The DOI matches its Crossref record.
Scale effect on breakup process in liquid-liquid agitated tanks.
Open accessAbstract
The effect of scale on the breakup process in liquid-liquid agitated tanks was investigated. Transient drop size distributions in the breakup process were measured in geometrically similar mixing vessels at equal power input per unit mass, which was taken as a scale-up criterion under the assumption of isotropic turbulence for the flow around drops. The distributions in each vessel, however, did not undergo the same variation with time and the condition of equal power input per unit mass was found to be inappropriate as a scale-up criterion for the breakup process. The experimental result was explained from direct observation of breakups in the mixing vessels by high-speed cine-photography. The observations made it clear that breakups occurred not only in the isotropic turbulent region but also in the nonisotropic turbulent region. A new model for the breakup process was proposed which considers breakups in both regions. This model successfully predicted the transient drop size distributions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Eggers, J., & Villermaux, E. (2008) · Reports on Progress in Physics · doi:10.1088/0034-4885/71/3/036601 · Cited by 1,827
A literature review of theoretical models for drop and bubble breakup in turbulent dispersions
Liao, Y., & Lucas, D. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.04.026 · Cited by 698
Liquid Jet Instability and Atomization in a Coaxial Gas Stream
Lasheras, J. C., & Hopfinger, E. J. (2000) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.32.1.275 · Cited by 564
MARTÍNEZ-BAZÁN, C., MONTAÑÉS, J. L., & LASHERAS, J. C. (1999) · Journal of Fluid Mechanics · doi:10.1017/s0022112099006680 · Cited by 476
Villermaux, E. (2007) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.39.050905.110214 · Cited by 461
Drop breakup in turbulent stirred‐tank contactors. Part I: Effect of dispersed‐phase viscosity
Calabrese, R. V., Chang, T. P. K., & Dang, P. T. (1986) · AIChE Journal · doi:10.1002/aic.690320416 · Cited by 426
Coagulation and fragmentation: Universal steady‐state particle‐size distribution
Spicer, P. T., & Pratsinis, S. E. (1996) · AIChE Journal · doi:10.1002/aic.690420612 · Cited by 335
Two-Phase Flow, Boiling, and Condensation: In Conventional and Miniature Systems
Ghiaasiaan, S. M. (2017) · Cambridge University Press eBooks · doi:10.1017/9781316597392 · Cited by 286
Yuan, H. G., Kalfas, G., & Ray, W. H. (1991) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321799108021924 · Cited by 262
A novel theoretical breakup kernel function for bubbles/droplets in a turbulent flow
Wang, T., Wang, J., & Jin, Y. (2003) · Chemical Engineering Science · doi:10.1016/j.ces.2003.07.009 · Cited by 260
Metadata
- Authors
- KONNO, M., AOKI, M., & SAITO, S.
- Venue
- JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
- Publisher
- Informa UK Limited
- Published
- 1983
- Volume
- 16
- Issue
- 4
- Pages
- 312-319
- ISSN
- 0021-9592 (ISSN-L)
- 1881-1299
- OpenAlex
- W2025224595
- Cited by
- 202
- References
- 0
- FWCI
- 1.56
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.