CoChat

Basic Study on Lithium Recovery from Lithium Containing Solution

Yoshinaga, Tetsutaro, Kawano, Kentaro, Imoto, Hirotsugu · 1986 · Bulletin of the Chemical Society of Japan
Cited by 20

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Basic study of Li recovery using high purity sodium aluminate solution as coprecipitating agent has been made. Al concentration, pH and temperature greatly affect the Li recovery, and in this study the temperature was maintained constant (25 °C). For reference lithium solution, the optimum (initial) pH obtained increased with an increase in Al concentration. Optimum pH=11.0–12.5 for [Al]=50–1000 mg dm−3. The optimum pH values obtained were lower than those in the previous work by about one pH unit. The following relationship was found between the Al concentration CAl (mg dm−3) and the optimum pH; Opt. pHexp=8.23+1.5log CAl. Furthermore, these experimental pH values were in fair agreement with the pH values calculated from the solubility product of aluminium hydroxide, Ksp (HAlO2)=[H+][AlO2−]=10−13.2, i.e., pHcalcd=9.5+log CAl. Effects of coexistent ions on Li recovery were examined. Sodium and potassium ions did not interfere, while calcium, magnesium, and monosilicate ions did. However, the interference from Ba2+ ions was small. Especially, interference by calcium and monosilicate ions were significant. Bubbling of CO2 gas into the Li solution with proper Al concentration made a remarkable improvement on Li recovery. Accordingly, the influence of water soluble carbonates on Li recovery was investigated. The carbonates (Na2CO3, K2CO3, (NH4)2CO3) used were found to be very effective for Li recovery. The addition of sodium aluminate solution (500 mg dm−3) to untreated geothermal water showed around 70% of Li recovery at the best. This incomplete recovery of lithium is due to the matrix effect of geothermal water. For reference Li solution with Al concentration of 500 mg dm−3, optimum pH was 12.5, while for Ca, SiO2-free geothermal water the same pH gave very low Li recovery. However, when a pH value of 11.5 is chosen, a remarkable increase in Li recovery was obtained (98–99%). The silica component in geothermal water interfered with the Li recovery, but the influence was relatively small. The silica in the geothermal water in this case, was polymerized and showed some buffering action, such as prevention of interference from calcium ions. This is the significant difference between poly and monosilicate ions which do not show any buffering action. The addition of sodium carbonate to the Ca,SiO2-free geothermal water caused a remarkable acceleration of the Li recovery, similar to that for the reference Li solution.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1246/bcsj.59.1207

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 2

  1. 10.1246/bcsj.56.2490 · DOI · Paper page
  2. 10.1246/nikkashi1898.70.4_425 · doi:10.1246/nikkashi1898.70.4_425

Cited by

See all 20

Metadata

Authors
Yoshinaga, T., Kawano, K., & Imoto, H.
Venue
Bulletin of the Chemical Society of Japan
Published
1986-04-01
Volume
59
Issue
4
Pages
1207-1213
ISSN
  • 0009-2673 (ISSN-L)
  • 1348-0634
OpenAlex
W1969808360
Cited by
20
References
1
FWCI
1.39
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Basic Study on Lithium Recovery from Lithium Containing Solution. https://app.cochat.ai/papers/10.1246/bcsj.59.1207
The paper
Yoshinaga, T., Kawano, K., & Imoto, H. (1986). Basic Study on Lithium Recovery from Lithium Containing Solution. Bulletin of the Chemical Society of Japan. https://doi.org/10.1246/bcsj.59.1207

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.