The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Digital manufacturing: History, perspectives, and outlook
Abstract
Digital manufacturing has been considered, over the last decade, as a highly promising set of technologies for reducing product development times and cost as well as for addressing the need for customization, increased product quality, and faster response to the market. This paper describes the evolution of information technology systems in manufacturing, outlining their characteristics and the challenges to be addressed in the future. Together with the digital manufacturing and factory concepts, the technologies considered in this paper include computer-aided design, engineering, process planning and manufacturing, product data and life-cycle management, simulation and virtual reality, automation, process control, shopfloor scheduling, decision support, decision making, manufacturing resource planning, enterprise resource planning, logistics, supply chain management, and e-commerce systems. These technologies are discussed in the context of the digital factory and manufacturing concepts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enterprise resource planning: Implementation procedures and critical success factors
Umble, E. J., Haft, R. R., & Umble, M. M. (2003) · European Journal of Operational Research · doi:10.1016/s0377-2217(02)00547-7 · Cited by 1,607
Manufacturing Systems: Theory and Practice
(2006) · Mechanical Engineering Series · doi:10.1007/0-387-28431-1 · Cited by 911
Advances in Modeling and Simulation of Grinding Processes
Brinksmeier, E., Aurich, J. C., Govekar, E., Heinzel, C., Hoffmeister, H.-W., Klocke, F., Peters, J., Rentsch, R., Stephenson, D. J., Uhlmann, E., et al. (2006) · CIRP Annals · doi:10.1016/j.cirp.2006.10.003 · Cited by 463
Auto ID systems and intelligent manufacturing control
McFarlane, D., Sarma, S., Chirn, J. L., Wong, C. Y., & Ashton, K. (2003) · Engineering Applications of Artificial Intelligence · doi:10.1016/s0952-1976(03)00077-0 · Cited by 462
Baker, A. D. (1998) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(98)80077-0 · Cited by 223
Enterprise resource planning: Developments and directions for operations management research
Jacobs, F. R., & Bendoly, E. (2003) · European Journal of Operational Research · doi:10.1016/s0377-2217(02)00546-5 · Cited by 216
Advanced manufacturing technologies and strategically flexible production
Cagliano, R., & Spina, G. (2000) · Journal of Operations Management · doi:10.1016/s0272-6963(99)00022-4 · Cited by 157
Chryssolouris, G., Mavrikios, D., Fragos, D., et al. (2000) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(00)00013-2 · Cited by 117
Self-citationThe Digital Factory between vision and reality
Bracht, U., & Masurat, T. (2005) · Computers in Industry · doi:10.1016/j.compind.2005.01.008 · Cited by 102
An IT view on perspectives of computer aided process planning research
Cay, F., & Chassapis, C. (1997) · Computers in Industry · doi:10.1016/s0166-3615(97)00070-5 · Cited by 100
Cited by
The expected contribution of Industry 4.0 technologies for industrial performance
Dalenogare, L. S., Benitez, G. B., Ayala, N. F., & Frank, A. G. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.08.019 · Cited by 2,201
Review of digital twin about concepts, technologies, and industrial applications
Liu, M., Fang, S., Dong, H., & Xu, C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.017 · Cited by 1,875
Augmented reality applications in design and manufacturing
Nee, A. Y. C., Ong, S. K., Chryssolouris, G., & Mourtzis, D. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.010 · Cited by 762
Self-citationDigital twin application in the construction industry: A literature review
Opoku, D.-G. J., Perera, S., Osei-Kyei, R., & Rashidi, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102726 · Cited by 753
Simulation in the design and operation of manufacturing systems: state of the art and new trends
Mourtzis, D. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1636321 · Cited by 727
Self-citation
Metadata
- Authors
- Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., & Georgoulias, K.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2009-05-01
- Volume
- 223
- Issue
- 5
- Pages
- 451-462
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2131791211
- Cited by
- 328
- References
- 22
- FWCI
- 23.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital manufacturing: History, perspectives, and outlook. https://app.cochat.ai/papers/10.1243/09544054jem1241
- The paper
- Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., & Georgoulias, K. (2009). Digital manufacturing: History, perspectives, and outlook. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/09544054jem1241
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.