Solubility and Thermodynamic Properties of Carbonate-Bearing Hydrotalcite—Pyroaurite Solid Solutions with A 3:1 Mg/(Al+Fe) Mole Ratio
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The naturally occurring layered double hydroxides (LDH, or anionic clays) are of particular interest in environmental geochemistry because of their ability to retain hazardous cations and especially anions. However, incorporation of these minerals into predictive models of water-rock interaction in contaminant environments, including radioactive-waste repositories, is hampered by a lack of thermodynamic and stability data. To fill part of this gap the present authors have derived properties of one of the complex multicomponent solid solutions within the LDH family: the hydrotalcite-pyroaurite series, Mg 3(Al 1−xFex)(OH)8(CO 3)0.5·2.5H 2 O. Members of the hydrotalcite-pyroaurite series with fixed Mg II/(Al III+Fe III) = 3 and various Fe III/(Fe III+Al III) ratios were synthesized by co-precipitation and dissolved in long-term experiments at 23±2°C and pH = 11.40±0.03. The chemical compositions of co-existing solid and aqueous phases were determined by inductively coupled plasma-optical emission spectroscopy, thermogravimetric analysis, and liquid scintillation counting of 55 Fe tracers; X-ray diffraction and Raman were used to characterize the solids. Based on good evidence for reversible equilibrium in the experiments, the thermodynamic properties of the solid solution were examined using total-scale Lippmann solubility products, ΣΠ T. No significant difference was observed between values of SPT from co-precipitation and from dissolution experiments throughout the whole range of Fe/Al ratios. A simple ideal solid-solution model with similar end-member ΣΠ T values (a regular model with 0 < W G < 2 kJ mol −1 sufficient to describe the full range of intermediate mineral compositions. In turn, this yielded the first estimate of the standard Gibbs free energy of the pyroaurite end member, G298,Pyro = −3882.60±2.00 kJ/mol, consistent with G298,Htlco = −4339.85 kJ/mol of the hydrotalcite end member, and with the whole range of solubilities of the mixed phases. The molar volumes of the solid-solution at standard conditions were derived from X-ray data. Finally, Helgeson’s method was used to extend the estimates of standard molar entropy and heat capacity of the end members over the pressure-temperature range 0−70°C and 1–100 bar.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nagra/PSI Chemical Thermodynamic Data Base 01/01
Hummel, W., Berner, U., Curti, E., Pearson, F. J., & Thoenen, T. (2002) · Radiochimica Acta · doi:10.1524/ract.2002.90.9-11_2002.805 · Cited by 705
Self-citation
Cited by
Lothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D., & Myers, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.018 · Cited by 1,250
Self-citationImproving the structural consistency of C-S-H solid solution thermodynamic models
Kulik, D. A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.01.012 · Cited by 348
Self-citationStability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions
Bernard, E., Zucha, W. J., Lothenbach, B., & Mäder, U. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106674 · Cited by 279
Phase diagrams for alkali-activated slag binders
Myers, R. J., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.006 · Cited by 241
Thermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
Metadata
- Authors
- Rozov, K. B., Berner, U., Kulik, D. A., & Diamond, L. W.
- Venue
- Clays and Clay Minerals
- Publisher
- Cambridge University Press (CUP)
- Published
- 2011-06
- Volume
- 59
- Issue
- 3
- Pages
- 215-232
- ISSN
- 0009-8604 (ISSN-L)
- 1552-8367
- OpenAlex
- W2313846999
- Cited by
- 51
- References
- 1
- FWCI
- 0.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solubility and Thermodynamic Properties of Carbonate-Bearing Hydrotalcite—Pyroaurite Solid Solutions with A 3:1 Mg/(Al+Fe) Mole Ratio. https://app.cochat.ai/papers/10.1346/ccmn.2011.0590301
- The paper
- Rozov, K. B., Berner, U., Kulik, D. A., & Diamond, L. W. (2011). Solubility and Thermodynamic Properties of Carbonate-Bearing Hydrotalcite—Pyroaurite Solid Solutions with A 3:1 Mg/(Al+Fe) Mole Ratio. Clays and Clay Minerals. https://doi.org/10.1346/ccmn.2011.0590301
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.