The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
Abstract
Abstract Multi-material fused deposition modeling (FDM) is an effective tool to realize the optimal design and manufacturing with various materials, but how to achieve an adequate level of interfacial bonding strength between dissimilar materials is still a critical problem. Herein, the influence of three multi-material FDM processing parameters, i.e. nozzle temperature, building stage temperature and printing speed, on the interfacial bonding strength of thermoplastic polyurethane (TPU)/acrylonitrile butadiene styrene (ABS) bi-material structures was experimentally investigated. It was found that the interfacial bonding strength was significantly improved from 0.86 to 1.66 MPa (increased by 93%) when the building stage temperature increased from 30 to 68 °C, which was the most effective processing parameter. Then, a heat transfer-based polymer inter-molecular diffusion theory was developed to understand the interfacial bonding mechanism. The interfacial temperature profiles during multi-material FDM process were experimentally measured by inserting thermocouples into printing specimens, and the theoretical model was well validated due to the good agreement between experimental and numerical data of interfacial temperature and bonding strength. The model provided an accurate prediction of interfacial bonding strength based on the understanding of thermally-driven diffusion of multi-material filaments; which would help improving the mechanical properties of products fabricated by multi-material FDM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Theory of Polymer Dynamics
Marrucci, G. (1987) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(87)85036-x · Cited by 9,749
The theory of polymer dynamics
Doi, M., & Edwards, S. F. (1986) · Cited by 8,928
Reptation of a Polymer Chain in the Presence of Fixed Obstacles
de Gennes, P. G. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1675789 · Cited by 4,284
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
A theory crack healing in polymers
Wool, R. P., & O’Connor, K. M. (1981) · Journal of Applied Physics · doi:10.1063/1.328526 · Cited by 1,093
Theory of the Interface between Immiscible Polymers. II
Helfand, E., & Tagami, Y. (1972) · The Journal of Chemical Physics · doi:10.1063/1.1677735 · Cited by 1,009
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Self-citation
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Self-citationRodríguez-Panes, A., Claver, J., & Camacho, A. M. (2018) · Materials · doi:10.3390/ma11081333 · Cited by 477
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
Syrlybayev, D., Zharylkassyn, B., Seisekulova, A., Akhmetov, M., Perveen, A., & Talamona, D. (2021) · Polymers · doi:10.3390/polym13101587 · Cited by 352
Metadata
- Authors
- Yin, J., Lu, C., Fu, J., Huang, Y., & Zheng, Y.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 150
- Pages
- 104-112
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2797898089
- Cited by
- 360
- References
- 36
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion. https://app.cochat.ai/papers/10.1016/j.matdes.2018.04.029
- The paper
- Yin, J., Lu, C., Fu, J., Huang, Y., & Zheng, Y. (2018). Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion. Materials & Design. https://doi.org/10.1016/j.matdes.2018.04.029
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.