The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Kanban, MRP, and Shaping the Manufacturing Environment
Abstract
There has been a great deal of interest recently in the Japanese approach to manufacturing, growing out of a concern for finding ways to reduce inventories and increase productivity. At this project's inception, its objective was to assess whether the kanban system could perform well in the manufacturing environments found in this country. Based on observations from managers visiting Japan, the project was enlarged to also assess which factors in a production environment have the biggest impact on performance—regardless of the system in use. Guided by a panel of production and inventory managers from diverse plant environments, a comprehensive list of factors thought most important to manufacturing effectiveness was constructed. The panel established low and high values for each one. These settings were considered representative of the range experienced in U.S. plant environments. The factor settings allowed a variety of representative plants to be tested with a large scale simulator. Results show that kanban, when implemented in certain environmental settings, does indeed perform exceptionally well. However, so do the more traditional systems used in the United States. Conversely, there are other plant environments in which all systems perform much worse. This suggests that the factors themselves are the keys to major improvement. Simultaneously reducing setup times and lot sizes is found to be the single most effective way to cut inventory levels and improve customer service. Shop factors of particular importance are yield rates and worker flexibility. Degree of product standardization and the product structure are also high impact factors. Less crucial than earlier believed, at least over the factor settings simulated, are inventory record inaccuracy, equipment failures, and vendor reliability. Such results suggest that the selection of a production/inventory system can be of less importance than the improvement of the manufacturing environment itself.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SUGIMORI, Y., KUSUNOKI, K., CHO, F., & UCHIKAWA, S. (1977) · International Journal of Production Research · doi:10.1080/00207547708943149 · Cited by 1,327
Japanese manufacturing techniques
(1983) · Business Horizons · doi:10.1016/0007-6813(83)90111-8 · Cited by 782
HEURISTIC LOT‐SIZING AND SEQUENCING RULES IN A MULTISTAGE PRODUCTION‐INVENTORY SYSTEM
Biggs, J. R. (1979) · Decision Sciences · doi:10.1111/j.1540-5915.1979.tb00010.x · Cited by 70
Cited by
Effective supply chain management: Understanding the impact of complexity and mitigation strategies
(2020) · Strategic Direction · doi:10.1108/sd-04-2020-0081 · Cited by 898
To Pull or Not to Pull: What Is the Question?
Hopp, W. J., & Spearman, M. L. (2004) · Manufacturing & Service Operations Management · doi:10.1287/msom.1030.0028 · Cited by 592
A literature review on the impact of RFID technologies on supply chain management
Sarac, A., Absi, N., & Dauzère-Pérès, S. (2010) · International Journal of Production Economics · doi:10.1016/j.ijpe.2010.07.039 · Cited by 589
Inventory inaccuracy and supply chain performance: a simulation study of a retail supply chain
Fleisch, E., & Tellkamp, C. (2005) · International Journal of Production Economics · doi:10.1016/j.ijpe.2004.02.003 · Cited by 389
Echelon Reorder Points, Installation Reorder Points, and the Value of Centralized Demand Information
Chen, F. (1998) · Management Science · doi:10.1287/mnsc.44.12.s221 · Cited by 315
Metadata
- Authors
- Krajewski, L. J., King, B. E., Ritzman, L. P., & Wong, D. S.
- Venue
- Management Science
- Published
- 1987-01
- Volume
- 33
- Issue
- 1
- Pages
- 39-57
- ISSN
- 0025-1909 (ISSN-L)
- 1526-5501
- OpenAlex
- W2060257366
- Cited by
- 386
- References
- 3
- FWCI
- 76.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Kanban, MRP, and Shaping the Manufacturing Environment. https://app.cochat.ai/papers/10.1287/mnsc.33.1.39
- The paper
- Krajewski, L. J., King, B. E., Ritzman, L. P., & Wong, D. S. (1987). Kanban, MRP, and Shaping the Manufacturing Environment. Management Science. https://doi.org/10.1287/mnsc.33.1.39
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.