K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00292-6 · Cited by 142
Das, S., Yılgör, İ., Yılgör, E., İnci, B., Tezgel, Ö., Beyer, F. L., & Wilkes, G. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.10.029 · Cited by 134
Li, C., Yang, H., Suo, Z., & Tang, J. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.103751 · Cited by 135
Zhang, G., Wang, F., Dai, J., & Huang, Z. (2016) · Materials · doi:10.3390/ma9020092 · Cited by 138
George, S. C., Ninan, K. N., Groeninckx, G., & Thomas, S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001107)78:6 · Cited by 108
Natural rubber as a renewable and sustainable bio-modifier for pavement applications: A review
Ansari, A. H., Jakarni, F. M., Muniandy, R., Hassim, S., & Elahi, Z. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125727 · Cited by 102
Mechanistic approach to the curing of carboxylated nitrile rubber (XNBR) by zinc peroxide/zinc oxide
Ibarra, L., Marcos-Fernández, Á. A., & Alzorriz, M. (2002) · Polymer · doi:10.1016/s0032-3861(01)00734-0 · Cited by 100
Entanglements and Fracture in Polymers
Kang, T., Dai, J., Huang, Y., Kim, H., Keten, S., & Kim, J. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00459 · Cited by 98
Yuan, Q., Zhou, T., Li, L., Zhang, J., Liu, X., Ke, X., & Zhang, A. (2015) · RSC Advances · doi:10.1039/c5ra03984c · Cited by 90
Ahmed, W. K., Siraj, S., & Al-Marzouqi, A. H. (2020) · Polymers · doi:10.3390/polym12112579 · Cited by 89
Banerjee, S. S., & Bhowmick, A. K. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.001 · Cited by 84
McGuire, T. M., Pérale, C., Castaing, R., Kociok-Köhn, G. I., & Buchard, A. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06259 · Cited by 81
Sencadas, V., Tawk, C., & Alıcı, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b21739 · Cited by 82
Maji, P. K., Guchhait, P. K., & Bhowmick, A. K. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3827-7 · Cited by 75
Cruz‐Morales, J. A., Gutiérrez-Flores, C., Zárate-Saldaña, D., Burelo, M., García-Ortega, H., & Gutiérrez, S. (2023) · Polymers · doi:10.3390/polym15204074 · Cited by 65
Morphology, morphology development and mechanical properties of polystyrene/polybutadiene blends
Joseph, S., & Thomas, S. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(02)00180-5 · Cited by 65
Modified silicone rubber for use as high voltage outdoor insulators
Ehsani, M., Borsi, H., Gockenbach, E., Bakhshandeh, G. R., & Morshedian, J. (2005) · Advances in Polymer Technology · doi:10.1002/adv.20027 · Cited by 64
Zhao, X., Ji, K., Koelling, K. W., Cornish, K., & Vodovotz, Y. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100348 · Cited by 63
Joseph, A., Mathai, A. E., & Thomas, S. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(03)00175-3 · Cited by 63
Das, S., Yılgör, İ., Yılgör, E., & Wilkes, G. L. (2007) · Polymer · doi:10.1016/j.polymer.2007.10.046 · Cited by 61
Transport of substituted benzenes through nitrile rubber/natural rubber blend membranes
Mathai, A. E., Singh, R. P., & Thomas, S. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00700-1 · Cited by 61
Synthesis, characterisation and properties of clay and silica based rubber nanocomposites
Bandyopadhyay, A., Maiti, M., & Bhowmick, A. K. (2006) · Materials Science and Technology · doi:10.1179/174328406x101265 · Cited by 58
New composites for neutron radiation shielding
Cataldo, F., & Prata, M. (2019) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1007/s10967-019-06526-5 · Cited by 57
Ethylene–Propylene–Silsesquioxane Thermoplastic Elastomers
Seurer, B., & Coughlin, E. B. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800065 · Cited by 56
George, J. J., Bandyopadhyay, A., & Bhowmick, A. K. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.25067 · Cited by 55
Romero-Sánchez, M. D., Pastor‐Blas, M. M., & Martín‐Martínez, J. M. (2003) · International Journal of Adhesion and Adhesives · doi:10.1016/s0143-7496(02)00081-7 · Cited by 55
