The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes
Open accessAbstract
Rapid manufacturing (RM) is a modern production method based on layer by layer manufacturing directly from a three-dimensional computer-aided design model. The lack of tooling makes RM economically suitable for low and medium production volumes. A comparison with traditional manufacturing processes is important; in particular, cost comparison. Cost is usually the key point for decision making, with break-even points for different manufacturing technologies being the dominant information for decision makers. Cost models used for traditional production methodologies focus on material and labour costs, while modern automated manufacturing processes need cost models that are able to consider the high impact of investments and overheads. Previous work on laser sintering costing was developed in 2003. This current work presents advances and discussions on the limits of the previous work through direct comparison. A new cost model for laser sintering is then proposed. The model leads to graph profiles that are typical for layer-manufacturing processes. The evolution of cost models and the indirect cost significance in modern costing representation is shown finally.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rapid Prototyping, Principles and Applications
(2010) · Assembly Automation · doi:10.1108/aa.2010.03330dae.001 · Cited by 692
Rapid Prototyping: Principles and Applications (with Companion CD-ROM)
Chua, C. K., Leong, K. F., & Lim, C. S. (2003) · WORLD SCIENTIFIC eBooks · doi:10.1142/5064 · Cited by 413
Analysis of rapid manufacturing—using layer manufacturing processes for production
Hopkinson, N., & Dicknes, P. (2003) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/095440603762554596 · Cited by 412
Cavalieri, S., Maccarrone, P., & Pinto, R. (2004) · International Journal of Production Economics · doi:10.1016/j.ijpe.2003.08.005 · Cited by 231
Modelling and optimisation of Rapid Prototyping
Choi, S.-H., & Samavedam, S. (2002) · Computers in Industry · doi:10.1016/s0166-3615(01)00140-3 · Cited by 141
Activity-based costing model for joint products
Tsai, W.-H. (1996) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(96)00246-x · Cited by 52
Design of activity-based costing in a small company: A case study
Gunasekaran, A., & Singh, D. A. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00106-0 · Cited by 41
Activity-based management in a small company: A case study
Gunasekaran, A., McNeil, R., & Singh, D. A. (2000) · Production Planning & Control · doi:10.1080/095372800232126 · Cited by 29
Cited by
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Self-citationAdditive manufacturing in the spare parts supply chain
Khajavi, S. H., Partanen, J., & Holmström, J. (2014) · Computers in Industry · doi:10.1016/j.compind.2013.07.008 · Cited by 683
Metadata
- Authors
- Ruffo, M., Tuck, C., & Hague, R.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2006-09-01
- Volume
- 220
- Issue
- 9
- Pages
- 1417-1427
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2101737425
- Cited by
- 342
- References
- 8
- FWCI
- 5.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes. https://app.cochat.ai/papers/10.1243/09544054jem517
- The paper
- Ruffo, M., Tuck, C., & Hague, R. (2006). Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/09544054jem517
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.