Comparison of Removal Efficiencies for Ammonia and Amine Gases between Woody Charcoal and Activated Carbon
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The removal efficiency of NH3, (CH3)NH2, (CH3)2NH and (CH3)3N into woody charcoal carbonized at 500°C and activated carbon was determined by the attenuation of their concentrations in the 5 l bags at cool (5°C) and room temperature (20°C). A discussion follows on the deodorization performance against four gases with attention to the physical and chemical characteristics of adsorbent surfaces. It was found that the high acidity of woody charcoal surface was more suitable for the adsorption of NH3 and (CH3)NH2 gases than the activated carbon under both temperatures, and the activated carbon having larger micro, meso pore volumes following an increase in specific surface area showed higher capacity for (CH3)3N gas adsorption than the woody charcoal. Also the activated carbon is more suitable for (CH3)2NH gas adsorption than the woody charcoal at 5°C, but its removal efficiency using the activated carbon is lower than the woody charcoal at 20°C. Much acidic functional groups on the adsorbent has high adsorption potential just like chemical adsorption is necessary to enhancement of (CH3)2NH gas at 20°C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Asada, T., Ishihara, S., Yamane, T., Toba, A., Yamada, A., & Oikawa, K. (2002) · Journal of Health Science · doi:10.1248/jhs.48.473 · Cited by 196
Cited by
Bio-char Sequestration in Terrestrial Ecosystems – A Review
Lehmann, J., Gaunt, J., & Rondon, M. (2006) · Mitigation and Adaptation Strategies for Global Change · doi:10.1007/s11027-005-9006-5 · Cited by 3,053
“Black C in soil similar to bio-chars efficiently adsorbs ammonia (NH 3 ) (e.g., Oya and Iu 2002; Iyobe et al. 2004) and acts as a buffer for ammonia in soil, therefore having the potential to decrease ammonia volatilization from agricultural fields.”
BackgroundEffect of Low-Temperature Pyrolysis Conditions on Biochar for Agricultural Use
Gaskin, J. W., Steiner, C., Harris, K., Das, K. C., & Bibens, B. (2008) · Transactions of the ASABE · doi:10.13031/2013.25409 · Cited by 1,015
Qambrani, N. A., Rahman, M. M., Won, S., Shim, S., & Ra, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.057 · Cited by 774
Biochar and the Nitrogen Cycle: Introduction
Clough, T. J., & Condron, L. M. (2010) · Journal of Environmental Quality · doi:10.2134/jeq2010.0204 · Cited by 482
Reducing Nitrogen Loss during Poultry Litter Composting Using Biochar
Steiner, C., Das, K. C., Melear, N., & Lakly, D. (2010) · Journal of Environmental Quality · doi:10.2134/jeq2009.0337 · Cited by 471
“Iyobe et al. (2004) showed that woody charcoal produced at 500°C had a higher capacity for NH3 adsorption than the activated C. Biochars generated at low pyrolysis temperatures can also adsorb NH3 if acidic functional groups are present on the BC surface or if the BC has a low pH (Kastner et al.,…”
Metadata
- Authors
- Tsutomu, I., Takashi, A., Kuniaki, K., & Kikuo, O.
- Venue
- Journal of Health Science
- Publisher
- Pharmaceutical Society of Japan
- Published
- 2004
- Volume
- 50
- Issue
- 2
- Pages
- 148-153
- ISSN
- 0013-273X (ISSN-L)
- 1344-9702
- 1347-5207
- OpenAlex
- W2056880040
- Cited by
- 100
- References
- 1
- FWCI
- 2.04
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of Removal Efficiencies for Ammonia and Amine Gases between Woody Charcoal and Activated Carbon. https://app.cochat.ai/papers/10.1248/jhs.50.148
- The paper
- Tsutomu, I., Takashi, A., Kuniaki, K., & Kikuo, O. (2004). Comparison of Removal Efficiencies for Ammonia and Amine Gases between Woody Charcoal and Activated Carbon. Journal of Health Science. https://doi.org/10.1248/jhs.50.148
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.