The DOI matches its Crossref record.
Three-dimensional finite element analysis simulations of the fused deposition modelling process
Abstract
Fused deposition modelling (FDM) is a layer-manufacturing technology that has been widely used for rapid prototyping applications in product design and development. Owing to the intensive energy, rapid cooling, and phase changes, parts made by FDM and other layer-manufacturing processes deviate from the designed geometry, and some require laborious post-processing. Most severe form inaccuracies such as curl, warping, and delamination are attributed to the residual stress accumulations during prototype fabrications. This study investigates the FDM process, which consists of complicated heat and mass transfer phenomena coupled with mechanical loading and phase changes. A finite element analysis model using element activations has been developed to simulate the mechanical and thermal phenomena in FDM and further used for residual stress and part distortion simulations. The model has also been used to study the tool-path effects on the FDM process. Tool-path patterns affect the residual stresses in not only the magnitude but also the distribution which shows stress concentrations aligned with the primary direction of the tool path. Measured prototypes from the experiment show that the part distortion centre shifts distinctly owing to different tool-path patterns, which is consistent with the residual stress characteristics in the simulations. From the simulations, it is also shown that the short-raster tool path results in higher residual stresses, and thus possibly larger distortions, than the long-raster and alternate-raster patterns, both having similar stress distributions and distortion features.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Yin, J., Lu, C., Fu, J., Huang, Y., & Zheng, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.029 · Cited by 360
Cuan-Urquizo, E., Barocio, E., Tejada-Ortigoza, V., Pipes, R. B., Rodriguez, C. A., & Roman-Flores, A. (2019) · Materials · doi:10.3390/ma12060895 · Cited by 288
Metadata
- Authors
- Zhang, Y., & Chou, Y. K.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2006-10-01
- Volume
- 220
- Issue
- 10
- Pages
- 1663-1671
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2009279014
- Cited by
- 182
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three-dimensional finite element analysis simulations of the fused deposition modelling process. https://app.cochat.ai/papers/10.1243/09544054jem572
- The paper
- Zhang, Y., & Chou, Y. K. (2006). Three-dimensional finite element analysis simulations of the fused deposition modelling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1243/09544054jem572
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.