Cited by 49Terahertz technology and applicationsLaser-Matter Interactions and ApplicationsOrbital Angular Momentum in Optics

Terahertz beam propagation measured through three-dimensional amplitude profile determination

Reiten, Matthew T., Harmon, Stacee A., Cheville, Richard Alan·2003·Journal of the Optical Society of America B

Abstract

To determine the spatio-temporal field distribution of freely propagating terahertz bandwidth pulses, we measure the time-resolved electric field in two spatial dimensions with high resolution. The measured, phase-coherent electric-field distributions are compared with an analytic model in which the radiation from a dipole antenna near a dielectric interface is coupled to free space through a spherical lens. The field external to the lens is limited by reflection at the lens–air dielectric interface, which is minimized at Brewster’s angle, leading to an annular field pattern. Field measurements compare favorably with theory. Propagation of terahertz beams is determined both by assuming a TEM0,0 Gaussian profile as well as expanding the beam into a superposition of Laguerre–Gauss modes. The Laguerre–Gauss model more accurately describes the beam profile for free-space propagation and after propagating through a simple optical system. The accuracy of both models for predicting far-field beam patterns depend upon accurately measuring complex field amplitudes of terahertz beams.

Integrity signals

Registry

Crossref · 10.1364/josab.20.002215

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The possible presence of higher-order Gaussian modes in the THz beam does not invalidate a simplified description for spectroscopic purposes.

    “In the literature one finds measurements showing the possible presence of higher-order Gaussian modes in the THz beam [10]; however, later it will become clear that the magnitude of the effect is such that for spectroscopic purposes a simplified description is sufficient.”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Reiten, M. T., Harmon, S. A., & Cheville, R. A.
Affiliations
Oklahoma State University (US)
Venue
Journal of the Optical Society of America B
Published
2003-10-01
Volume
20
Issue
10
Pages
2215
ISSN
  • 0740-3224 (ISSN-L)
  • 1520-8540
OpenAlex
W2134854195
Cited by
49
References
1
Citations by year
2025: 2 · 2024: 1 · 2023: 1 · 2020: 2 · 2018: 2 · 2017: 1 · 2016: 2 · 2015: 5 · 2014: 2 · 2013: 2 · 2012: 3
FWCI
4.68
Type
journal article
Language
en
Open access
closed
Locations
Journal of the Optical Society of America B (publishedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Terahertz technology and applications
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Laser-Matter Interactions and Applications
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Orbital Angular Momentum in Optics
Keywords
dipole antenna, dielectric interfaces, spherical lens, polarization angle, Laguerre-Gaussian beams, far-field radiation pattern, free-space propagation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review