Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 242

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Innovative methods for flow-unit and pore-structure analyses in a tight siltstone and shale gas reservoir

Clarkson, Christopher R., Jensen, Jerry L., Pedersen, Per Kent, Freeman, Melissa · 2012 · AAPG Bulletin

Abstract

Abstract Tight gas reservoirs are notoriously difficult to characterize; routine methods developed for conventional reservoirs are not appropriate for tight gas reservoirs. In this article, we investigate the use of nonroutine methods to characterize permeability heterogeneity and pore structure of a tight gas reservoir for use in flow-unit identification. Profile permeability is used to characterize fine-scale (<1 in. [<2.5 cm]) vertical heterogeneity in a tight gas core; more than 500 measurements were made. Profile permeability, although useful for characterizing heterogeneity, will not provide in-situ estimates of permeability; furthermore, the scale of measurement is much smaller than log scale. Pulse-decay permeability measurements collected on core plugs under confining pressure were used to correct the profile permeability measurements to in-situ stress conditions, and 13-point averages of profile permeability were used to relate to log-derived porosity measurements. Finally, N2 adsorption, a new method for tight gas was used to estimate the pore-size distribution of several tight gas samples. A unimodal or bimodal distribution was observed for the samples, with the larger peak corresponding to the dominant pore-throat size, as confirmed by independent methods. Furthermore, the adsorption-desorption hysteresis loop shape was used to interpret the dominant pore shape as slot-shaped pores, which is typical of many tight gas reservoirs. The N2 adsorption method provides rapid analysis and does not suffer from some of the same limitations of Hg injection. In the future, we hope that the N2 adsorption method may prove useful for flow-unit characterization (based on dominant pore size) of fine-grained (siltstone-shale) tight gas reservoirs.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1306/05181110171

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 242

Metadata

Authors
Clarkson, C. R., Jensen, J. L., Pedersen, P. K., & Freeman, M.
Venue
AAPG Bulletin
Published
2012-02
Volume
96
Issue
2
Pages
355-374
ISSN
0149-1423 (ISSN-L)
OpenAlex
W2126800276
Cited by
242
References
2
FWCI
17.71
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.