The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting
The DOI matches its OpenAlex record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
In this paper the tuned mass-damper-inerter (TMDI) is considered for passive vibration control and energy harvesting in harmonically excited structures. The TMDI couples the classical tuned mass-damper (TMD) with a grounded inerter: a two-terminal linear device resisting the relative acceleration of its terminals by a constant of proportionality termed inertance. In this manner, the TMD is endowed with additional inertia, beyond the one offered by the attached mass, without any substantial increase to the overall weight. Closed-form analytical expressions for optimal TMDI parameters, stiffness and damping, given attached mass and inertance are derived by application of Den Hartog’s tuning approach to suppress the response amplitude of force and base-acceleration excited single-degree-of-freedom structures. It is analytically shown that the TMDI is more effective from a same mass/weight TMD to suppress vibrations close to the natural frequency of the uncontrolled structure, while it is more robust to detuning effects. Moreover, it is shown that the mass amplification effect of the inerter achieves significant weight reduction for a target/predefined level of vibration suppression in a performance-based oriented design approach compared to the classical TMD. Lastly, the potential of using the TMDI for energy harvesting is explored by substituting the dissipative damper with an electromagnetic motor and assuming that the inertance can vary through the use of a flywheel-based inerter device. It is analytically shown that by reducing the inertance, treated as a mass/inertia-related design parameter not considered in conventional TMD-based energy harvesters, the available power for electric generation increases for fixed attached mass/weight, electromechanical damping, and stiffness properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of mechanical networks: the inerter
Smith, M. C. (2002) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2002.803532 · Cited by 1,828
Marian, L., & Giaralis, A. (2014) · Probabilistic Engineering Mechanics · doi:10.1016/j.probengmech.2014.03.007 · Cited by 828 · cited 6×
“In fact, the authors showed that for the same attached mass the TMDI performs better than the classical TMD, treated as a special case of the TMDI, in suppressing the displacement variance of stochastically based-excited SDOF and MDOF primary structures (Marian and Giaralis 2013, 2014).”
InfluentialSelf-citationThe Theory of the Dynamic Vibration Absorber
Ormondroyd, J., & Den Hartog, J. P. (1928) · Transactions of the American Society of Mechanical Engineers · doi:10.1115/1.4058553 · Cited by 779
Parametric study and simplified design of tuned mass dampers
Rana, R., & Soong, T. T. (1998) · Engineering Structures · doi:10.1016/s0141-0296(97)00078-3 · Cited by 651 · cited 2×
“Notably, the above TMD design formulae can be further applied to suppress the vibratory motion corresponding to a single (e.g. the dominant) structural mode shape in the case of lightly damped multi degree-of-freedom (MDOF) primary structures (e.g. Rana and Soong 1998).”
Optimal tuned mass damper for seismic applications and practical design formulas
Hoang, N., Fujino, Y., & Warnitchai, P. (2008) · Engineering Structures · doi:10.1016/j.engstruct.2007.05.007 · Cited by 382
A Note on the Damped Vibration Absorber
Brock, J. E. (1946) · Journal of Applied Mechanics · doi:10.1115/1.4009588 · Cited by 356
Yamaguchi, H., & Harnpornchai, N. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290220105 · Cited by 341 · cited 1×
“…optimal design of inelastic TMDs is considerably more challenging compared to the linear TMD. Alternatively, robustness to detuning effects can be achieved by use of multiple TMDs (MTMDs) linked in parallel (e.g. Xu and Igusa, 1992, Yamaguchi and Harnpornchai 1993) or in series (Zuo 2009).”
Dynamic characteristics of multiple substructures with closely spaced frequencies
Xu, K., & Igusa, T. (1992) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290211203 · Cited by 326
Performance evaluation for inerter-based dynamic vibration absorbers
Hu, Y., & Chen, M. Z. Q. (2015) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2015.06.003 · Cited by 325
Dynamic response and optimal design of structures with large mass ratio TMD
De Angelis, M., Perno, S., & Reggio, A. (2012) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.1117 · Cited by 239 · cited 1×
“Indeed, the larger the attached TMD mass considered, the more effective an optimally designed linear TMD becomes to suppress excessive primary structure vibrations and the less sensitive to detuning effects (see e.g. De Angelis et al 2012 and references therein).”
Cited by
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Giaralis, A., & Taflanidis, A. A. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2082 · Cited by 328
Self-citationShen, W., Niyitangamahoro, A., Feng, Z., & Zhu, H. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109470 · Cited by 175
Dai, J., Xu, Z.-D., & Gai, P.-P. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109585 · Cited by 163
Metadata
- Authors
- Marian, L., & Giaralis, A.
- Venue
- City Research Online (City University London)
- Publisher
- City, University of London
- Published
- 2017-06-01
- Volume
- 19
- Issue
- 6
- Pages
- 665-678
- OpenAlex
- W2768773885
- Cited by
- 131
- References
- 11
- FWCI
- 13.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting. https://app.cochat.ai/papers/10.12989/sss.2017.19.6.665
- The paper
- Marian, L., & Giaralis, A. (2017). The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting. City Research Online (City University London). https://doi.org/10.12989/sss.2017.19.6.665
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.