On-Site Energy Consumption at Softwood Sawmills in Montana
The DOI matches its Crossref record; 31 of the 33 references it cites were found in a registry or an index.
Abstract
Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis for both renewable and nonrenewable sources for production year 2009. Survey respondents represented 92 percent of total Montana softwood lumber production of 449 million board feet, which is 4 percent of western US production and 2 percent of national production. Total annual on-site sawmill energy required was 1.6 trillion British thermal units. Seventy-seven percent was derived from wood and bark, primarily for process heat and steam for lumber drying; 16 percent was from electricity; 5 percent was from diesel used for on-site rolling stock; and the remainder was from gasoline, propane, and natural gas. Energy produced from renewable sources accounted for 86 percent of total on-site energy consumption. In addition to providing an energy profile of Montana sawmills for policymakers, aggregated results may be useful to individual firms in characterizing their energy requirements relative to the state average and in identifying potential opportunities for bioenergy expansion.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“for live softwood, 64% of the energy demand during sawmill processing is met with wood waste generated onsite”
From Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface (2025) · cites this paper as [73]
In the citing paper
“GHG emissions and energy demand for processing mixed live softwood in sawmills are consistent with the values for softwood lumber preparation in previous studies [55, 73-76].”
From Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface (2025) · cites this paper as [73]
Citations
Cites
US Environmental Protection Agency
(1998) · Choice Reviews Online · doi:10.5860/choice.35-4455 · Cited by 5,897
Use of U.S. Croplands for Biofuels Increases Greenhouse Gases Through Emissions from Land-Use Change
Searchinger, T., Heimlich, R., Houghton, R. A., Dong, F., Elobeid, A., Fabiosa, J., Tokgoz, S., Hayes, D., & Yu, T.-H. (2008) · Science · doi:10.1126/science.1151861 · Cited by 4,888 · cited 1×
“Many authors have identified critical challenges associated with bioenergy expansion (Cook and Beyea 2000; Searchinger et al. 2008, 2009; Searchinger 2010; Zanchi et al.”
Land Clearing and the Biofuel Carbon Debt
Fargione, J., Hill, J., Tilman, D., Polasky, S., & Hawthorne, P. (2008) · Science · doi:10.1126/science.1152747 · Cited by 3,902
Irreversible climate change due to carbon dioxide emissions
Solomon, S., Plattner, G.-K., Knutti, R., & Friedlingstein, P. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0812721106 · Cited by 3,217 · cited 1×
“According to Adair and McKeever (2009), the average-size singlefamily house is currently 2,470 ft2 and requires approximately 14,800 board feet of lumber, not including structural and nonstructural panels.”
BackgroundCombustion properties of biomass
Jenkins, B. M., Baxter, L. L., Miles, T. R., & Miles, T. R. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00059-3 · Cited by 1,938
Beneficial biofuels—the food, energy, and environment trilemma
Tilman, D., Socolow, R., Foley, J. A., Hill, J., Larson, E., Lynd, L., Pacala, S., Reilly, J., Searchinger, T., Somerville, C., et al. (2009) · Science · doi:10.1126/science.1177970 · Cited by 1,596 · cited 1×
“2010), but others note that sustainably harvested wood and forest residues have the potential to substantially displace fossil fuels (Fargione et al. 2008, Tilman et al. 2009).”
BackgroundU.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry
Downing, M., Eaton, L. M., Graham, R. L., Langholtz, M. H., Perlack, R. D., Turhollow Jr, A. F., Stokes, B., & Brandt, C. C. (2011) · doi:10.2172/1023318 · Cited by 1,004
Forest Products and Wood Science An Introduction
Shmulsky, R., & Jones, P. D. (2011) · doi:10.1002/9780470960035 · Cited by 620
Fixing a Critical Climate Accounting Error
Searchinger, T. D., Hamburg, S. P., Melillo, J., Chameides, W., Havlik, P., Kammen, D. M., Likens, G. E., Lubowski, R. N., Obersteiner, M., Oppenheimer, M., et al. (2009) · Science · doi:10.1126/science.1178797 · Cited by 501
Residential Energy Consumption Survey (2016)
Liao, H. (2019) · Harvard Dataverse · doi:10.7910/dvn/agbpxs · Cited by 415
Research works printed but not linked: 4
- McIver, C. P., C. B. Sorenson, C. E. Keegan, T. A. Morgan, and J. Menlove. 2013. Montana's forest products industry and timber harvest, 2009. Resource Bulletin RMRS-RB-16. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 42pp.
- Morgan, T. A., C. P. McIver, C. B. Sorenson, C. E. Keegan, and S. W. Hayes. 2011. Montana's forest economy: A roller coaster ride through the first decade of the 21st century. Mont. Bus. Q. 49(4):2–7.
- Simpson, W. T. (Ed.). 1991. Dry kiln operator's manual. Agricultural Handbook 188. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 274pp.
- Wilson, P. L., J. W. Funck, and R. B. Avery. 1987. Fuelwood characteristics of northwestern conifers and hardwoods. Research Bulletin 60. Forest Research Laboratory, Oregon State University, Corvallis. 47pp.
Cited by
Pieratti, E., Paletto, A., Atena, A., Bernardi, S., Mathis, P., Dominik, P., Romagnoli, M., Teston, F., Voglar, G. E., Grebenc, T., et al. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118449 · Cited by 49
Nzotcha, U., & Kenfack, J. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.11.015 · Cited by 48
Diversity of properties of sawmill residues used as feedstock for energy generation
Dudziec, P., Stachowicz, P., & Stolarski, M. J. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.12.002 · Cited by 34
A comprehensive review of heat pump wood drying technologies
Gao, L., Fix, A. J., Seabourne, T., Pei, Y., Adegbaye, P., Hwang, Y., Yang, B., & Radermacher, R. (2024) · Energy · doi:10.1016/j.energy.2024.133241 · Cited by 30
Wood Chip Production Efficiency Depending on Chipper Type
Stolarski, J., Wierzbicki, S., Nitkiewicz, S., & Stolarski, M. J. (2023) · Energies · doi:10.3390/en16134894 · Cited by 20
Metadata
- Authors
- Loeffler, D., Anderson, N., Morgan, T. A., & Sorenson, C. B.
- Venue
- Forest Products Journal
- Publisher
- Forest Products Society
- Published
- 2016
- Volume
- 66
- Issue
- 3-4
- Pages
- 155-163
- ISSN
- 0015-7473 (ISSN-L)
- OpenAlex
- W2286694132
- Cited by
- 14
- References
- 33
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 1 · 2023: 3 · 2022: 1 · 2019: 1 · 2018: 2 · 2017: 1 · 2016: 1
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Forest Products Journal (publishedVersion)
- Topics
- Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Forest Biomass Utilization and Management
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Energy Efficiency and Management
- Keywords
- wood product manufacturing, renewable energy, wood drying, power consumption, bioenergy, Montana
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On-Site Energy Consumption at Softwood Sawmills in Montana. https://app.cochat.ai/papers/10.13073/fpj-d-14-00108
- The paper
- Loeffler, D., Anderson, N., Morgan, T. A., & Sorenson, C. B. (2016). On-Site Energy Consumption at Softwood Sawmills in Montana. Forest Products Journal. https://doi.org/10.13073/fpj-d-14-00108
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.