Pramanik, M., Srivastava, S. K., Samantaray, B. K., & Bhowmick, A. K. (2003) · Macromolecular Research · doi:10.1007/bf03218362 · Cited by 54
Luna, C. B. B., Araújo, E. M., Siqueira, D. D., Morais, D. D. D. S., Filho, E. A. D. S., & Fook, M. V. L. (2019) · Journal of Elastomers & Plastics · doi:10.1177/0095244318819213 · Cited by 53
Effect of silane-modification of diatomite on its composites with thermoplastic polyurethane
Kucuk, F., Şişmanoğlu, S., Kanbur, Y., & Tayfun, Ü. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2020.123683 · Cited by 52
Natural rubber (NR) biosynthesis: perspectives from polymer chemistry
Puskas, J. E., Chiang, K., & Barkakaty, B. (2014) · Elsevier eBooks · doi:10.1533/9780857096913.1.30 · Cited by 52
Dutta, B. K., & Sikdar, S. K. (1999) · Environmental Science & Technology · doi:10.1021/es980689w · Cited by 52
Transport studies of thermoplastic polyurethane/natural rubber (TPU/NR) blends
Minnath, M. A., Unnikrishnan, G. P., & Purushothaman, E. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.06.006 · Cited by 51
Saha, S., & Bhowmick, A. K. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47457 · Cited by 51
The mechanical behavior of composite corrugated core coated with elastomer for morphing skins
Dayyani, I., Ziaei‐Rad, S., & Friswell, M. I. (2013) · Journal of Composite Materials · doi:10.1177/0021998313488807 · Cited by 51
Pandey, K. N., Setua, D. K., & Mathur, G. N. (2002) · Polymer Testing · doi:10.1016/s0142-9418(02)00112-5 · Cited by 49
Halder, K. K., Sonker, R. K., Sachdev, V. K., Tomar, M., & Gupta, V. (2018) · Integrated ferroelectrics · doi:10.1080/10584587.2018.1514879 · Cited by 47
Physical and Mechanical Properties of Chicken Feather Materials
Kock, J. W. (2006) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 47
Kopal, I., Harničárová, M., Valíček, J., & Kušnerová, M. (2017) · Polymers · doi:10.3390/polym9100519 · Cited by 47
Zhao, X., Cornish, K., & Vodovotz, Y. (2019) · Polymers · doi:10.3390/polym11030565 · Cited by 46
Mohammadi, A., Barikani, M., & Lakouraj, M. M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.064 · Cited by 47
Properties of cup lump rubber modified asphalt binder
Azahar, N. M., Hassan, N. A., Jaya, R. P., Hainin, . R., Yusoff, N. I. M., Kamaruddin, N. H. M., Yunus, N. Z. M., Hassan, S. A., & Yaacob, H. (2019) · Road Materials and Pavement Design · doi:10.1080/14680629.2019.1687007 · Cited by 45
White, C. C., Tan, K. T., Hunston, D. L., Nguyen, T., Benatti, D. J., Stanley, D. L., & Chin, J. W. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.03.003 · Cited by 45
The design of a coated composite corrugated skin for the camber morphing airfoil
Dayyani, I., Khodaparast, H. H., Woods, B. K. S., & Friswell, M. I. (2014) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x14544151 · Cited by 43
Naik, A. D., Bourbigot, S., Bellayer, S., Touati, N., Tayeb, K. B., Vezin, H., & Fontaine, G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07323 · Cited by 43
Sustainable Myrcene-Based Elastomers via a Convenient Anionic Polymerization
Lamparelli, D. H., Kleybolte, M. M., Winnacker, M., & Capacchione, C. (2021) · Polymers · doi:10.3390/polym13050838 · Cited by 43
Dielectric properties of flame resistant EPDM composites
Canaud, C., Visconte, L. L. Y., Sens, M. A., & Nunes, R. C. R. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00124-5 · Cited by 41
Medicated Chewing Gums (MCGs): Composition, Production, and Mechanical Testing
Hagbani, T. A., & Nazzal, S. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1123-z · Cited by 48
Zhao, X., Venoor, V., Koelling, K. W., Cornish, K., & Vodovotz, Y. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47334 · Cited by 39
Kopal, I., Harničárová, M., Valíček, J., Krmela, J., & Lukáč, O. (2019) · Polymers · doi:10.3390/polym11061074 · Cited by 41
