Modeling Biomass Collection and Woods Processing Life-Cycle Analysis*
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A deterministic spreadsheet model developed in an earlier Consortium for Research on Renewable Industrial Materials (CORRIM) project that calculates cost, fuel, and chemical outputs of forest management and harvesting activities was modified to include logic for systems used to recover forest residue. Two illustrative biomass recovery systems with variations were modeled. A system to recover residues after whole-tree harvesting operations was applied to a representative forest stand in the Inland West. Whole-tree chipping in an early thinning was applied to a representative forest stand in the Southeast United States. Emission factors and life-cycle outputs were developed for the systems through the SimaPro v7.3 model using one if its environmental impact methodologies called TRACI2. Most environmental outputs, including global warming potential, had a direct relationship to fuel consumption of the recovery systems. These outputs were subsequently used as inputs to life-cycle analysis in biofuel conversion facilities. Fuel consumption for recovery of residues from the log landing was 8.10, 12.0, and 16.0 liters per bone dry metric ton (BDmT) at haul distances of 48, 97, and 145 km, respectively. Corresponding fuel consumption for whole-tree chipping and hauling at these distances was 10.5, 16.0, and 21.5 liters/BDmT. Shuttling ground residue from the landing for reload and a subsequent long haul of 145 km increased fuel consumption 32 percent over the residue recovery base case. Shuttling loose residue for centralized processing with a long haul distance of 145 km increases fuel consumption by 86 percent over recovery directly from the landing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Harrill, H., & Han, H.-S. (2012) · International Journal of Forestry Research · doi:10.1155/2012/893079 · Cited by 41 · cited 1×
“Productivity of the whole-tree chipper was developed from a number of studies of midsize chippers averaging 336 kW (450 hp; Mitchell and Gallager 2007, Aman et al. 2010, Harrill and Han 2012).”
MethodProductivity of a prototype truck-mounted logging residue bundler and a road-side bundling system
Lindroos, O., Matisons, M., Johansson, P., & Nordfjell, T. (2010) · Silva Fennica · doi:10.14214/sf.148 · Cited by 10 · cited 1×
“Some proposed methods of compaction on board the truck are fairly sophisticated (Johansson et al. 2006, Lindroos et al. 2010), while others simply involve packing the residue with the loading machine.”
Method
Cited by
Handler, R. M., Shonnard, D. R., Griffing, E. M., Lai, A., & Palou-Rivera, I. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03215 · Cited by 142
Lan, K., Kelley, S. S., Nepal, P., & Yao, Y. (2020) · Environmental Research Letters · doi:10.1088/1748-9326/abc5e6 · Cited by 95
The Economics of Biomass Logistics and Conversion Facility Mobility: An Oregon Case Study
Berry, M. D., & Sessions, J. (2018) · Applied Engineering in Agriculture · doi:10.13031/aea.12383 · Cited by 29
Metadata
- Authors
- Johnson, L., Lippke, B., & Oneil, E.
- Venue
- Forest Products Journal
- Publisher
- Forest Products Society
- Published
- 2012-07
- Volume
- 62
- Issue
- 4
- Pages
- 258-272
- ISSN
- 0015-7473 (ISSN-L)
- OpenAlex
- W1975657504
- Cited by
- 58
- References
- 2
- FWCI
- 8.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling Biomass Collection and Woods Processing Life-Cycle Analysis*. https://app.cochat.ai/papers/10.13073/fpj-d-12-00019.1
- The paper
- Johnson, L., Lippke, B., & Oneil, E. (2012). Modeling Biomass Collection and Woods Processing Life-Cycle Analysis*. Forest Products Journal. https://doi.org/10.13073/fpj-d-12-00019.1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.