Impedance-Based Structural Health Monitoring for Temperature Varying Applications.
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A new structural health monitoring technique capable of in-service, on-line incipient damage detection has been proposed by the Center for Intelligent Material Systems and Structures, Physical changes in a structure cause changes in the mechanical impedance. Due to the electromechanical coupling in piezoelectric materials, this change causes a change in the electrical impedance of the piezoelectric sensor. Hence, by monitoring the electrical impedance and comparing this to a baseline measurement, we can determine when structural damage has either occurred or is imminent. However, in almost all practical health monitoring applications, the structure being monitored is constantly undergoing change due to the effect of external boundary conditions. One of the important factors that leads to this change is the temperature variations. In this paper, temperature effects on the electrical impedance of piezoelectric materials and the structures have been investigated. A computer algorithm was developed which incorporates temperature compensation into our health monitoring applications. Three experimental investigations were performed successfully under the temperature varying condition, in the range of 25 to 75°C, including a bolted pipe structure, composite reinforced aluminum and precision part such as gears. It was found that, by this compensation procedure, the impedance based health monitoring tehcnique is able to detect damage in the incipient stage, even with the presence of significant temperature variation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches
Chaudhry, Z. A., Joseph, T., Sun, F. P., & Rogers, C. A. (1995) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.208264 · Cited by 133
Cited by
Impedance-Based Health Monitoring of Civil Structural Components
Park, G., Cudney, H. H., & Inman, D. J. (2000) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2000)6:4(153 · Cited by 460
Self-citationNa, W. S., & Baek, J. (2018) · Sensors · doi:10.3390/s18051307 · Cited by 336
Baptista, F., Budoya, D., Almeida, V., & Ulson, J. (2014) · Sensors · doi:10.3390/s140101208 · Cited by 286
Improving Accessibility of the Impedance-Based Structural Health Monitoring Method
Peairs, D. M., Park, G., & Inman, D. J. (2004) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x04039914 · Cited by 278
Self-citationFeasibility of using impedance‐based damage assessment for pipeline structures
Park, G., Cudney, H. H., & Inman, D. J. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.72 · Cited by 272
Self-citation
Metadata
- Authors
- PARK, G., KABEYA, K., CUDNEY, H. H., & INMAN, D. J.
- Venue
- JSME International Journal Series A
- Published
- 1999
- Volume
- 42
- Issue
- 2
- Pages
- 249-258
- ISSN
- 1340-8046 (ISSN-L)
- 1344-7912
- 1347-5363
- OpenAlex
- W1981345485
- Cited by
- 284
- References
- 1
- FWCI
- 10.82
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.