The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Physico-Chemical Properties of Synthetic Hydrotalcites in Relation to Composition
Abstract
Hydrotalcite solid solutions were prepared by coprecipitation followed by hydrothermal treatment between 150° and 250°C. Based on the structural formula [Mg 1−x Al x(OH)2]x+[(CO 3)x/2 • mH 2 O]x−, pure solid solutions were formed in the range A1/(A1 + Mg) = 0.2 to 0.33, where m = (1 − 3x/2). Maximum crystallite size was achieved by hydrothermal treatment between 180° and 200°C, with x = 0.337 to 0.429. Crystal strain was also minimized at these values of x. The adsorption capacity for Naphthol Yellow S increased as x increased and reached a maximum (1.56 × 10−6 moles/m 2) when x = 0.287, a value eight times larger than that of Mg(OH)2. A weak endothermic DTA peak at about 350°C is probably due to the loss of structural water in the main layer of the structure. On calcination between 400° and 700°C, only periclase was detected, probably containing Al in solid solution. Hydration of the calcined product resulted in the reconstruction of the original hydrotalcite structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
X-ray line broadening from filed aluminium and wolfram
Williamson, G. K., & Hall, W. H. (1953) · Acta Metallurgica · doi:10.1016/0001-6160(53)90006-6 · Cited by 10,530
Miyata, S. (1975) · Clays and Clay Minerals · doi:10.1346/ccmn.1975.0230508 · Cited by 989
Self-citationThe crystal structure of pyroaurite
Allmann, R. (1968) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740868003511 · Cited by 578
Crystal structures of some double hydroxide minerals
Taylor, H. F. W. (1973) · Mineralogical Magazine · doi:10.1180/minmag.1973.039.304.01 · Cited by 529
The measurement of particle size by the X-ray method
Jones, F. W. (1938) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1938.0079 · Cited by 321
Gastuche, M. C., Brown, G., & Mortland, M. M. (1967) · Clay Minerals · doi:10.1180/claymin.1967.007.2.05 · Cited by 189
Brown, G., & Gastuche, M. C. (1967) · Clay Minerals · doi:10.1180/claymin.1967.007.2.06 · Cited by 127
Differential thermal analysis curves of carbonate minerals
Beck, C. W. (1950) · American Mineralogist · Cited by 123
Cited by
Hydrotalcite-type anionic clays: Preparation, properties and applications.
Cavani, F., Trifirò, F., & Vaccari, A. (1991) · Catalysis Today · doi:10.1016/0920-5861(91)80068-k · Cited by 5,980
Anion-Exchange Properties of Hydrotalcite-Like Compounds
Miyata, S. (1983) · Clays and Clay Minerals · doi:10.1346/ccmn.1983.0310409 · Cited by 1,744
Self-citationApplication of layered double hydroxides for removal of oxyanions: A review
Goh, K.-H., Lim, T.-T., & Dong, Z. (2008) · Water Research · doi:10.1016/j.watres.2007.10.043 · Cited by 1,708
Structure and Surface and Catalytic Properties of Mg-Al Basic Oxides
Di Cosimo, J. I., Dı́ez, V. K., Xu, M., Iglesia, E., & Apesteguı́a, C. R. (1998) · Journal of Catalysis · doi:10.1006/jcat.1998.2161 · Cited by 1,221
Synthesis of anionic clay minerals (mixed metal hydroxides, hydrotalcite)
Reichle, W. (1986) · Solid State Ionics · doi:10.1016/0167-2738(86)90067-6 · Cited by 852
Metadata
- Authors
- Miyata, S.
- Venue
- Clays and Clay Minerals
- Publisher
- Cambridge University Press (CUP)
- Published
- 1980-02
- Volume
- 28
- Issue
- 1
- Pages
- 50-56
- ISSN
- 0009-8604 (ISSN-L)
- 1552-8367
- OpenAlex
- W2145708488
- Cited by
- 834
- References
- 8
- FWCI
- 0.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.