EFFECTS OF ALTERNATIVE PROCESS GASES ON THE THERMOCHEMICAL CONVERSION PROCESS OF SWINE MANURE
The DOI matches its Crossref record.
Abstract
A thermochemical conversion (TCC) process was developed to convert swine manure into an oil product in a hightemperature and pressure environment. The objective of this study was to examine the effects of different process gases,including CO, H2, CO2, N2, and compressed air, on the efficiencies of oil production and waste reduction, and to explore thepossibility of replacing costly reducing process gases, such as CO, with an inexpensive inert gas such as compressed air. Itwas found that the addition of a process gas to the reaction system before the experiment was critical for the TCC processto yield an oil product. Both reducing gases (such as CO and H2) and inert gases (such as CO2, N2, and compressed air) canbe used as a process gas. With the addition of reducing gases (i.e., CO and H2), the process yielded a better quality oil productand achieved a higher oil production efficiency. There were no significant differences in the chemical oxygen demandreduction rate among the five process gases mentioned above. The pressurized process created by water vapor alone did notyield an oil product. It is unclear why the inert gases of N2, CO2, and compressed air affected the oil product formation fromswine manure but water vapor did not.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Competitive liquid biofuels from biomass
Demirbas, A. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.07.016 · Cited by 796
Chen, W.-T., Zhang, Y., Zhang, J., Yu, G., Schideman, L. C., Zhang, P., & Minarick, M. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.10.111 · Cited by 379
Self-citationYin, S., Dolan, R., Harris, M., & Tan, Z. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.12.058 · Cited by 331
Nitrogen in bio-oil produced from hydrothermal liquefaction of biomass: A review
Leng, L., Zhang, W., Peng, H., Li, H., Jiang, S., & Huang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126030 · Cited by 278
Fundamentals of HydrofactionTM: Renewable crude oil from woody biomass
Jensen, C. U., Rodriguez Guerrero, J. K., Karatzos, S., Olofsson, G., & Iversen, S. B. (2017) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-017-0248-8 · Cited by 153
Metadata
- Authors
- He, B. J., Zhang, Y., Yin, Y., Funk, T. L., & Riskowski, G. L.
- Venue
- Transactions of the ASAE
- Published
- 2001
- Volume
- 44
- Issue
- 6
- ISSN
- 0001-2351 (ISSN-L)
- 2151-0059
- OpenAlex
- W2069634340
- Cited by
- 24
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.