CoChat

Simulated Gear-Tooth Contacts: Some Experiments upon Their Lubrication and Subsurface Deformations

Crook, A. W. · 1957 · Proceedings of the Institution of Mechanical Engineers
Cited by 63

The DOI matches its Crossref record.

Abstract

This paper describes some experiments with disk machines in which the electrical resistance between the disks was measured at various stages of running. It also describes some experiments with mild steel disks run at such loads that considerable plastic deformation occurred. The resistance measurements illustrate the process of ‘running-in’ and show that a state of almost complete hydrodynamic lubrication is eventually reached. It has also been found that the surface temperatures of the disks have a very considerable influence upon the hydrodynamic film. The flow of material in the plastically deformed disks is described and its bearing upon the mutual accommodation of engaging tooth surfaces and their subsequent pitting is discussed. An explanation of the greater propensity to pit of surfaces with the lower peripheral speeds may be provided by one unexpected feature of the flow. It was also found that even at the high loads, which produce gross plastic distortion, the mild steel disks did not scuff, and this is attributed to the persistence of hydrodynamic lubrication even under such extreme conditions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1243/pime_proc_1957_171_025_02

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 63

Metadata

Authors
Crook, A. W.
Venue
Proceedings of the Institution of Mechanical Engineers
Published
1957-06
Volume
171
Issue
1
Pages
187-214
ISSN
  • 0020-3483 (ISSN-L)
  • 2058-1203
OpenAlex
W2067695801
Cited by
63
References
0
FWCI
10.40
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Simulated Gear-Tooth Contacts: Some Experiments upon Their Lubrication and Subsurface Deformations. https://app.cochat.ai/papers/10.1243/pime_proc_1957_171_025_02
The paper
Crook, A. W. (1957). Simulated Gear-Tooth Contacts: Some Experiments upon Their Lubrication and Subsurface Deformations. Proceedings of the Institution of Mechanical Engineers. https://doi.org/10.1243/pime_proc_1957_171_025_02

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.