An Attempt to Minimize the Cost of Extracting Lithium from Boron Clays Through Robust Process Design
Open accessThe DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
In this study a robust design method is developed for extracting Li from boron (B) clays with the aim of minimizing cost and maximizing productivity. Lithium is commercially extracted from brines and certain minerals. Its extraction from clays has previously been found to be expensive, a major part of the extraction cost being attributed to the raw materials used. In this study, raw materials from lower-cost resources are used without applying any standardization to them and this might increase variation in the results. To minimize the variation, and achieve high extraction levels, robust design, statistical design and analysis of experiments, and response surface methodologies are utilized. As a result, consistently higher extraction levels have been achieved compared to previous studies. The experiments were conducted using the Bigadiç boron clay fields in Turkey. However, the method is generally applicable to other cases also.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, a process for lithium extraction from borax-containing clays has demonstrated that leveraging by-products and low-cost resources can significantly lower operating costs.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [205]
Citations
Cites
Empirical Model Building and Response Surfaces
Freeny, A. (1988) · Technometrics · doi:10.1080/00401706.1988.10488371 · Cited by 5,235
Linear and nonlinear programming.
(1986) · Mathematics and Computers in Simulation · doi:10.1016/0378-4754(86)90092-3 · Cited by 4,805
Linear and Nonlinear Programming
Luenberger, D. G., & Ye, Y. (2008) · International Series in Operations Research & Management Science · doi:10.1007/978-0-387-74503-9 · Cited by 2,804
Design and Analysis of Experiments
Gupta, A. K., & Kabe, D. G. (2013) · WORLD SCIENTIFIC eBooks · doi:10.1142/8889 · Cited by 1,241
Introduction to Quality Engineering: Designing Quality into Products and Processes
田口, 玄. (1986) · Cited by 1,209
Introduction to Quality Engineering: Designing Quality into Products and Processes
Taguchi, G. (1986) · Cited by 1,153
Empirical Model-Building and Response Surfaces.
Pike, D. J., Box, G. E. P., & Draper, N. R. (1988) · Journal of the Royal Statistical Society. Series A (Statistics in Society) · doi:10.2307/2982196 · Cited by 716
Taguchi's Parameter Design: A Panel Discussion
Nair, V. N., Abraham, B., MacKay, J., Box, G., Kacker, R. N., Lorenzen, T. J., Lucas, J. M., Myers, R. H., Vining, G. G., Nelder, J. A., et al. (1992) · Technometrics · doi:10.1080/00401706.1992.10484904 · Cited by 713
Combining Taguchi and Response Surface Philosophies: A Dual Response Approach
Vining, G. G., & Myers, R. H. (1990) · Journal of Quality Technology · doi:10.1080/00224065.1990.11979204 · Cited by 651
Introduction to Quality Engineering: Designing Quality Into Products and Processes
Parr, W. C. (1989) · Technometrics · doi:10.1080/00401706.1989.10488520 · Cited by 629
Response Surface Alternatives to the Taguchi Robust Parameter Design Approach
Myers, R. H., Khuri, A. I., & Vining, G. (1992) · The American Statistician · doi:10.1080/00031305.1992.10475869 · Cited by 334
A Nonlinear Programming Solution to the Dual Response Problem
Del Castillo, E., & Montgomery, D. C. (1993) · Journal of Quality Technology · doi:10.1080/00224065.1993.11979454 · Cited by 299
Quality Engineering Using Robust Design
Menten, T. (1991) · Technometrics · doi:10.1080/00401706.1991.10484810 · Cited by 296
Design optimisation of aluminium recycling processes using Taguchi technique
Khoei, A. R., Masters, I., & Gethin, D. T. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00273-x · Cited by 119
A nonlinear programming approach to the parameter design problem
Fathi, Y. (1991) · European Journal of Operational Research · doi:10.1016/0377-2217(91)90070-c · Cited by 41
Clay mineralogy of Turkish borate deposits
Ataman, G., & Baysal, O. (1978) · Chemical Geology · doi:10.1016/0009-2541(78)90033-5 · Cited by 25
Simple and robust design of chemical plants
Koolen, J. L. A. (1998) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(98)00062-3 · Cited by 11
Advances in lithium-ion battery research and technology
Abraham, D. P. (2002) · JOM · doi:10.1007/bf02822612 · Cited by 9
Applying numerical Taguchi optimization to metal forming
Srinivasan, R., & Chaudhary, A. (1990) · JOM · doi:10.1007/bf03220867 · Cited by 4
Research works printed but not linked: 7
- (2004), Metals Week, 75, 12
- Mordoğan, (1995), Endüstriyel Hammaddeler Sempozyumu, 185
- (2004), Platts Metals Week, 75, 2
- Fishwick, (1974), Application of Lithium in Ceramics.
- Montgomery, (2001), Design and Analysis of Experiments.
- (2004), Industrial Minerals, 441, 94
- Beşkardeş, (1992), Bigadiç killerindeki lityum mineralleri potansiyellerinin araştirilmasi ve değerlendirilmesi (Investigation and evaluation of lithium potentials in Bigadiç clays)
Cited by
Tran, T., & Luong, V. T. (2015) · Lithium Process Chemistry · doi:10.1016/b978-0-12-801417-2.00003-7 · Cited by 119
Zhu, L., Gu, H., Wen, H., & Yang, Y. (2021) · Hydrometallurgy · doi:10.1016/j.hydromet.2021.105759 · Cited by 75
Marazuela, M. A., Ayora, C., Vázquez-Suñé, E., Olivella, S., & García-Gil, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.139959 · Cited by 36
Ruberti, M. (2024) · Sustainability · doi:10.3390/su17010160 · Cited by 35
Büyükburç, A., Maraşlıoğlu, D., Bilici, M. S. U., & Köksal, G. (2005) · Minerals Engineering · doi:10.1016/j.mineng.2005.11.003 · Cited by 33
Self-citation
Metadata
- Authors
- Büyükburç, A., & Köksal, G.
- Affiliations
- Middle East Technical University (TR)
- ORCID
- Köksal, Gülser
- Venue
- Clays and Clay Minerals
- Publisher
- Cambridge University Press (CUP)
- Published
- 2005-06
- Volume
- 53
- Issue
- 3
- Pages
- 301-309
- ISSN
- 0009-8604 (ISSN-L)
- 1552-8367
- OpenAlex
- W2072467861
- Cited by
- 18
- References
- 19
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 3 · 2022: 2 · 2021: 1 · 2020: 1 · 2018: 1 · 2015: 1
- FWCI
- 0.83
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- Locations
- Clays and Clay Minerals (publishedVersion)
- OpenMETU (Middle East Technical University) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Social Sciences › Decision Sciences › Management Science and Operations Research › Optimal Experimental Design Methods
- Physical Sciences › Materials Science › Metals and Alloys › Metal Extraction and Bioleaching
- Keywords
- lithium recovery, robust design, process design, raw material variability, response surface methodology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.