Kang, J., Kim, J., Choi, K., Hong, P. H., Park, H. J., Kim, K., Kim, Y. K., Moon, G., Jeon, H., Lee, S., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127636 · Cited by 40
Free-Radical Photopolymerization of Acrylonitrile Grafted onto Epoxidized Natural Rubber
Whba, R., Su’ait, M. S., Lee, T. K., Ibrahim, S., Mohamed, N. S., & Ahmad, A. (2021) · Polymers · doi:10.3390/polym13040660 · Cited by 39
Almasi, A., Baghani, M., & Moallemi, A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.06.033 · Cited by 38
Saha, T., Bhowmick, A. K., Oda, T., Miyauchi, T., & Fujii, N. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.03.084 · Cited by 38
Romero-Sánchez, M. D., Pastor‐Blas, M. M., Martín‐Martínez, J. M., Zhdan, P. A., & Watts, J. F. (2001) · Journal of Materials Science · doi:10.1023/a:1012999820592 · Cited by 38
Rungswang, W., Kotaki, M., Shimojima, T., Kimura, G., Sakurai, S., & Chirachanchai, S. (2010) · Polymer · doi:10.1016/j.polymer.2010.12.019 · Cited by 38
Fluorine containing phosphazene polymers
Gleria, M., Bertani, R., Jaeger, R. D., & Lora, S. (2003) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2003.07.015 · Cited by 38
Gopanna, A., Thomas, S. P., Rajan, K. P., Rajan, R., Rainosalo, E., Zavašnik, J., & Chavali, M. S. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.09.030 · Cited by 36
Azura, A. R., & Leow, S. L. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.512 · Cited by 36
Uthaipan, N., Jarnthong, M., Peng, Z., Junhasavasdikul, B., Nakason, C., & Thitithammawong, A. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.099 · Cited by 35
Design and Synthesis of Multigraft Copolymer Thermoplastic Elastomers: Superelastomers
Wang, H., Lu, W., Wang, W., Shah, P. N., Misichronis, K., Kang, N., & Mays, J. W. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700254 · Cited by 35
Mohammadi, A., Barikani, M., & Barmar, M. (2013) · Polymers for Advanced Technologies · doi:10.1002/pat.3173 · Cited by 35
A finite element analysis of orthogonal rubber cutting
Jun, Y., & Strenkowski, J. S. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.02.265 · Cited by 34
Johnson, T., & Thomas, S. (1999) · Journal of Materials Science · doi:10.1023/a:1004638024590 · Cited by 33
Lichtenberg, C., Spaniol, T. P., Peckermann, I., Hanusa, T. P., & Okuda, J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja310112e · Cited by 33
Unsal, E., Yalcin, B., Yılgör, İ., Yılgör, E., & Cakmak, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.07.041 · Cited by 32
Verma, A., & Singh, V. K. (2016) · Journal of Material Science & Engineering · doi:10.4172/2169-0022.1000242 · Cited by 32
Ali, M. A. M., El‐Nemr, K. F., & Hassan, M. M. (2011) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411407949 · Cited by 31
Liu, H., Liang, X., & Nakajima, K. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ab948a · Cited by 31
Material Properties of Plastics
Klein, D.-I. R. (2011) · Wiley eBooks · doi:10.1002/9783527636969.ch1 · Cited by 29
Shape Memory Materials from Rubbers
Reghunadhan, A., Paduvilan, J. K., Kaliyathan, A. V., Velayudhan, P., Strankowski, M., & Thomas, S. (2021) · Materials · doi:10.3390/ma14237216 · Cited by 29
Morphology–Property Relationship in Rubber-Based Nanocomposites: Some Recent Developments
Bhowmick, A. K., Bhattacharya, M., Mitra, S., Kumar, K. D., Maji, P. K., Choudhury, A. R., George, J. J., & Basak, G. C. (2010) · Advances in polymer science · doi:10.1007/12_2010_95 · Cited by 37
Hysteretic damping in XNBR – MWNT nanocomposites at low and high compressive strains
Sasikumar, K., Manoj, N. R., Mukundan, T., & Khastgir, D. K. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.04.005 · Cited by 29
Chen, B., Fenimore, L. M., Chen, Y., Barbon, S. M., Brown, H. A., Auyeung, E., Shan, C. L. P., & Torkelson, J. M. (2023) · Polymer Chemistry · doi:10.1039/d3py00444a · Cited by 28
