The DOI matches its Crossref record.
A Review on High-Speed Machining of Titanium Alloys
Open accessAbstract
Titanium alloys have been widely used in the aerospace, biomedical and automotive industries because of their good strength-to-weight ratio and superior corrosion resistance. However, it is very difficult to machine them due to their poor machinability. When machining titanium alloys with conventional tools, the tool wear rate progresses rapidly, and it is generally difficult to achieve a cutting speed of over 60m/min. Other types of tool materials, including ceramic, diamond, and cubic boron nitride (CBN), are highly reactive with titanium alloys at higher temperature. However, binder-less CBN (BCBN) tools, which do not have any binder, sintering agent or catalyst, have a remarkably longer tool life than conventional CBN inserts even at high cutting speeds. In order to get deeper understanding of high speed machining (HSM) of titanium alloys, the generation of mathematical models is essential. The models are also needed to predict the machining parameters for HSM. This paper aims to give an overview of recent developments in machining and HSM of titanium alloys, geometrical modeling of HSM, and cutting force models for HSM of titanium alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
Bermingham, M. J., Kirsch, J., Sun, S., Palanisamy, S., & Dargusch, M. S. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.02.009 · Cited by 364
Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining
Dandekar, C. R., Shin, Y. C., & Barnes, J. (2010) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.10.013 · Cited by 351
Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review
Saini, A., Pabla, B., & Dhami, S. (2016) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405416640176 · Cited by 67
Ali, A., Younas, M., Khan, M., Jaffery, S. H. I., & Khan, Z. (2025) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-024-01147-9 · Cited by 31
Metadata
- Authors
- RAHMAN, M., WANG, Z.-G., & WONG, Y.-S.
- Venue
- JSME International Journal Series C
- Published
- 2006
- Volume
- 49
- Issue
- 1
- Pages
- 11-20
- ISSN
- 1344-7653 (ISSN-L)
- 1347-538X
- OpenAlex
- W2026302403
- Cited by
- 267
- References
- 0
- FWCI
- 7.75
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review on High-Speed Machining of Titanium Alloys. https://app.cochat.ai/papers/10.1299/jsmec.49.11
- The paper
- RAHMAN, M., WANG, Z.-G., & WONG, Y.-S. (2006). A Review on High-Speed Machining of Titanium Alloys. JSME International Journal Series C. https://doi.org/10.1299/jsmec.49.11
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
