The Effect of Material Properties on the Lubrication of Elastic Rollers
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The effect of the significant variables on solutions to the problem of isothermal lubrication of elastic rollers is examined. It is found that for realistic materials, speeds, and loads, the outlet pressure peak predicted by Grubin (4) is always present. The magnitude of this pressure peak may exceed the maximum Hertzian pressure. It varies only slightly with load, but markedly with speed and materials. The influence of these variables on the shape of the outlet pressure curve explains the difference between Petrusevich's results (5) and those presented earlier by the authors. The stress concentrations produced near the surface by the outlet pressure peak would have a significant effect on the fatigue life of rolling elements. It is found that the centre-line film thickness varies hardly at all with load, significantly with material properties and considerably with the product of speed and inlet viscosity. Pressure distributions and film shapes are presented for five cases to illustrate the influence of load, speed, and materials. In addition, maximum principal stress differences are shown for two solutions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The proximity equations used to predict lubricant film parameters in EHL infinite 2D line or 3D circular point contacts are based on the most widely used non-dimensional similarity group proposed by Dowson and Higginson [5, 6], as summarized in Table 1.”
From Predicting EHL film thickness parameters by machine learning approaches (2023) · cites this paper as [5]
Citations
Cites
A numerical solution to the elasto-hydrodynamic problem
Dowson, D., & Higginson, G. R. (1959) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1959_001_004_02 · Cited by 663
Self-citationPoritsky, H. (1950) · Journal of Applied Mechanics · doi:10.1115/1.4010099 · Cited by 229
Crook, A. W. (1958) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1958.0001 · Cited by 174
Simulated Gear-Tooth Contacts: Some Experiments upon Their Lubrication and Subsurface Deformations
Crook, A. W. (1957) · Proceedings of the Institution of Mechanical Engineers · doi:10.1243/pime_proc_1957_171_025_02 · Cited by 63
The Measurement of Oil-Film Thickness in Gear Teeth
MacConochie, I. O., & Cameron, A. (1960) · Journal of Basic Engineering · doi:10.1115/1.3662549 · Cited by 50
Research works printed but not linked: 1
- Poritsky H., 1952, ‘Fundamentals of Friction and Lubrication in Engineering’, 98
Cited by
Modeling and simulation in tribology across scales: An overview
Vakis, A. I., Yastrebov, V. A., Scheibert, J., Nicola, L., Dini, D., Minfray, C., Almqvist, A., Paggi, M., Lee, S., Limbert, G., et al. (2018) · Tribology International · doi:10.1016/j.triboint.2018.02.005 · Cited by 580
Pressure-forcing of tightly fitting pellets along fluid-filled elastic tubes
Lighthill, M. J. (1968) · Journal of Fluid Mechanics · doi:10.1017/s0022112068001795 · Cited by 176
A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders
Cheng, H. S. (1965) · A S L E Transactions · doi:10.1080/05698196508972110 · Cited by 174
Elasto-hydrodynamic lubrication: A survey of isothermal solutions
Dowson, D., Higginson, G. R., & Whitaker, A. V. (1962) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1962_004_018_02 · Cited by 157
Self-citationElastohydrodynamic Lubrication
Halling, J. (1978) · doi:10.1007/978-1-349-04138-1_11 · Cited by 147
Metadata
- Authors
- Dowson, D., & Higginson, G. R.
- Affiliations
- University of Leeds (GB)
- Venue
- Journal of Mechanical Engineering Science
- Publisher
- SAGE Publications
- Published
- 1960-09
- Volume
- 2
- Issue
- 3
- Pages
- 188-194
- ISSN
- 0022-2542 (ISSN-L)
- 2058-3389
- OpenAlex
- W2018115082
- Cited by
- 80
- References
- 5
- Citations by year
- 2026: 2 · 2025: 3 · 2024: 5 · 2023: 5 · 2022: 4 · 2021: 3 · 2020: 5 · 2019: 1 · 2018: 1 · 2015: 2 · 2014: 2
- FWCI
- 21.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Mechanical Engineering Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- isothermal lubrication, elastohydrodynamic lubrication, Hertzian contact stress, film thickness, material properties, stress concentration, maximum principal stress, pressure distribution
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Material Properties on the Lubrication of Elastic Rollers. https://app.cochat.ai/papers/10.1243/jmes_jour_1960_002_028_02
- The paper
- Dowson, D., & Higginson, G. R. (1960). The Effect of Material Properties on the Lubrication of Elastic Rollers. Journal of Mechanical Engineering Science. https://doi.org/10.1243/jmes_jour_1960_002_028_02
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.