Fluoroelastomer Copolymers Incorporating Polyhedral Oligomeric Silsesquioxane
Seurer, B., & Coughlin, E. B. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800220 · Cited by 28
Kuki, Á., Nagy, L., Memboeuf, A., Drahos, L., Vékey, K., Zsuga, M., & Kéki, S. (2010) · Journal of the American Society for Mass Spectrometry · doi:10.1016/j.jasms.2010.06.013 · Cited by 28
Thermal characterization of oil extracted from ethylene–propylene–diene terpolymer residues (EPDM-r)
Pistor, V., Ornaghi, F. G., Fiório, R., & Zattera, A. J. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.06.028 · Cited by 28
Multiscale Modeling of the Morphology and Properties of Segmented Silicone-Urea Copolymers
Yıldırım, E., Yurtsever, M., Yurtsever, E., Yılgör, İ., & Yılgör, E. (2011) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-011-9588-1 · Cited by 28
Prediction of properties of rubber by using artificial neural networks
Vijayabaskar, V., Gupta, R. K., Chakrabarti, P. P., & Bhowmick, A. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22356 · Cited by 28
Recent advances in the 3D printing of ionic electroactive polymers and core ionomeric materials
Engel, K. E., Kilmartin, P. A., & Diegel, O. (2021) · Polymer Chemistry · doi:10.1039/d1py01297e · Cited by 28
Sarma, A. D., Padmanathan, H. R., Saha, S., Banerjee, S. S., & Bhowmick, A. K. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45353 · Cited by 27
Moustafa, H., & Darwish, N. A. (2015) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2015.05.002 · Cited by 27
Allcock, H. R., Bender, J. D., Morford, R. V., & Berda, E. B. (2003) · Macromolecules · doi:10.1021/ma0217478 · Cited by 27
Surface characteristics of UV-irradiated chitin-based polyurethane elastomers
Zia, K. M., Barikani, M., Khalid, A. M., Honarkar, H., & Ehsan-ul-Haq (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.02.005 · Cited by 26
Block copolymer of trans‐polyisoprene and urethane segment: Shape memory effects
Ni, X., & Sun, X. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23012 · Cited by 26
Kinetic study of the sulfonation of hydrogenated styrene butadiene block copolymer (HSBS)
Navarro, A., del Río, C., & Acosta, J. L. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.05.009 · Cited by 26
Rubber-Based Sustainable Textiles and Potential Industrial Applications
Adak, B., Chatterjee, U., & Joshi, M. (2025) · Textiles · doi:10.3390/textiles5020017 · Cited by 25
Scrap tyre rubber depolymerization by nitrous oxide: products and mechanism of reaction
Dubkov, K. A., Semikolenov, S. V., Ivanov, D. P., Babushkin, D. E., & Ворончихин, В. Д. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0284-1 · Cited by 25
Zhang, Z. X., Chen, C. H., Gao, X. W., Kim, J. K., & Xin, Z. X. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33018 · Cited by 25
Ansari, A. H., Jakarni, F. M., Muniandy, R., Hassim, S., Elahi, Z., & Zair, M. M. B. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126505 · Cited by 24
Metadata
- Venue
- CRC Press eBooks
- Publisher
- CRC Press
- Published
- 2000-11-02
- OpenAlex
- W560926351
- Cited by
- 282
- References
- 0
- Citations by year
- 2026: 3 · 2025: 11 · 2024: 5 · 2023: 11 · 2022: 8 · 2021: 16 · 2020: 14 · 2019: 22 · 2018: 12 · 2017: 16 · 2016: 14 · 2015: 14 · 2014: 8 · 2013: 9 · 2012: 6
- FWCI
- 15.87
- Type
- book
- Language
- en
- Open access
- closed
- Locations
- CRC Press eBooks (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and Applications
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Synthesis and Characterization
- Keywords
- elastomers, natural rubber, liquid rubber, styrenic block copolymers, thermoplastic polyurethane elastomers, silicone rubber, polytetrahydrofuran, cross-linked polyethylene, nitrile rubber, hydrogenated nitrile rubber, rubber recycling, EPDM rubber
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.