The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Radiative heating and cooling with spectrally selective surfaces
Abstract
Matter continuously exchanges energy with its surroundings. This exchange can be dominated by radiation, conduction, or convection. In this brief review we discuss how proper design of radiative surface properties can be used for heating and cooling purposes. The desired properties can be understood once it is realized that solar and terrestrial radiation take place in different wavelength ranges and that only part of the solar spectrum is useful for vision and for photosynthesis in plants. These facts allow the possibility of tailoring the spectral absorptance, emittance, reflectance, and transmittance of a surface to meet different demands in different wavelength intervals, i.e., to take advantage of spectral selectivity. One example is the selective surface for efficient photothermal conversion of solar energy, which has high absorptance over the solar spectrum but low emittance for the longer wavelengths relevant to thermal reradiation. Below we discuss the pertinent spectral radiative properties of our ambience. These data are then used as background to the subsequent sections treating four examples of spectrally selective surfaces. The first example is the previously mentioned selective surface for converting solar radiation to useful heat. The second example considers surfaces capable of reaching low temperatures by benefiting from the spectral emittance of the clear night sky. The third example concerns two related types of transparent heat mirror. The fourth example, finally, treats radiative cooling of green leaves; this part is included since it gives a nice example of how nature solves a difficult problem in an elegant and efficient way. This example hence provides an interesting background to the other cruder types of artificial selective surfaces. Throughout our discussion we treat the ideal spectral properties, give an illustrative experimental example of how well this goal can be realized, and-where this is possible-show a corresponding theoretical curve indicating to what extent the measured results can be theoretically understood.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Optical constants of transition metals: Ti, V, Cr, Mn, Fe, Co, Ni, and Pd
Johnson, P., & Christy, R. (1974) · Physical Review B · doi:10.1103/physrevb.9.5056 · Cited by 1,759
Gates, D. M., Keegan, H. J., Schleter, J. C., & Weidner, V. R. (1965) · Applied Optics · doi:10.1364/ao.4.000011 · Cited by 1,417
Optical Properties of Ag and Cu
Ehrenreich, H., & Philipp, H. R. (1962) · Physical Review · doi:10.1103/physrev.128.1622 · Cited by 1,266
Refractive Indices of Rutile and Sphalerite
DeVore, J. R. (1951) · Journal of the Optical Society of America · doi:10.1364/josa.41.000416 · Cited by 1,041
Optical constants from the far infrared to the x-ray region: Mg, Al, Cu, Ag, Au, Bi, C, and Al_2O_3
Hagemann, H.-J., Gudat, W., & Kunz, C. (1975) · Journal of the Optical Society of America · doi:10.1364/josa.65.000742 · Cited by 890
Effective medium models for the optical properties of inhomogeneous materials
Niklasson, G. A., Granqvist, C. G., & Hunderi, O. (1981) · Applied Optics · doi:10.1364/ao.20.000026 · Cited by 664
Self-citationElectrical conductivity in inhomogeneous media
Landauer, R. (1978) · AIP Conference Proceedings · doi:10.1063/1.31150 · Cited by 655
The radiative cooling of selective surfaces
Catalanotti, S., Cuomo, V., Piro, G., Ruggi, D., Silvestrini, V., & Troise, G. (1975) · Solar Energy · doi:10.1016/0038-092x(75)90062-6 · Cited by 571
Optical Properties of Aluminum
Ehrenreich, H., Philipp, H. R., & Segall, B. (1963) · Physical Review · doi:10.1103/physrev.132.1918 · Cited by 547
Cited by
Transparent conductors as solar energy materials: A panoramic review
Granqvist, C. G. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.031 · Cited by 1,566
Self-citationElectrochromics for smart windows: Oxide-based thin films and devices
Granqvist, C. G. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.02.002 · Cited by 1,080
Self-citationRadiative cooling: A review of fundamentals, materials, applications, and prospects
Zhao, B., Hu, M., Ao, X., Chen, N., & Pei, G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.018 · Cited by 907
Radiative cooling to deep sub-freezing temperatures through a 24-h day–night cycle
Chen, Z., Zhu, L., Raman, A., & Fan, S. (2016) · Nature Communications · doi:10.1038/ncomms13729 · Cited by 871
Radiative Cooling: Principles, Progress, and Potentials
Hossain, M. M., & Gu, M. (2016) · Advanced Science · doi:10.1002/advs.201500360 · Cited by 791
Metadata
- Authors
- Granqvist, C. G.
- Venue
- Applied Optics
- Publisher
- Optica Publishing Group
- Published
- 1981-08-01
- Volume
- 20
- Issue
- 15
- Pages
- 2606
- ISSN
- 0003-6935 (ISSN-L)
- 1539-4522
- OpenAlex
- W2036923742
- Cited by
- 309
- References
- 49
- FWCI
- 108.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Radiative heating and cooling with spectrally selective surfaces. https://app.cochat.ai/papers/10.1364/ao.20.002606
- The paper
- Granqvist, C. G. (1981). Radiative heating and cooling with spectrally selective surfaces. Applied Optics. https://doi.org/10.1364/ao.20.002606
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.